未标定的视频小卫星深空目标凝视控制

设计了一种目标凝视自适应姿态控制方法,可以实现未知目标位置和未标定相机参数条件下的目标凝视控制。根据运动学方程提取出恰当的未知参数,从而将参数进行线性化表示;引入关于未知参数的势函数,确保参数矩阵的秩满足稳定性要求;采用了一个参数自更新律在线估计未知参数,提出了基于估计参数的自适应控制律。采用李雅普诺夫稳定性理论和芭芭拉特引理,证明了目标成像位置与期望成像位置的误差可以渐近收敛到零。仿真结果表明:目标位置未知且相机参数存在偏差的情况下,该自适应控制器能〖BHDWG8,WK10YQ,DK1*2,WK1*2D〗〖XCSC.TIF;%129%129〗听语音 聊科研与作者互动 够有效地对深空目标进行凝视观测。     

面向多最优解组合优化问题的决策求解算法

针对具有固定物品总和、多最优解特征的组合优化问题,以固定总和实数子集问题和购买鸡翅问题为例,给出了这类多最优解组合优化问题的形式化表示。在分析枚举等经典算法基础上,提出了基于整数状态表示和实数状态表示的0-1决策递归搜索多最优解动态规划算法。针对该算法在最优解数量较大时,时间复杂度趋向O(mⁿ)的问题,提出了基于相同决策路径合并和基于0-x决策的两种改进算法。实验中两种改进算法的计算时间基本符合与O(nb+nm)的正比关系,表明对于这类多最优解组合优化问题具有良好的求解性能。     

化学氧碘激光器光腔边界层的被动控制方法实验

针对化学氧碘激光器(Chemical Oxygen-Iodine Laser, COIL)光腔内边界层的被动控制方法,设计了三种实验件。光腔的上下壁板是可拆卸的,可以更换不同的实验件,以此比较边界层的控制效果。实验结果表明:开槽板、主流引射缝和开孔板在对光腔边界层的控制上都取得了一定的效果,改善了光腔特别是光腔后半部分的压力分布。在一定范围内,增加边界层的抽气量,可以进一步减小边界层厚度,降低光腔压力,同时提高COIL出光功率,但是当抽气量过大时,反而会降低出光功率。三种实验件中,主流引射的方式对抽气量最敏感,当抽气量增加至5%时,COIL出光功率已经明显下降;开孔板对抽气量不太敏感,抽气量从1%增加至7%,对COIL出光功率的影响并不明显。     

Tuning the reactivity of Al–Ni by fine coating of halogen-containing energetic composites

In this paper, various core-shell structured Al–Ni@ECs composites have been prepared by a spray-drying technique. The involved ECs refer to the energetic composites (ECs) of ammonium perchlorate/nitrocellulose (AP/NC, NA) and polyvinylidene fluoride/hexanitrohexaazaisowurtzitane (PVDF/CL-20, PC). Two Al–Ni mixtures were prepared at atomic ratios of 1:1 and 1:3 and named as Al/Ni and Al/3Ni, respectively. The thermal reactivity and combustion behaviors of Al–Ni@ECs composites have been comprehensively investigated. Results showed that the reactivity and combustion performance of Al–Ni could be enhanced by introducing both NA and PC energetic composites. Among which the Al/Ni@NA composite exhibited higher reactivity and improved combustion performance. The measured flame propagation rate (v = 20.6 mm/s), average combustion wave temperature (T_max = 1567.0 °C) and maximum temperature rise rate (γ_t = 1633.6 °C/s) of Al/Ni@NA are higher than that of the Al/Ni (v = 15.8 mm/s, T_max = 858.0 °C, and γ_t = 143.5 °C/s). The enhancement in combustion properties could be due to presence of the acidic gaseous products from ECs, which could etch the Al₂O₃ shell on the surface of Al particles, and make the inner active Al to be easier transported, so that an intimate and faster intermetallic reaction between Al and Ni would be realized. Furthermore, the morphologies and chemical compositions of the condensed combustion products (CCPs) of Al–Ni@ECs composites were found to be different depending on the types of ECs. The compositions of CCPs are dominated with the Al–Ni intermetallics, combining with a trace amount of Al₅O₆N and Al₂O₃.     

Dual-steering mode based on direct yaw moment control for multi-wheel hub motor driven vehicles:Theoretical design and experimental assessment

One of the main challenges for multi-wheel hub motor driven vehicles is the coordination of individual drivetrains to improve mobility and stability in the steering process.This paper proposes a dual-steering mode based on direct yaw moment control for enhancing vehicle steering ability in complex environ-ments.The control system is designed as a hierarchical structure,with a yaw moment decision layer and a driving force distribution layer.In the higher-level layer,the objective optimization function is con-structed to obtain the slip steering ratio,which represents the degree of vehicle slip steering in the dual-steering mode.A yaw moment controller using active disturbance rejection control theory is designed for continuous yaw rate control.When the actual yaw rate of the vehicle deviates from the reference yaw rate obtained by the vehicle reference model and the slip steering ratio,the yaw moment controller is actuated to determine the yaw moment demand for vehicle steering.In the lower-level layer,there is a torque distribution controller based on distribution rules,which meets the requirement of yaw moment demand without affecting the total longitudinal driving force of the vehicle.For verifying the validity and feasibility of the dual-steering mode,simulations were conducted on the hardware-in-loop real-time simulation platform.Additionally,corresponding real vehicle tests were carried out on an eight-wheel prototype vehicle.Test results were generally consistent with the simulation results,thereby demon-strating that the proposed dual-steering mode reduces steering radius and enhances the steering per-formance of the vehicle.     

Establishment,simulation and verification of firepower safety control model

On a narrow warship platform, the coordinated use of shipborne weapon systems may cause firepower conflicts, which seriously endangers the ship safety. Meanwhile, with directed-energy weapons mounted on ships, firepower conflicts between weapons become a “high probability event”. Aiming at the problem of firepower safety control, based on the research about the collision probability model of air crafts and space targets and according to the cone of fire model of conventional weapons and directed-energy weapons, this paper solved the firepower conflict probabilities between conventional weapons as well as between conventional weapons and directed-energy weapons respectively using the methods of probability theory, and established the firepower safety control model. Then the calculation of firepower conflict probability was carried out using the dimensionality reduction method based on the equivalent conversion of polar coordinates and the power series method based on Laplace transform. The simulation results revealed that the proposed model and calculation methods are effective and reliable, which can provide theoretical basis and technical support for resolution of firepower conflicts between weapons.     

Adaptive sliding mode control of modular self-reconfigurable spacecraft with time-delay estimation

The reconstruction control of modular self-reconfigurable spacecraft (MSRS) is addressed using an adaptive sliding mode control (ASMC) scheme based on time-delay estimation (TDE) technology. In contrast to the ground, the base of the MSRS is floating when assembled in orbit, resulting in a strong dynamic coupling effect. A TED-based ASMC technique with exponential reaching law is designed to achieve high-precision coordinated control between the spacecraft base and the robotic arm. TDE technology is used by the controller to compensate for coupling terms and uncertainties, while ASMC can augment and improve TDE’s robustness. To suppress TDE errors and eliminate chattering, a new adaptive law is created to modify gain parameters online, ensuring quick dynamic response and high tracking accuracy. The Lyapunov approach shows that the tracking errors are uniformly ultimately bounded (UUB). Finally, the on-orbit assembly process of MSRS is simulated to validate the efficacy of the proposed control scheme. The simulation results show that the proposed control method can accurately complete the target module’s on-orbit assembly, with minimal perturbations to the spacecraft’s attitude. Meanwhile, it has a high level of robustness and can effectively eliminate chattering.     

基于GA的模糊PID控制在质量矩导弹系统上的应用

针对三轴稳定的质量矩导弹姿态控制系统,提出了一种基于遗传算法进行参数寻优的模糊PID控制方法。在建立姿控系统数学模型的基础上,首先设计了姿态控制的优先级函数,然后根据实际的姿态控制系统,设计了遗传算法的性能指标函数和具体的优化策略,最后给出了模糊PID控制器的设计思路。仿真结果说明了该方法的有效性。     

摆动喷管控制精度相关问题讨论

对不同性质的喷管特点以及在控制力作用下喷管的响应特性进行了初步分析;以某防空导弹为例,阐述了摆动喷管在非理想状态下摆动时作动器牵连运动、正负摆角不对称、力臂变化、摆心漂移、位移传递系数精度和预调角对摆角控制的影响;同时说明了负载力矩和伺服机构相关参数影响着摆动喷管位置控制精度。     

近程简易控制火箭末修的效率分析

阐述了脉冲控制力实施简易控制的特点,针对某近程单兵火箭建立了其弹道模型,在弹体周向布置两种大小不同的脉冲发动机,采用两种脉冲延时分级控制的控制策略对其实施简易控制,对其控制时刻、转速影响、分档设计等进行了分析证明对该单兵火箭实施简易控制是可行的.