结构设计对混响室场性能影响的仿真研究

通过仿真计算,分别研究了尺寸比例设计对混响室场均匀性的影响和体积变化对混响室电场强度大小的影响。数据结果表明：混响室内工作区域的场均匀性随着混响室长／宽比值增大而变差,且为获得场均匀性较优的测试环境,长宽比例应〈2。同时证明了混响室存在一临界体积上限,小于临界体积上限时,随着体积的增大,室内的电场强度逐渐减小,场均匀性逐渐提高;达到临界体积上限后,室内的场均匀性开始变差,混响室逐渐丧失对电磁波的混响作用。通过仿真计算得出混响室模型临界体积上限为10^4m^3。     

基于均匀实验设计的温压战斗部爆炸冲击波毁伤仿真研究

以温压战斗部爆炸冲击波对地下目标的毁伤为背景,设计毁伤仿真模拟的基本方案,在对影响冲击波毁伤因素合理分析的基础上,利用均匀试验设计方法设计以装药密度、空气温度、大气压强以及混凝土密度为影响因素的均匀试验方案,最后通过正态分布检验图和Bootstrap法等方法对毁伤参数的统计特性进行研究。结果表明,固定条件下温压战斗部爆炸冲击波对地下目标的毁伤中,毁伤参数值具有明显的正态分布特性,对后续结合现场试验数据确定毁伤参数真值和毁伤试验鉴定提供了一定的指导和借鉴作用。     

基于小波变换和中值滤波的无人机图像去噪算法

在无人机航拍图像的实时传输过程中,有可能会同时受到脉冲和高斯混合噪声的污染,为后续图像的识别造成很大的困难.针对这种情况,提出了一种基于中值滤波和小波变换相结合的图像去噪方法.仿真结果表明,该方法不仅能有效地滤除脉冲和高斯的混合噪声,而且可以很好地保留图像的细节信息,改善图像的视觉效果.     

采用弹道修正技术的红外干扰弹性能优化

针对弹道修正弹的高维非线性特性导致的性能优化难题,改变概念设计阶段传统的串行设计方式,提出了一种基于实验设计(Design Of Experiments,DOE)和响应面(Response Surface Methodology,RSM)的智能优化算法,定义基本的弹丸结构模型以及相关的设计参数.在DOE的基础上,将设计...     

探空火箭级间段的CAD系统

本文在CADKEY绘图软件包的支持下,开发了加筋圆柱结构CAD系统—Hcadx.此系统通过菜单引导用户的操作,可用经验公式或解析法作轴压稳定分析,用罚函数法优化参数,可以在不退出Hcadx的情况下启动CADKEY,自动绘制设计草图。此草图经过适当地编辑、修改、便可成为工程中能接受的工作图纸。     

Equity in genetic newborn screening

State‐level newborn screening allows for early treatment of genetic disorders, which can substantially improve health outcomes for newborns. As the cost of genetic testing decreases, it is becoming an essential part of newborn screening. A genetic disorder can be caused by many mutation variants; therefore, an important decision is to determine which variants to search for (ie, the panel design), under a testing budget. The frequency of variants that cause a disorder and the incidence of the disorder vary by racial/ethnic group. Consequently, it is important to consider equity issues in panel design, so as to reduce disparities among different groups. We study the panel design problem using cystic fibrosis (CF) as a model disorder, considering the trade‐offs between equity and accuracy, under a limited budget. Most states use a genetic test in their CF screening protocol, but panel designs vary, and, due to cost, no state's panel includes all CF‐causing variants. We develop models that design equitable genetic testing panels, and compare them with panels that maximize sensitivity in the general population. Our case study, based on realistic CF data, highlights the value of equitable panels and provides important insight for newborn screening practices.     

重力势能锁止型外骨骼设计及其效能评价

现存的被动式外骨骼存在助力效果不明显等缺陷。基于人体步态特征,提出了将人体行走过程中的重力势能转化为人体抬腿过程中动能的原理,通过弹簧、曲柄滑块机构、棘轮棘爪机构以及链传动机构的组合,设计了一款被动式下肢机械外骨骼,并通过外骨骼动力学分析和生理消耗指数实验测试的方法进行了外骨骼性能评价。动力学分析结果表明,穿戴外骨骼后髋关节峰力矩总量降低了23.43%,髋关节做功总量降低了30.59%,初步验证了外骨骼的有效性。生理消耗指数实验测试结果表明, 穿戴外骨骼对于短距离动作转换未产生显著效果,但在长距离行走和上坡行走中分别降低了8.1%和10.4%的能量消耗。因此,该下肢外骨骼助力性能得到了验证,为相关领域的研究提供了实例化参考。     

Multi-objectives nonlinear structure optimization for actuator in trajectory correction fuze subject to high impact loadings

This paper presents an actuator used for the trajectory correction fuze, which is subject to high impact loadings during launch. A simulation method is carried out to obtain the peak-peak stress value of each component, from which the ball bearings are possible failures according to the results. Subsequently, three schemes against impact loadings, full-element deep groove ball bearing and integrated raceway, needle roller thrust bearing assembly, and gaskets are utilized for redesigning the actuator to effectively reduce the bearings' stress. However, multi-objectives optimization still needs to be conducted for the gaskets to decrease the stress value further to the yield stress. Four gasket's structure parameters and three bearings' peak-peak stress are served as the four optimization variables and three objectives, respectively. Optimized Latin hypercube design is used for generating sample points, and Kriging model selected according to estimation result can establish the relationship between the variables and objec-tives, representing the simulation which is time-consuming. Accordingly, two optimization algorithms work out the Pareto solutions, from which the best solutions are selected, and verified by the simulation to determine the gaskets optimized structure parameters. It can be concluded that the simulation and optimization method based on these components is effective and efficient.     

Fuzzy recognition of missile borne multi-line array infrared detection based on size calculating

In order to improve the infrared detection and discrimination ability of the smart munition to the dy-namic armor target under the complex background, the multi-line array infrared detection system is established based on the combination of the single unit infrared detector. The surface dimension features of ground armored targets are identified by size calculating solution algorithm. The signal response value and the value of size calculating are identified by the method of fuzzy recognition to make the fuzzy classification judgment for armored target. According to the characteristics of the target signal, a custom threshold de-noising function is proposed to solve the problem of signal preprocessing. The multi-line array infrared detection can complete the scanning detection in a large area in a short time with the characteristics of smart munition in the steady-state scanning stage. The method solves the disadvan-tages of wide scanning interval and low detection probability of single unit infrared detection. By reducing the scanning interval, the number of random rendezvous in the infrared feature area of the upper surface is increased, the accuracy of the size calculating is guaranteed. The experiments results show that in the fuzzy recognition method, the size calculating is introduced as the feature operator, which can improve the recognition ability of the ground armor target with different shape size.     

A novel formulation of material nonlinear analysis in structural mechanics

This article demonstrates a novel approach for material nonlinear analysis. This analysis procedure eliminates tedious and lengthy step by step incremental and then iterative procedure adopted classically and gives direct results in the linear as well as in nonlinear range of the material behavior. Use of elastic moduli is eliminated. Instead, stress and strain functions are used as the material input in the analysis procedure. These stress and strain functions are directly derived from the stress-strain behavior of the material by the method of curve fitting. This way, the whole stress-strain diagram is utilized in the analysis which naturally exposes the response of structure when loading is in nonlinear range of the material behavior. It is found that it is an excellent computational procedure adopted so far for material nonlinear analysis which gives very accurate results, easy to adopt and simple in calculations. The method eliminates all types of linearity assumptions in basic derivations of equations and hence, eliminates all types of possibility of errors in the analysis procedure as well. As it is required to know stress distribution in the structural body by proper modelling and structural idealization, the proposed analysis approach can be regarded as stress-based analysis procedure. Basic problems such as uniaxial problem, beam bending, and torsion problems are solved. It is found that approach is very suitable for solving the problems of fracture mechanics. Energy release rate for plate with center crack and double cantilever beam specimen is also evaluated. The approach solves the fracture problem with relative ease in strength of material style calculations. For all problems, results are compared with the classical displacement-based liner theory.