低信噪比条件下改进ESPRIT方法

在低信噪比时,针对估计信源DOA实时性的问题,提出了一种新的适合于ESPRIT算法的多级维纳滤波器(MSWF)结构,找到了一种能判别信号子空间的方法。首先将多级维纳滤波器(MSWF)与ESPRIT算法相结合,采用多级维纳滤波器(MSWF)的前向递推,得到子空间,不需要通过特征值分解。低信噪比时,针对噪声子空间泄漏到信号子空间的现象,提出一种判别方法,找到了更精确的信号子空间,结合ESPRIT方法实现信号的DOA估计。由于该算法实现了真实的信号子空间的判断,因此,比传统基于MSWF算法具有更高地估计精度。特别是在低信噪比时,增强了算法的实用性,仿真结果证明了算法的有效性。     

数据链中MSK信号正交调制方法研究

数据链具有较强的保密性和抗干扰能力,是美军对敌实施有效打击的重要手段之一。在深入分析MSK信号正交调制机理及可行性的基础上,选用一跳单脉冲数据链信号的有效驻留时间为仿真对象,对MSK信号的正交调制方法进行了仿真。仿真结果表明,采用基于正交模式的MSK信号调制方法,可高效、准确的生成MSK信号。     

基于冲量法实现航天器编队重构控制仿真的研究

针对航天器编队重构的可视性不强,提出一种冲量法实现航天器编队重构的视景仿真技术。双脉冲机动是指航天器对空间目标的近轨道转移时,所需要的两次冲量机动。应用航天器之间相对运动原理,以空间目标轨道六要素为目标函数,通过调整航天器轨道参数对空间目标进行编队重构,有摆动绕飞转移至摆动式悬挂绕飞,进而得出了航天器转移摆动式悬挂绕飞编队到所需冲量基本关系,从而实现航天器对空间目标进行编队重构控制。     

基于阶次分析方法的齿轮箱齿轮故障诊断研究

研究了旋转机械非稳态振动信号分析中的计算阶次分析方法．分析了该方法在重采样过程中的采样率设置规则．利用插值算法实现了对等时间间隔采样的齿轮箱振动信号的角域重采样,将其应用于齿轮箱加速过程故障诊断,成功识别了齿面磨损故障．结果显示,阶次分析法能有效避免传统频谱方法出现的频率模糊现象,在处理非平稳转速变化信号时具有独特的优越性．     

基于占有率的信号相位交通状态实时判别模型

在国内交通检测手段的现实背景下,各种道路交通状态判别模型的可靠性和实用性一直不足。因此基于车道战略检测器和战术检测器的时间占有率提出了一种新的实用的相位交通状态判别模型,其中包括检测器的布设,占有率阈值的确定,相位交通状态的判别方法。通过VISSIM4.2仿真实验证明,该模型可以准确地判定符合人们主观判断的相位交通状态,并且可以很好地应用目前普遍采用的检测手段,实用性强。     

Three-dimensional coordinates test method with uncertain projectile proximity explosion position based on dynamic seven photoelectric detection screen

To objectively obtain the three-dimensional coordinates of the projectile fuze proximity explosion when projectile intersects the head of missile target, we propose a dynamic seven photoelectric detection screen test method, which is made up of six plane detection screens and a flash photoelectric dynamic detection screen. The three-dimensional coordinates calculation model of the projectile proximity explosion position based on seven plane detection screens with dynamic characteristics is established. According to the relation of the dynamic seven photoelectric detection screen planes and the time values, the analytical function of the projectile proximity explosion position parameters under non-linear motion is derived. The projectile signal filtering method based on discrete wavelet transform is explored in this work. Additionally, the projectile signal recognition algorithm using an improved particle swarm is proposed. Based on the characteristics of the time duration and the signal peak error for the projectile passing through the detection screen, the signals attribution of the same projectile passing through six detection screens are analyzed for obtaining precise time values of the same projectile passing through the detection screens. On the basis of the projectile fuze proximity explosion test, the linear motion model and the proposed non-linear motion model are used to calculate and compare the same group of projectiles proximity explosion position parameters. The comparison of test results verifies that the proposed test method and calculation model in this work accurately obtain the actual projectile proximity explosion position parameters.     

一种基于GPU的数字信道化处理方法

为了减少数字信道化接收机的开发成本,提高吞吐量与处理速度,对被动雷达截获信号数字信道化接收机的结构进行了研究,提出了一种基于GPU的数字信道化接收机的实现方法。该高效结构不仅节省了硬件成本,缩短了开发周期,而且加快了处理速度,达到了准实时性。实验结果表明:基于GPU的运算平台与CPU平台相比较,处理速度提高一倍左右。     

电驱动装甲车辆双重转向控制联合仿真

为了提高轮毂电机驱动装甲车辆转向的灵活性及越野机动性能,借鉴履带车辆滑移转向思想,采用双重转向控制策略。以车辆的横摆角速度为控制目标,设计了自抗扰控制器,通过调整两侧轮毂电机转矩输出产生直接横摆力矩,进而调节车辆横摆角速度,实现装甲车辆双重转向。在Adams中建立车辆动力学模型的基础上,构建Adams与Matlab环境中的联合仿真模型,并进行了联合仿真,结果表明,基于直接横摆力矩控制的双重转向增大了外侧动力输出,减小了车辆在中低速转向时转向半径,提高了车辆的转向性能。     

Single channel source separation of radar fuze mixed signal based on phase difference analysis

A new method based on phase difference analysis is proposed for the single-channel mixed signal separation of single-channel radar fuze. This method is used to estimate the mixing coefficients of de-noised signals through the cumulants of mixed signals, solve the candidate data set by the mixing coefficients and signal analytical form, and resolve the problem of vector ambiguity by analyzing the phase differences. The signal separation is realized by exchanging data of the solutions. The waveform similarity coefficients are calculated, and the time–frequency distributions of separated signals are analyzed. The results show that the proposed method is effective.     

基于粒子群算法的H_∞混合灵敏度控制研究

针对步进电机存在负载摄动和失步超步问题,提出了一种基于粒子群优化算法的混合灵敏度设计方法。在H∞混合灵敏度约束下,采用粒子群算法寻找能够反映系统特性的适应度函数最优值,在搜索到合适的加权阵基础上,利用Matlab得到了H∞最优控制器,并利用优化控制器对步进电机进行控制仿真实验。实验结果表明：该系统具有响应快速平稳、抗负载扰动强等特点。