遥感数据处理任务调度的Petri网模型及求解算法

为了对多源遥感数据的处理任务进行有效的调度和管理,提高处理资源的利用率,根据遥感数据处理任务调度问题的特点,采用Petri网对该问题进行形式化描述,建立了遥感数据处理任务调度的数学模型,根据该问题的多目标特性,采用蚁群算法进行求解.给出仿真实例,将蚁群算法的求解结果与启发式算法和模拟退火算法的求解结果进行比较,验证算法...     

Multi‐period maintenance scheduling of tree networks with minimum flow disruption

We introduce a multi‐period tree network maintenance scheduling model and investigate the effect of maintenance capacity restrictions on traffic/information flow interruptions. Network maintenance refers to activities that are performed to keep a network operational. For linear networks with uniform flow between every pair of nodes, we devise a polynomial‐time combinatorial algorithm that minimizes flow disruption. The spiral structure of the optimal maintenance schedule sheds insights into general network maintenance scheduling. The maintenance problem on linear networks with a general flow structure is strongly NP‐hard. We formulate this problem as a linear integer program, derive strong valid inequalities, and conduct a polyhedral study of the formulation. Polyhedral analysis shows that the relaxation of our linear network formulation is tight when capacities and flows are uniform. The linear network formulation is then extended to an integer program for solving the tree network maintenance scheduling problem. Preliminary computations indicate that the strengthened formulations can solve reasonably sized problems on tree networks and that the intuitions gained from the uniform flow case continue to hold in general settings. Finally, we extend the approach to directed networks and to maintenance of network nodes. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

Cyclic scheduling in robotic flowshops with bounded work‐in‐process levels

This study addresses cyclic scheduling in robotic flowshops with bounded work‐in‐process (WIP) levels. The objective is to minimize the cycle time or, equivalently, to maximize the throughput, under the condition that the WIP level is bounded from above by a given integer number. We present several strongly polynomial algorithms for the 2‐cyclic robotic flowshop scheduling problems for various WIP levels. © 2010 Wiley Periodicals, Inc. Naval Research Logistics 58: 1–16, 2011     

科学工作流技术研究综述

科学工作流管理系统(Scientific Workflow Management Systems,SWfMS)为科学家提供一个管理大规模复杂科学计算的有效平台,通过管理复杂应用程序对海量科学数据进行管理、分析、仿真和可视化以帮助科学家进行科学发现.本文首先对科学工作流(Scientific Workflow,SWF)...     

基于逆向分层的工作流时间-费用优化方法

针对效用网格下基于优先级因子的工作流时间-费用优化问题,基于工作流的同步完成特征对任务进行分层并提出三种实时调度算法:基于逆向分层的sufferage(BLSuff)、基于逆向分层的min-min(BLMin)及基于逆向分层的min-max(BLMax)。算法设计基于优先级因子的衡量标准对时间与费用同时进行优化,并为任务设置期望完成时间以达到充分利用费用优化空间进行费用优化的目标。实验结果表明这三种算法在各种优先级因子下都能对工作流的执行时间与执行费用进行较好的优化。     

Cyclic preference scheduling for nurses using branch and price

This paper presents a new methodology to solve the cyclic preference scheduling problem for hourly workers. The focus is on nurse rostering but is applicable to any organization in which the midterm scheduling decision must take into account a complex of legal, institutional, and preferential constraints. The objective is to strike a balance between satisfying individual preferences and minimizing personnel costs. The common practice is to consider each planning period independently and to generate new rosters at the beginning of each. To reduce some of the instability in the process, there is a growing trend toward cyclic schedules, which are easier to manage and are generally perceived to be more equitable. To address this problem, a new integer programming model is presented that combines the elements of both cyclic and preference scheduling. To find solutions, a branch‐and‐price algorithm is developed that makes use of several branching rules and an extremely effective rounding heuristic. A unique feature of the formulation is that the master problem contains integer rather than binary variables. Computational results are reported for problem instances with up to 200 nurses. Most were solved within 10 minutes and many within 3 minutes when a double aggregation approach was applicable. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2007.     

Parallel machine scheduling with job assignment restrictions

In the classical multiprocessor scheduling problem independent jobs must be assigned to parallel, identical machines with the objective of minimizing the makespan. This article explores the effect of assignment restrictions on the jobs for multiprocessor scheduling problems. This means that each job can only be processed on a specific subset of the machines. Particular attention is given to the case of processing times restricted to one of two values, 1 and λ, differing by at most 2. A matching based polynomial time ε‐approximation algorithm is developed that has a performance ratio tending to . This algorithm is shown to have the best possible performance, tending to 3/2, for processing times 1 and 2. For the special case of nested processing sets, i.e., when the sets of machines upon which individual jobs may be assigned are non‐overlapping, the behavior of list scheduling algorithms is explored. Finally, for assignment restrictions determined by just one characteristic of the machines, such as disc storage or memory constraint in the case of high performance computing, we contribute an algorithm that provides a 3/2 worst case bound and runs in time linear in the number of jobs. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

The impact of component commonality on composite assembly policies

Assemble in Advance (AIA) policy reduces assembly cost due to advance planning, while Assemble to Order (ATO) policy eliminates assembly of excessive (more than demanded) units. The tradeoffs between the two policies have been studied in the past for single product environments. Moreover, it was shown that it is beneficial to employ AIA and ATO simultaneously. In this article, we study the employment of such a composite assembly policy in a multiproduct environment with component commonality. When common components are used, ATO may also enable us to benefit from the risk pooling effect. We provide important managerial insights such as: the multiperiod problem is myopic and changes in inventory levels due to the use of common components, and demonstrate the potential profit increase compared to other policies.© 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

Optimal burn‐in procedure for periodically inspected systems

Burn‐in is a widely used method to improve the quality of products or systems after they have been produced. In this paper, we study burn‐in procedure for a system that is maintained under periodic inspection and perfect repair policy. Assuming that the underlying lifetime distribution of a system has an initially decreasing and/or eventually increasing failure rate function, we derive upper and lower bounds for the optimal burn‐in time, which maximizes the system availability. Furthermore, adopting an age replacement policy, we derive upper and lower bounds for the optimal age parameter of the replacement policy for each fixed burn‐in time and a uniform upper bound for the optimal burn‐in time given the age replacement policy. These results can be used to reduce the numerical work for determining both optimal burn‐in time and optimal replacement policy. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

Modeling and analysis of a mixed‐model assembly line with stochastic operation times

We consider a mixed‐model assembly line (MMAL) comprised a set of workstations and a conveyor. The workstations are arranged in a serial configuration. The conveyor moves at a constant speed along the workstations. Initial units belonging to different models are successively fed onto the conveyor, and they are moved by the conveyor to pass through the workstations to gradually generate final products. All assembling tasks are manually performed with operation times to be stochastic. An important performance measure of MMALs is overload times that refer to uncompleted operations for operators within their work zones. This paper establishes a method to analyze the expected overload times for MMALs with stochastic operation times. The operation processes of operators form discrete time nonhomogeneous Markov processes with continuous state spaces. For a given daily production schedule, the expected overload times involve in analyzing the Markov processes for finite horizon. Based on some important properties of the performance measure, we propose an efficient approach for calculating the expected overload times. Numerical computations show that the results are very satisfactory. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007