无人战斗机航路规划圆切线算法

通过对无人战斗机低空进入敌防区面临的各种威胁进行分析,建立了适用于圆切线算法的威胁场模型;由于可行方向法对威胁圆叠加时规划出的航路效果不理想,提出了圆的切线算法理论作为此航路规划方法的改进,采用随机产生威胁场的方法来模拟多变的战场环境,并且进行了理论分析,最后得出仿真结果.仿真证明,将两种方法结合规划出的飞行航线在航程上是比较理想的,而且路径规则的效果也得到了很大的提高.     

元胞法模拟非线性弹性层合材料中的应力波

元胞法 (MethodofCell)是在有效刚度理论的基础上发展起来的新方法 ,可以用来构造具有周期性结构单元的材料的本构 ,也可以用来模拟应力波在材料中的传播问题 ,尤其是具有分层结构的材料。本文中给出两种常见的初值条件 ,并利用该方法模拟了非线性弹性材料的动态响应 ,研究了波在该层合材料中的振荡现象     

利用模态迭加法进行动响应分析应注意的问题

采用MSC-MARC程序的模态迭加法,对具有指数规律冲击载荷作用下的简支矩形板进行了响应计算,指出并讨论了应用模态迭加法求解结构动响应时应注意的几个问题.     

A Bayesian analysis on the effect of multiple supply options in a quick response environment

In the apparel industry, vendors often suffer from high mismatches in supply and demand. To cope with this problem, they procure the same style product from different suppliers with different manufacturing costs. Especially in the quick response environment, which allows vendors to monitor trends in customer demand and search for available suppliers through the electronic market, they have additional opportunities to improve their decision‐making. In this paper, we propose an analytical profit maximization model and develop efficient decision tools to help both the middle and lower level managers pursuing this strategy. Furthermore, we have shown how significantly the vendors' potential competitive edge can be improved by exploiting multiple supply options, even at the expense of high premium procurement costs for late orders. The effect is critical, especially in a highly competitive market, and it has important implications for the top managers. © 2003 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

A specially structured nonlinear integer resource allocation problem

We present an algorithm for solving a specially structured nonlinear integer resource allocation problem. This problem was motivated by a capacity planning study done at a large Health Maintenance Organization in Texas. Specifically, we focus on a class of nonlinear resource allocation problems that involve the minimization of a convex function over one general convex constraint, a set of block diagonal convex constraints, and bounds on the integer variables. The continuous variable problem is also considered. The continuous problem is solved by taking advantage of the structure of the Karush‐Kuhn‐Tucker (KKT) conditions. This method for solving the continuous problem is then incorporated in a branch and bound algorithm to solve the integer problem. Various reoptimization results, multiplier bounding results, and heuristics are used to improve the efficiency of the algorithms. We show how the algorithms can be extended to obtain a globally optimal solution to the nonconvex version of the problem. We further show that the methods can be applied to problems in production planning and financial optimization. Extensive computational testing of the algorithms is reported for a variety of applications on continuous problems with up to 1,000,000 variables and integer problems with up to 1000 variables. © 2003 Wiley Periodicals, Inc. Naval Research Logistics 50: 770–792, 2003.     

基于红外图像的小目标检测与跟踪方法

为了能在强杂波、低信噪比的情况下检测小目标,人们提出了许多针对小目标检测与跟踪的方法。介绍了基于红外图像的小目标检测和跟踪的各种方法和最新进展,重点讨论了灰度形态法、小波变换法、最优时空非线性滤波法用于小目标检测与跟踪的原理,并指出了今后的发展和研究方向。     

扭力矩对曲折槽保险机构动力学响应影响分析

在考虑扭力矩作用的基础上,建立曲折槽保险机构的动力学模型,以某机构为计算实例,与传统的动力学模型进行比较。数值计算结果表明：引信跌落到硬质地面时,扭力矩的影响作用不明显,而跌落到松软地面上时扭力矩使惯性简的位移响应明显增大,不能忽略。其结论为判断长储引信勤务处理意外跌落的安全状态提供了理论参考。     

喷涂层接触疲劳失效信号响应试验研究

采用超音速等离子喷涂设备制备了铁基自熔剂合金涂层,通过球盘式接触疲劳试验机考察了喷涂层的疲劳行为,使用扫描电子显微镜对涂层的截面和失效形貌进行了表征,研究了不同信号响应对涂层接触疲劳失效形式的指示作用。结果表明：在该应力水平下,喷涂层的接触疲劳失效形式为点蚀和分层失效。振动和扭矩信号的响应可以反馈不同的失效过程,点蚀失效过程中信号呈现渐变的特征,而分层失效过程中信号则发生明显的阶跃。     

新型BFRP筋增强混凝土受弯构件挠度控制

玄武岩纤维塑料增强筋（BFRP筋）的特性导致以其为增强筋的受弯构件出现裂缝后刚度降低非常明显,变形发展过快。因此,对BFRP筋混凝土梁的设计主要应根据其变形性能标准的要求来进行。为方便设计人员进行BFRP筋受弯构件设计,结合试验研究,通过对比国内外有关FRP筋混凝土梁开裂截面有限惯性矩计算模型的研究,探索出适合BFRP筋混凝土梁开裂截面有效惯性矩计算模型;通过建模分析,表明有限元计算模型和其他几种计算模型一起可以应用于BFRP筋混凝土梁直接挠度控制。推导出FRP筋受弯构件配筋率计算公式,结合直接挠度控制研究,提出通过控制跨高比限值来进行梁尺寸初选的间接挠度控制计算公式。     

A two‐echelon inventory‐location problem with service considerations

We study the problem of designing a two‐echelon spare parts inventory system consisting of a central plant and a number of service centers each serving a set of customers with stochastic demand. Processing and storage capacities at both levels of facilities are limited. The manufacturing process is modeled as a queuing system at the plant. The goal is to optimize the base‐stock levels at both echelons, the location of service centers, and the allocation of customers to centers simultaneously, subject to service constraints. A mixed integer nonlinear programming model (MINLP) is formulated to minimize the total expected cost of the system. The problem is NP‐hard and a Lagrangian heuristic is proposed. We present computational results and discuss the trade‐off between cost and service. © 2009 Wiley Periodicals, Inc. Naval Research Logistics 2009