Storage life prediction under pre-strained thermally-accelerated aging of HTPB coating using the change of crosslinking density

In order to predict the storage life of a certain type of HTPB (hydroyl-terminated polybutadiene) coating at 25 C and analyze the influence of pre-strain on the storage life, the accelerated aging tests of HTPB coating at 40 C, 50 C, 60 C, 70 C with the pre-strain of 0%, 3%, 6%, 9%, respectively were carried out. The variation regularity of the change of crosslinking density was analyzed and the aging model of HTPB coating under pre-strained thermally-accelerated aging was proposed. The storage life of HTPB coating at 25 C was estimated by using the Berthelot equation as the end point of the aging life with a 30% decrease in maximum elongation. The results showed that the change of crosslinking density of HTPB coating increased with the increase of aging temperature and aging time, and decreased with the in-crease of pre-strain. Under 0% pre-strain, the relationship between the change of crosslinking density of HTPB coating and the aging time can be described by the logarithmic model with the confidence probability greater than 99%.The stress relaxation phenomenon existed under 3%, 6% and 9% pre-strained aging. The aging model considering chemical aging and pre-strain was established with the confidence probability greater than 90%. The storage life of HTPB coating was 15.2935 years at 25 C under 0% pre-strain, which was reduced by 13.9007%, 75.6949% and 89.7859% under 3%, 6% and 9% pre-strain, respectively. The existence of pre-strain has a serious impact on the storage life of HTPB coating, therefore, the pre-strain should be avoided as much as possible during the actual storage.     

Mechanical properties and thermal conductivity of pristine andfunctionalized carbon nanotube reinforced metallic glass composites:A molecular dynamics approach

This work uses the molecular dynamics approach to study the effects of functionalization of carbon nanotubes (CNTs) on the mechanical properties of Cu64Zr36 metallic glass (MG). Three types of functional groups, carboxylic, vinyl and ester were used. The effect of CNT volume fraction (Vf) and the number of functional groups attached to CNT, on the mechanical properties and thermal conductivity of CNT-MG composites was analysed using Biovia Materials Studio. At lower values of Vf (from 0 to 5％), the per-centage increase in Young's modulus was approximately 66％. As the value of Vf was increased further (from 5 to 12％), the rate of increase in Young's modulus was reduced to 16％. The thermal conductivity was found to increase from 1.52 W/mK at Vf=0％to 5.88 W/mK at Vf=12％, thus giving an increase of approximately 286％. Functionalization of SWCNT reduced the thermal conductivity of the SWCNT-MG composites.     

Numerical simulation study on penetration performance of depleted Uranium (DU) alloy fragments

Due to its high strength, high density, high hardness and good penetration capabilities, Depleted ura-nium alloys have already shined in armor-piercing projectiles. There should also be a lot of room for improvement in the application of fragment killing elements. Therefore, regarding the performance of the depleted uranium alloy to penetrate the target plate, further investigation is needed to analyze its advantages and disadvantages compared to tungsten alloy. To study the difference in penetration per-formance between depleted uranium alloy and tungsten alloy fragments,firstly, a theoretical analysis of the adiabatic shear sensitivity of DU and tungsten alloys was given from the perspective of material constitutive model. Then, taking the cylindrical fragment penetration target as the research object, the penetration process and velocity characteristics of the steel target plates penetrated by DU alloy frag-ment and tungsten alloy fragment were compared and analyzed, by using finite element software ANSYS/LS-DYNA and Lagrange algorithm. Lastly, the influence of different postures when impacting target and different fragment shapes on the penetration results is carried out in the research. The results show that in the penetration process of the DU and tungsten alloy fragments, the self-sharpening properties of the DU alloy can make the fragment head sharper and the penetrating ability enhance. Under the same conditions, the penetration capability of cylindrical fragment impacting target in vertical posture is better than that in horizontal posture, and the penetration capability of the spherical fragment is slightly better than that of cylindrical fragment.     

A novel formulation of material nonlinear analysis in structural mechanics

This article demonstrates a novel approach for material nonlinear analysis. This analysis procedure eliminates tedious and lengthy step by step incremental and then iterative procedure adopted classically and gives direct results in the linear as well as in nonlinear range of the material behavior. Use of elastic moduli is eliminated. Instead, stress and strain functions are used as the material input in the analysis procedure. These stress and strain functions are directly derived from the stress-strain behavior of the material by the method of curve fitting. This way, the whole stress-strain diagram is utilized in the analysis which naturally exposes the response of structure when loading is in nonlinear range of the material behavior. It is found that it is an excellent computational procedure adopted so far for material nonlinear analysis which gives very accurate results, easy to adopt and simple in calculations. The method eliminates all types of linearity assumptions in basic derivations of equations and hence, eliminates all types of possibility of errors in the analysis procedure as well. As it is required to know stress distribution in the structural body by proper modelling and structural idealization, the proposed analysis approach can be regarded as stress-based analysis procedure. Basic problems such as uniaxial problem, beam bending, and torsion problems are solved. It is found that approach is very suitable for solving the problems of fracture mechanics. Energy release rate for plate with center crack and double cantilever beam specimen is also evaluated. The approach solves the fracture problem with relative ease in strength of material style calculations. For all problems, results are compared with the classical displacement-based liner theory.     

Prediction of three-dimensional elastic behavior of filament-wound composites based on the bridging model

This work provides a method to predict the three-dimensional equivalent elastic properties of the filament-wound composites based on the multi-scale homogenization principle.In the meso-scale,a representative volume element(RVE)is defined and the bridging model is adopted to establish a theoretical predictive model for its three-dimensional equivalent elastic constants.The results obtained through this method for the previous experimental model are compared with the ones gained respec-tively by experiments and classical laminate theory to verify the reliability of this model.In addition,the effects of some winding parameters,such as winding angle,on the equivalent elastic behavior of the filament-wound composites are analyzed.The rules gained can provide a theoretical reference for the optimum design of filament-wound composites.     

ARCS动机模型在初中英语语法教学中的应用

语法学习能在一定程度上保证语言的地道性、流畅性和实用性。但就目前来看,英语学习者学习语法的积极性普遍不高,不少英语学习者抱怨英语语法项目琐碎繁杂、语法学习枯燥无聊。针对此现状,本文尝试将ARCS模型的四类动机策略整合于初中英语语法教学,以期有效激发并维持学习者的语法学习热情,提高语法教学效果。     

An interface shear damage model of chromium coating/steel substrate under thermal erosion load

The Cr-plated coating inside a gun barrel can effectively improve the barrel's erosion resistance and thus increase the service life.However,due to the cyclic thermal load caused by high-temperature gun-powder,micro-element damage tends to occur within the Cr coating/steel substrate interface,leading to a gradual deterioration in macro-mechanical properties for the material in the related region.In order to mimic this cyclic thermal load and,thereby,study the thermal erosion behavior of the Cr coating on the barrel's inner wall,a laser emitter is utilized in the current study.With the help of in-situ tensile test and finite element simulation results,a shear stress distribution law of the Cr coating/steel substrate and a change law of the interface ultimate shear strength are identified.Studies have shown that the Cr coating/steel substrate interface's ultimate shear strength has a significant weakening effect due to increasing temperature.In this study,the interfacial ultimate shear strength decreases from 2.57 GPa(no erosion)to 1.02 GPa(laser power is 160 W).The data from this experiment is employed to establish a Cr coating/steel substrate interface shear damage model.And this model is used to predict the flaking process of Cr coating by finite element method.The simulation results show that the increase of coating crack spacing and coating thickness will increase the service life of gun barrel.     

Visual SLAM in dynamic environments based on object detection

A great number of visual simultaneous localization and mapping (VSLAM) systems need to assume static features in the environment. However, moving objects can vastly impair the performance of a VSLAM system which relies on the static-world assumption. To cope with this challenging topic, a real-time and robust VSLAM system based on ORB-SLAM2 for dynamic environments was proposed. To reduce the influence of dynamic content, we incorporate the deep-learning-based object detection method in the visual odometry, then the dynamic object probability model is added to raise the efficiency of object detection deep neural network and enhance the real-time performance of our system. Experiment with both on the TUM and KITTI benchmark dataset, as well as in a real-world environment, the results clarify that our method can significantly reduce the tracking error or drift, enhance the robustness, accuracy and stability of the VSLAM system in dynamic scenes.     

车用磁流变减振器动力性能实验分析

MRF阻尼器结构简单、体积小、能耗低、反应迅速且阻尼力可调范围广, 已经成为新型履带车辆半主动悬挂系统优先选择的方案。基于磁流变液体本构关系的Bingham模型,对影响车用磁流变减振器的阻尼力的各种因素进行了综合分析。对自行研制的双出杆剪切阀式磁流变减振器进行了实验研究,获得了不同振幅、频率、电流强度下的阻尼力变化曲线,从不同的侧面获得了MRF阻尼器的动力性能。结合Hrovat限界最优半主动控制算法和车辆悬挂系统振动的半主动控制策略,仿真分析了磁流变阻尼器对整车振动的控制效果,并与LQR控制结果作了比较。     

坦克稳定器的神经滑模控制方法

针对坦克稳定器这一类非线性和不确定性的复杂控制对象,提出一种神经滑模控制方法。该方法将滑模控制与神经网络相结合,解决了控制系统跟踪性能和鲁棒性能之间的矛盾。系统中的滑模控制器保证了系统的快速跟踪性能;而神经网络具有很强的自学习功能,通过学习能够保证系统的稳定性,同时可对扰动和参数变化进行有效的抑制补偿,从而在不牺牲系统鲁棒性的同时达到削弱抖振的目的。从理论上证明了滑动平面的稳定性,并且通过仿真验证了该结果。仿真结果表明该设计方法优于经典设计,为实际设计提供了一种可行的新方法。