光电载荷安装误差标校的飞行航路

无人机搭载光电载荷进行安装误差标校时,飞行航路的选择与规划在很大程度上影响着标校算法的收敛性与误差识别结果。为增强标校飞行架次的有效性,提高安装误差可被识别的程度,改善标校算法的收敛性及标校精度,对标校的原理和标校算法进行了理论分析,并利用考察差异函数偏微分的方法找到了标校航路和安装误差标校之间的相互联系,然后结合标校实施过程中所遇到的实际问题提出标校航路规划应遵循的原则,给出了标校航路规划的参考范例。     

电磁脉冲对屏蔽双绞线耦合效应实验研究

从脉冲信号对屏蔽双绞线的容性耦合和感性耦合两个方面进行分析,采用实验脉冲信号发生器作为干扰源对基于非屏蔽双绞线和不同接地方式屏蔽双绞线的CAN总线通信系统进行实验．实验结果表明：非屏蔽双绞线和屏蔽层不接地屏蔽双绞线电磁脉冲耦合效果基本相同,屏蔽层双端接地可以抗脉冲信号的容性耦合和感性耦合．     

卧式储油罐罐体变位模型与罐容表标定

针对储油罐罐体变位影响油品计量精度的问题,建立了球冠形封头卧式储油罐罐体变位模型,将罐体变位后的油位高度转换成无变位时的油位高度,再利用罐体无变位时的储油体积计算模型得到变位后储油体积与油位高度的关系。分析了罐体变位对罐容表的影响,提出了一种基于最小二乘原理的变位参数识别算法,最后对该变位模型进行了检验,并采用插值算法重新标定了变位后的罐容表。结果表明:该变位模型与实际情况基本相符,变位参数识别算法能估计出罐体倾斜角度和偏转角度。     

Peridynamic modeling and simulation of thermo-mechanical de-icing process with modified ice failure criterion

De-icing technology has become an increasingly important subject in numerous applications in recent years. However, the direct numerical modeling and simulation the physical process of thermo-mechanical deicing is limited. This work is focusing on developing a numerical model and tool to direct simulate the de-icing process in the framework of the coupled thermo-mechanical peridynamics theory. Here, we adopted the fully coupled thermo-mechanical bond-based peridynamics (TM-BB-PD) method for modeling and simulation of de-icing. Within the framework of TM-BB-PD, the ice consti-tutive model is established by considering the influence of the temperature difference between two material points, and a modified failure criteria is proposed, which takes into account temperature effect to predict the damage of quasi-brittle ice material. Moreover, thermal boundary condition is used to simulate the thermal load in the de-icing process. By comparing with the experimental results and the previous reportedfinite element modeling, our numerical model shows good agreement with the pre-vious predictions. Based on the numerical results, we find that the developed method can not only predict crack initiation and propagation in the ice, but also predict the temperature distribution and heat conduction during the de-icing process. Furthermore, the influence of the temperature for the ice crack growth pattern is discussed accordingly. In conclusion, the coupled thermal-mechanical peridynamics formulation with modified failure criterion is capable of providing a modeling tool for engineering ap-plications of de-icing technology.     

通气空泡与超音速尾喷流耦合作用实验研究

基于开放式水洞,构建了通气空泡与超音速尾喷流耦合作用实验系统。设计了四种可变长度实验模型,重点研究射流与通气空泡相对位置对空泡射流耦合作用机理的影响。针对不同外形实验模型,改变通气流量和射流流量,获得了不同工况下空泡界面瞬态演化规律。通过实验,观察到射流完全补气、射流部分泄气、射流完全泄气三种不同耦合作用模式。进一步结合实验数据和Paryshev理论分析,建立了不同模式下临界转变条件和空泡尺度计算模型。当≤0.1 时,空泡长度可用经典空泡经验公式来描述;当0.1<<1.5 时,空泡长度分为模型长度和尾部空泡长度两部分,而尾部空泡长度只与无量纲动量比有关;当 ≥1.5时,空泡闭合在喷管出口,空泡长度与模型长度相等。     

高超声速气流中头锥逆喷防热流热耦合分析

作为一种主动冷却方式,逆向喷流结构对高超声速飞行器的热防护具有显著效果.为了对头锥逆喷的防热特性进行准确预测,采用流热耦合方法,对6马赫下的头锥逆喷结构的流动和传热进行数值研究.通过数值计算和实验对比,验证了湍流模型和流热耦合算法的准确性,获得了不同逆喷总压比下的流动特性,并且对不同逆喷总压比对流动和传热的影响进行了分...