现代鱼雷流体动力布局及控制策略

研究了现代鱼雷流体动力布局及相应的控制问题 ,讨论了非线性鳍舵设计的可行性 ,给出了基于流形上控制的非线性控制策略     

电液伺服系统的仿真与自校正PID控制器的设计

对一个试验用电液伺服系统进行了理论建模和仿真研究 ,引入了一个非线性状态方程模型来描述电液伺服系统的动态特性 .通过仿真结果与实际系统的响应相比较 ,验证了所建立的理论模型的准确性 .在此仿真模型基础上 ,设计了一个适用的自校正PID控制器 ,并且对其控制特性进行了仿真研究     

面阵CCD非线性响应的测量

针对CCD测量技术中出现的非线性问题 ,提出了以光电池为标定基准的CCD非线性测试以及非线性标定方法。通过实际测试的实验数据 ,详细说明了如何利用测得的数据进行CCD非线性标定。该方法简单易行、有较高的精度和一定的科研参考价值。     

Testing of software with an operational profile

One of the important features of any software system is its operational profile. This is simply the set of all operations that a software is designed to perform and the occurence probabilities of these operations. We present a new model on optimal software testing such that testing is done sequentially using a set of test cases. There may be failures due to the operations in each of these cases. The model parameters, consisting of testing costs and failure rates, all depend on the cases used and the operations performed. Our aim is to find the optimal testing durations in all of the cases in order to minimize the total expected cost. This problem leads to interesting decision models involving nonlinear programming formulations that possess explicit analytical solutions under reasonable assumptions. © 2000 John Wiley & Sons, Inc., Naval Research Logistics 47: 620–634, 2000     

Testing or fault-finding for reliability growth: A missile destructive-test example

A new piece of equipment has been purchased in a lot of size m. Some of the items can be used in destructive testing before the item is put into use. Testing uncovers faults which can be removed from the remaining pieces of equipment in the lot. If t < m pieces of equipment are tested, then those that remain, m₁ = m − t, have reduced fault incidence and are more reliable than initially, but m₁ may be too small to be useful, or than is desirable. In this paper models are studied to address this question: given the lot size m, how to optimize by choice of t the effectiveness of the pieces of equipment remaining after the test. The models used are simplistic and illustrative; they can be straightforwardly improved. © 1997 John Wiley & Sons, Inc. Naval Research Logistics 44: 623–637, 1997     

产品网络化协同开发系统信息处理模型研究

产品网络协同开发系统信息处理模型是现代制造企业从事产品开发、提高企业核心竞争力的关键。在分析产品网络化协同开发系统现状的基础上,阐明了产品网络化协同开发系统的基本内涵及实现方法。提出了基于输入、输出、知识、关系、方法和时间约束六个方面组成的产品网络化协同开发系统的信息处理统一模型;建立了一个面向产品开发全过程协同的信息流模型,构建了产品网络化协同开发平台信息流模型的软件结构,为制造企业建立产品网络协同开发平台,实现产品开发过程的信息化、科学化和规范化进行了有益的工作。     

飞行器动力学环境预示技术应用研究

动力学环境试验技术已被广泛应用 ,但动力学环境预示技术还没有得到很好的重视和发展。讨论了几种动力学环境预示方法的特点 ,着重研究了统计能量分析 ( SEA)方法的原理及其应用 ,并以某型号发动机长尾喷管舱为例 ,具体给出其工程分析估计过程     

一种基于神经网络的磁性目标定位方法

磁性目标定位问题可归结为一类非线性规划问题的求解 .该问题的最大特点就是其目标函数的计算过程极为繁琐 .而目标函数计算的快慢对磁定位的实时性有很大影响 .在详细研究了目标函数之后 ,给出了目标函数的一种神经网络结构实现 .由于该网络结构易于并行计算和VLSI实现 ,从而可使磁定位的实时性得到改善 .     

The impact of exponential smoothing forecasts on the bullwhip effect

An important phenomenon often observed in supply chain management, known as the bullwhip effect, implies that demand variability increases as one moves up the supply chain, i.e., as one moves away from customer demand. In this paper we quantify this effect for simple, two‐stage, supply chains consisting of a single retailer and a single manufacturer. We demonstrate that the use of an exponential smoothing forecast by the retailer can cause the bullwhip effect and contrast these results with the increase in variability due to the use of a moving average forecast. We consider two types of demand processes, a correlated demand process and a demand process with a linear trend. We then discuss several important managerial insights that can be drawn from this research. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 269–286, 2000     

采用随机几何工具的终端直通通信接入控制方法

针对现有具备终端直通（Device-to-Device, D2D）功能的蜂窝网络的干扰管理问题,提出一种新型的采用随机几何工具的D2D通信接入控制方法。利用随机过程理论以及随机几何工具建立模型分析邻近基站和D2D通信对蜂窝通信的影响,并推导蜂窝业务接入失败概率表达式。基于该表达式能够计算网络允许的最大D2D用户密度,辅助D2D通信接入控制实现干扰管理。仿真证明基于所提数值计算方法获得的估计结果与蒙特卡洛仿真结果相符,且通过合理限制D2D用户密度和D2D用户发射功率可满足指定的蜂窝业务接入失败概率要求。