柔性长鳍扭波推进数学模型分析

以"尼罗河魔鬼"鱼的柔性长背鳍扭波推进模式为研究对象,通过观察活鱼的游动模式,提取影响扭波推进的运动学要素,建立了描述柔性长背鳍扭波推进时动态曲面的数学模型。研究了鳍条仰角与摆动规律对鳍面的影响。最后,用细长体理论分析并计算出推力分布。研究表明,鳍条仰角在φ=85°的情况下所形成的鳍面与垂直鳍条所形成的鳍面相比,其最大偏离值与鳍长之比为1.7%,可以用垂直于基线的鳍条制作模型;鳍条按正弦规律摆动时所形成的扭波波形鳍面与实鱼鳍面相似。     

面内阶跃载荷下薄板弹性动力屈曲差分解

根据薄板微元的动力平衡分析导出薄板动力屈曲控制方程,由屈曲瞬间能量转换率守恒条件得出一个压缩波前屈曲变形的附加约束方程,由此得到求解薄板动力屈曲问题的完备定解条件.以受载边夹支的薄板为倒,利用有限差分法得出了薄板前三阶动力屈曲模态和相应的两个特征参数值,并对比分析了薄板静、动力屈曲的差别.分析表明,薄板动力屈曲过程中产生屈曲动能,比静力屈曲要吸收更多的外部能量.     

Optimal capacity in a coordinated supply chain

We consider a supply chain in which a retailer faces a stochastic demand, incurs backorder and inventory holding costs and uses a periodic review system to place orders from a manufacturer. The manufacturer must fill the entire order. The manufacturer incurs costs of overtime and undertime if the order deviates from the planned production capacity. We determine the optimal capacity for the manufacturer in case there is no coordination with the retailer as well as in case there is full coordination with the retailer. When there is no coordination the optimal capacity for the manufacturer is found by solving a newsvendor problem. When there is coordination, we present a dynamic programming formulation and establish that the optimal ordering policy for the retailer is characterized by two parameters. The optimal coordinated capacity for the manufacturer can then be obtained by solving a nonlinear programming problem. We present an efficient exact algorithm and a heuristic algorithm for computing the manufacturer's capacity. We discuss the impact of coordination on the supply chain cost as well as on the manufacturer's capacity. We also identify the situations in which coordination is most beneficial. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

火箭弹防静电短路卡抗静电性能实验研究

通过实验研究了火箭弹系统在安装防静电短路卡前后静态电阻的变化 ,提出了利用脉冲电流发生器测定安装防静电短路卡后系统动态电阻的方法。研究表明 ,安装防静电短路卡后 ,系统动态电阻很小 (小于30mΩ) ,火箭弹抗静电性能明显提高     

行星变速箱换档过程动态仿真研究

从传动系行星排传递单元和构件出发,建立了N自由度行星变速箱运动学数学模型,并运用该模型对三自由度行星变速箱进行了换档过程的动态仿真。     

Strategic capacity decision‐making in a stochastic manufacturing environment using real‐time approximate dynamic programming

In this study, we illustrate a real‐time approximate dynamic programming (RTADP) method for solving multistage capacity decision problems in a stochastic manufacturing environment, by using an exemplary three‐stage manufacturing system with recycle. The system is a moderate size queuing network, which experiences stochastic variations in demand and product yield. The dynamic capacity decision problem is formulated as a Markov decision process (MDP). The proposed RTADP method starts with a set of heuristics and learns a superior quality solution by interacting with the stochastic system via simulation. The curse‐of‐dimensionality associated with DP methods is alleviated by the adoption of several notions including “evolving set of relevant states,” for which the value function table is built and updated, “adaptive action set” for keeping track of attractive action candidates, and “nonparametric k nearest neighbor averager” for value function approximation. The performance of the learned solution is evaluated against (1) an “ideal” solution derived using a mixed integer programming (MIP) formulation, which assumes full knowledge of future realized values of the stochastic variables (2) a myopic heuristic solution, and (3) a sample path based rolling horizon MIP solution. The policy learned through the RTADP method turned out to be superior to polices of 2 and 3. © 2010 Wiley Periodicals, Inc. Naval Research Logistics 2010     

矩阵外积法Kalman滤波器在动态GPS定位中的应用

由于计算机有效字长的限制,滤波算法在计算机上实施时易于产生误差积累,误差协方差失去正定性或对称性,从而出现数值计算中的不稳定现象.一般情况下,当状态变量维数超过10时,滤波过程中出现滤波结果不稳定现象概率增大.为了解决滤波器数值计算不稳定问题,实践中提出并应用了许多方法,如自适应滤波、固定增益滤波、平方根滤波等.这些算法的不足是计算繁琐,效率低下.提出一个基于矩阵外积法所设计的快速、稳定的滤波算法,该卡尔曼滤波算法速度快,效率高,数值稳定性好,运算量少,将其应用于动态GPS定位验证了其有效性.     

一种含工作流Web信息系统的访问控制模型设计实现

包含工作流的Web信息系统是目前较为流行的一种系统应用模式。针对现有TRBAC模型在此类系统应用中存在的控制数据冗余、效率低下等不足改进提出了一种新的访问控制模型,该模型将RBAC与TRBAC进行结合,并按操作级别对角色与权限进行划分,通过引入流程历史信息等约束条件实现动态授权中操作权限与执行上下文的紧密关联,较好地实现了动、静态授权的分离,在保证系统安全的同时降低了访问控制策略的复杂度,为此类系统访问控制策略的制定提供了一个基本的参考性框架。最后以基于Web的办公自动化系统为例描述了模型在应用中的实现方案。     

基于差分GPS技术的舰载雷达动态标校

提出了一种基于差分GPS技术的舰载雷达动态标校方法,给出了根据大地坐标计算目标真值的算法;设计了一种舰载搜索雷达与跟踪雷达之间同步测量和适用于海上活动平台多传感器之间动态标校的数据处理方法。海上实践表明,这种方法具有精度高、实时性强的特点。     

Integrated capacity,demand, and production planning with subcontracting and overtime options

Models for integrated production and demand planning decisions can serve to improve a producer's ability to effectively match demand requirements with production capabilities. In contexts with price‐sensitive demands, economies of scale in production, and multiple capacity options, such integrated planning problems can quickly become complex. To address these complexities, this paper provides profit‐maximizing production planning models for determining optimal demand and internal production capacity levels under price‐sensitive deterministic demands, with subcontracting and overtime options. The models determine a producer's optimal price, production, inventory, subcontracting, overtime, and internal capacity levels, while accounting for production economies of scale and capacity costs through concave cost functions. We use polyhedral properties and dynamic programming techniques to provide polynomial‐time solution approaches for obtaining an optimal solution for this class of problems when the internal capacity level is time‐invariant. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007