正畸力作用下微种植体支抗的应力分析

通过建立直径为1.4,1.6,1.8 mm,长度为6,8,10 mm,螺纹深度为0.2 mm,螺纹间距0.5 mm的Ti质微种植体支抗与颌骨有限元模型,研究在常用载荷1.96 N正畸力与微种植体长轴呈45°,60°和75°三种角度时的Ti质微种植体应力分布和大小。分析得出,应力主要集中在微种植体颈部1 mm内,在其颈部1.2 mm的范围内应力值的衰减都很明显,在颈部1.2 mm的范围内曲线较陡。在设定的加载条件下,不同直径的微种植体应力值呈规则的变化趋势,直径1.8 mm,45°时微种植体的各应力值极值最小。微种植体长度对应力的影响不大,位移变化均较小。     

基于影响图方法的信息战模型

由于粒子滤波的算法原理,其计算量很大。研究了针对机动目标的交互式多模型粒子滤波器(IMMPF)算法和多速率交互式多模型(MRIMM)算法,提出了多速率交互式多模型粒子滤波器(MRIMMPF)算法。该算法是在交互式多模型粒子滤波器(IMMPF)的基础上引入多速率技术,期望在保持IMMPF的性能同时能够减少因为粒子滤波带来的计算量;最后通过和一般基于EKF的IMM算法、IMMPF算法的比较,验证了该算法的有效性。     

基于灰色理论的防御要点优选模型及应用

运用多目标决策分析原理,依据选择防御要点的基本要求,从"地位重要、地形有利、地幅适当"的角度分析了防御要点的影响因素集,运用灰色理论建立了防御要点灰色关联优选模型,达到了对防御要点进行排序和优选的目的,为指挥员实施防御作战的科学决策提供辅助依据。     

A model for step‐stress accelerated life testing

Modern technology is producing high reliability products. Life testing for such products under normal use condition takes a lot of time to obtain a reasonable number of failures. In this situation a step‐stress procedure is preferred for accelerated life testing. In this paper we assume a Weibull and Lognormal model whose scale parameter depends upon the present level as well as the age at the entry in the present stress level. On the basis of that we propose a parametric model to the life distribution for step‐stress testing and suggest a suitable design to estimate the parameters involved in the model. A simulation study has been done by the proposed model based on maximum likelihood estimation. © 2003 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

Determination of burn‐in parameters and residual life for highly reliable products

Today, many products are designed and manufactured to function for a long period of time before they fail. Determining product reliability is a great challenge to manufacturers of highly reliable products with only a relatively short period of time available for internal life testing. In particular, it may be difficult to determine optimal burn‐in parameters and characterize the residual life distribution. A promising alternative is to use data on a quality characteristic (QC) whose degradation over time can be related to product failure. Typically, product failure corresponds to the first passage time of the degradation path beyond a critical value. If degradation paths can be modeled properly, one can predict failure time and determine the life distribution without actually observing failures. In this paper, we first use a Wiener process to describe the continuous degradation path of the quality characteristic of the product. A Wiener process allows nonconstant variance and nonzero correlation among data collected at different time points. We propose a decision rule for classifying a unit as normal or weak, and give an economic model for determining the optimal termination time and other parameters of a burn‐in test. Next, we propose a method for assessing the product's lifetime distribution of the passed units. The proposed methodologies are all based only on the product's initial observed degradation data. Finally, an example of an electronic product, namely contact image scanner (CIS), is used to illustrate the proposed procedure. © 2002 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

A general model of heterogeneous system lifetimes and conditions for system burn‐in

Burn‐in is a technique to enhance reliability by eliminating weak items from a population of items having heterogeneous lifetimes. System burn‐in can improve system reliability, but the conditions for system burn‐in to be performed after component burn‐in remain a little understood mathematical challenge. To derive such conditions, we first introduce a general model of heterogeneous system lifetimes, in which the component burn‐in information and assembly problems are related to the prediction of system burn‐in. Many existing system burn‐in models become special cases and two important results are identified. First, heterogeneous system lifetimes can be understood naturally as a consequence of heterogeneous component lifetimes and heterogeneous assembly quality. Second, system burn‐in is effective if assembly quality variation in the components and connections which are arranged in series is greater than a threshold, where the threshold depends on the system structure and component failure rates. © 2003 Wiley Periodicals, Inc. Naval Research Logistics 50: 364–380, 2003.     

微分对策界栅理论在舰艇作战能力评估中的应用

作战能力是表征战斗舰艇战术技术性能的一项重要指标,如何正确评价舰艇的作战能力一直是军事运筹研究的热点.利用定性微分对策的界栅理论研究了一类作战问题,通过构造捕获区面积和咽喉区域面积,并以此作为动态评估舰艇作战能力的衡量指标.研究结果可为综合评价舰艇作战能力提供一条新途径.     

反舰导弹纯方位发射捕捉概率计算方法

反舰导弹的纯方位发射对目标信息要求不高,在目标信息的探测越来越艰难的今天,是反舰导弹较为重要的一种发射方式,也将会成为未来海战场上常用的作战方式.介绍了反舰导弹捕捉概率的计算方法和传统纯方位发射的捕捉概率的计算方法,并从分析反舰导弹捕捉概率的计算模型和影响因素出发,指出传统的反舰导弹纯方位发射的捕捉概率计算模型存在不足,并给出了修正后的计算模型.     

一种无人战斗机系统使用保障费用分析方法

基于无人战斗机系统在使用保障上的特点,通过对有人战斗机使用保障费用模型进行合理改造,使其能适用于无人战斗机的使用保障费用分析。经过改造的模型具有结构清晰、概念明确的特点。适合在飞机总体设计阶段用于全寿命周期的费用估算以及飞机的费效分析和综合优化设计。通过与有人战斗机的使用保障费用进行对比计算表明,无人战斗机系统的使用保障费用具有明显的经济优势。     

混沌理论在雷达中的应用

混沌动力学作为一门新学科已经引起了世界各国科学界的重视,是近年来非线性科学领域的热门学科,混沌系统初值的敏感性和两个混沌系统间同步的实现,使得混沌用于保密通信成为可能,海杂波的混沌特性使人们开始探索混沌在雷达中的应用.研究表明,混沌在杂波分析与建模、信号检测、目标识别及伪随机码波形设计等领域内取得了可喜的成果.研究了混沌在雷达中的应用,分析了目前混沌在雷达中的应用现状,预测了未来研究发展的趋势.