维度汇总性问题及其对策

在联机分析处理中,为了提高查询的响应速度,预聚合是一种常用的方法,但在已有的研究中,关于维度汇总性的研究还相当少。从维度汇总性的基本概念及其分类出发,对维度汇总性的判断方法进行了研究,最后还给出了处理维度汇总性问题时的一些对策。     

逐步Ⅰ型混合截尾试验下Burr部件的可靠性分析

在逐步Ⅰ型混合截尾试验下,研究了Burr部件寿命参数及可靠性指标的极大似然估计和Bayes估计.利用简单迭代方法,给出了寿命参数和可靠性指标的极大似然估计的数值解.然后利用Lindely Bayes近似算法得到了平方损失下寿命参数以及可靠性指标的Bayes估计.最后,运用Monte-Carlo方法对各估计结果作了模拟比较,结果表明Bayes估计较极大似然估计的误差小.     

非致命防暴动能弹作战效能评估

提出了非致命防暴动能弹作战效能的评估法,分析了非致命防暴动能弹的技术性能,建立了以非致命性为核心指标的防暴动能弹效能指标体系。采用定性分析与定量分析相结合,将集对分析法应用到了非致命防暴动能弹的效能评估中,对3种防暴动能弹进行了效能评估。为非致命防暴动能弹的研发生产提供了重要的理论支撑。     

系统仿真技术初探

为了对系统仿真技术有一个总体认识,采用归纳和分析的方法,对系统仿真技术的体系进行了初步探讨.     

制氢过程中一氧化碳氧化反应速率控制的平滑切换方法

铂族金属催化剂CO氧化过程呈现较为复杂的本质非线性属性,如反应速率突变、双稳定性和迟滞,这些本质非线性属性取决于化学反应内在的稳定性和自组织机制,所产生的一个外在结果是CO氧化反应速率与控制参数之间呈现出路径依赖的输入输出关系。对这类系统采用传统的线性控制方法具有固有的不稳定机制,可以导致化学反应速率的震荡以及控制系统的失稳;而采用常规非线性切换控制则面临在切换初始时刻所具有的大干扰问题,较大地影响控制系统的动态性能甚至稳定性。针对研究所面临的这种大干扰问题,提出基于积分初值重置的平滑切换控制方法予以解决。结果表明,所提出的方法能够从原理上解决CO氧化反应控制过程的平滑切换问题,较好地提高控制系统的动态性能。     

Decomposition-based approximation algorithms for the one-warehouse multi-retailer problem with concave batch order costs

We study the one-warehouse multi-retailer problem under deterministic dynamic demand and concave batch order costs, where order batches have an identical capacity and the order cost function for each facility is concave within the batch. Under appropriate assumptions on holding cost structure, we obtain lower bounds via a decomposition that splits the two-echelon problem into single-facility subproblems, then propose approximation algorithms by judiciously recombining the subproblem solutions. For piecewise linear concave batch order costs with a constant number of slopes we obtain a constant-factor approximation, while for general concave batch costs we propose an approximation within a logarithmic factor of optimality. We also extend some results to subadditive order and/or holding costs.     

多管火箭武器储运发射箱长期储存蠕变性能预测

为探究火箭武器储运发射箱长期储存的蠕变性能,制备复合材料层压板并开展单轴拉伸蠕变试验,获得了单向纤维复合材料主方向的蠕变本构模型参数。采用有限元方法并借助用户自定义材料子程序建立储运发射箱长期储存蠕变的数值分析模型,预测了堆码储存15年后底层发射箱的蠕变变形。以储存后的发射箱作为初始状态建立弹管耦合发射动力学仿真计算模型,进一步分析蠕变对火箭弹发射过程的影响。仿真结果表明:蠕变引起的定向器平行度和发射箱底面平面度的变化均小于技术指标规定值,定向器束的最大残余变形在三维空间内呈马鞍状分布,上、下两行中间位置定向器的变形最大,左、右两列中间位置定向器的变形最小。定向器蠕变变形使得弹管间隙减小,火箭弹在管内运动使弹管之间的动态接触碰撞力增大,离轨速度降低。     

Characteristics structure analysis on debris cloud in the hypervelocity impact of disk projectile on thin plate

In this paper, the gauge points setting is introduced in the SPH simulation to analyze the debris cloud structure generated by the hypervelocity impact of disk projectile on thin plate. Compared with the experiments, more detailed information of the debris cloud structure can be classified from the numerical simulation. However, due to the solitary dispersion and overlap display of the particles in the SPH simulation, accurate comparison between numerical and experimental results is difficult to be performed. To track the velocity and spatial distribution of the particles in the debris cloud induced from disk and plate, gauge points are locally set in the single-layer profile in the SPH model. By analyzing the gauge points’ spatial coordinate and velocity, the location and velocity of characteristic points in the debris cloud are determined. The boundary of debris cloud is achieved, as well as the fragments distribution outside the main structure of debris cloud.     

Physical and damping properties of kenaf fibre filled natural rubber/thermoplastic polyurethane composites

The paper presents the investigation of the effect of alkaline treatment of sodium hydroxide (NaOH) on physical and dynamic mechanical analysis (DMA) viscoelastic properties of kenaf fibre filled natural rubber (NR)/thermoplastic polyurethane (TPU) composites. The treated kenaf fiber, NR and TPU were weighed and proportioned according to the required compositions and were blended using hot mixed Brabender machine. The polymer composites were then fabricated using the hot press to form a sample board. The sample was cut and prepared and water absorption, density, thickness swelling and DMA tests were performed. As far as physical properties are concerned, composites with the highest NR amount of shows the best results, which indicates good fiber bonding adhesion. The polymer composites with the highest amount of TPU shows the highest damping properties at high temperature.     

耦合封闭声腔的主导声辐射模态确定方法

将在某一频率下或某一频段内对封闭声腔声势能起主要作用的一阶或几阶声辐射模态定义为耦合封闭声腔的主导声辐射模态。准确认定主导声辐射模态至关重要,直接影响有源控制效果。然而,现有的主导声辐射模态确定方法,要么仅考虑辐射效率的作用而忽视模态幅度的影响,要么就需要用到结构模态信息,难以实现工程应用。基于此,综合运用计算和测试手段,全面考虑辐射效率和模态幅度两个因素,提出了一种基于“初选—预留—后验”的主导声辐射模态确定方法,并通过实验研究证明了该方法的有效性和可行性。结果表明：提出的确定方法能够准确认定主导声辐射模态,确定过程中不需要用到辐射体的结构模态信息,可用于指导控制目标选取或重构封闭声腔声势能。