高炮人-机跟踪系统建模及动态特性分析

本文以某高炮人-机系统为对象,以人的最优控制模型为基础,建立该人-机跟踪系统部分的数学模型,利用计算机求解——即模型预测方法,研究操作者(炮手)在跟踪沿不同航路飞行的空中目标时系统的跟踪误差和动态性能;与此同时研制一套模拟原高炮人-机系统的仿真试验装置,以获取的试验数据做为检验上述模型预测结果和进行全系统性能分析的依据。     

飞行控制软件导航仿真模型遥测数据注入仿真

研究了飞行控制软件导航仿真模型遥测数据注入仿真中的一些问题,构造了遥测数据输入序列的误差补偿算法,重建相应的输入序列,使得将它们注入到相应的数字仿真模型进行仿真时,得到的输出与飞行试验中弹上计算机发送的遥测数据相符。     

机动目标建模及机动检测算法

为解决机动目标跟踪问题,建立了非机动(匀速直线运动)和机动目标当前统计两种动态模型,并对机动目标当前统计模型的输入控制的估计进行了适当改进.同时对非机动模型的观测残差和机动模型的输入估计进行检验,以便准确检测目标机动.     

A nonparametric Bayes approach to decide system burn-in time

Burn-in is the preconditioning of assemblies and the accelerated power-on tests performed on equipment subject to temperature, vibration, voltage, radiation, load, corrosion, and humidity. Burn-in techniques are widely applied to integrated circuits (IC) to enhance the component and system reliability. However, reliability prediction by burn-in at the component level, such as the one using the military (e.g., MIL-STD-280A, 756B, 217E [23–25]) and the industrial standards (e.g., the JEDEC standards), is usually not consistent with the field observations. Here, we propose system burn-in, which can remove many of the residual defects left from component and subsystem burn-in (Chien and Kuo [6]). A nonparametric model is considered because 1) the system configuration is usually very complicated, 2) the components in the system have different failure mechanisms, and 3) there is no good model for modeling incompatibility among components and subsystems (Chien and Kuo [5]; Kuo [16]). Since the cost of testing a system is high and, thus, only small samples are available, a Bayesian nonparametric approach is proposed to determine the system burn-in time. A case study using the proposed approach on MCM ASIC's shows that our model can be applied in the cases where 1) the tests and the samples are expensive, and 2) the records of previous generation of the products can provide information on the failure rate of the system under investigation. © 1997 John Wiley & Sons, Inc. Naval Research Logistics 44: 655–671, 1997     

Estimating reliability of components with increasing failure rate using series system data

The maximum likelihood estimator (MLE) for a distribution function with increasing failure rate is derived, based on a collection of series system data. Applications can arise in industries where operating environments make available only such system-level data, due to system configuration or type-II censoring. The estimator can be solved using isotonic regression. For the special case in which systems contain one component, the estimator is equivalent to the restricted maximum likelihood estimator of Marshall and Proschan [9]. The MLE is illustrated using emergency diesel generator failure data from the nuclear industry. © 1998 John Wiley & Sons, Inc. Naval Research Logistics 45: 115–123, 1998     

Pairwise model discrimination with applications in lifetime distributions and degradation processes

Reliability data obtained from life tests and degradation tests have been extensively used for purposes such as estimating product reliability and predicting warranty costs. When there is more than one candidate model, an important task is to discriminate between the models. In the literature, the model discrimination was often treated as a hypothesis test and a pairwise model discrimination procedure was carried out. Because the null distribution of the test statistic is unavailable in most cases, the large sample approximation and the bootstrap were frequently used to find the acceptance region of the test. Although these two methods are asymptotically accurate, their performance in terms of size and power is not satisfactory in small sample size. To enhance the small‐sample performance, we propose a new method to approximate the null distribution, which builds on the idea of generalized pivots. Conventionally, the generalized pivots were often used for interval estimation of a certain parameter or function of parameters in presence of nuisance parameters. In this study, we further extend the idea of generalized pivots to find the acceptance region of the model discrimination test. Through extensive simulations, we show that the proposed method performs better than the existing methods in discriminating between two lifetime distributions or two degradation models over a wide range of sample sizes. Two real examples are used to illustrate the proposed methods.     

高效率机动部署航空武器靶场关键技术和应用

为用户设计了一个航空武器试验靶场,具备空空、空地和地空导弹试验能力,可机动部署,具有易于运行和运维代价低的特点。靶场由载机遥测系统、测量雷达、光电跟踪系统、微波和光纤通信系统、靶机遥测站、指挥控制等6个子系统构成;指挥控制子系统之外的5个子系统均使用国产成熟产品。在总体方案和指挥控制子系统设计中,对互联集成方案、机动部署、试验航线设计和发布、自动化领航、自动化指挥决策等5项关键技术进行了着重优化。在实际应用中,全靶场运行仅需20多成员(不含飞行和机场机务人员),3天内完成新试验场部署和联调,对作战部队飞行员进行5架次航线训练后即进行实弹试验,2天内完成多发中程拦截和近距格斗空空导弹试验。     

Parametric study of single confined fragment launch explosive device

In this article, parametric study of single confined fragment launch device was carried out. The configuration proposed was further studied to derive the empirical relationship for effect of fragment size, charge size, confinement thickness on fragment velocity. The simulations were carried out using ANSYS-AUTODYNE explicit solver. Fragment velocities were estimated as a function of different parametric combinations of explosive quantities, charge length to diameter ratio, fragment height to diameter ratio, confinement thickness, fragment material and fragment mass. The data was further converted to charge to metal ratio under fragment and confinement. It was observed that, increase in confinement thickness, charge quantity and decrease in fragment height increases the fragment velocity. It is also noted that, charge to metal mass ratio under fragment significantly affects the fragment velocity. At the end, an empirical relationship for fragment velocity interms of all these parameters was established. Using these relations, two velocities 1831.92 m/s and 2523.9 m/s required for NATO STANAG 4496 IM test were estimated. The design parameters for these velocities are presented. Also, the results estimated using the empirical relationship has been compared with published experimental data. Error in the predicted velocities is within the acceptable range. The empirical relationship proposed will be useful for finalization of design of the fragment launch device.     

利用过阻尼电路合成高压方波脉冲

在过阻尼RLC电路分时放电的基础上,提出新型高压方波脉冲产生方法。理论分析表明:过阻尼RLC电路产生的双指数电压波与脉冲形成线产生的方形电压波具有类似的上升沿和平顶。电路模拟表明:通过人工过零技术可以对双指数电压波进行截尾,从而形成完整的高压方波脉冲。建立了原理验证性样机,由两组RLC电路构成,每组电路包含一台脉冲电容器和一只三电极场畸变气体开关,两组电路共用一个上升沿调节电感。实验证明:样机可以在电阻负载上输出幅值为17 kV、平顶宽度为330 ns～5.8μs、上升沿为100～350 ns的单极性高压方波脉冲。该方法适应性强,对负载变化不敏感,同时具有良好的可调节性,方波上升沿、平顶宽度连续独立可调。     

PMI泡沫夹层结构雷达天线罩间接热-结构耦合分析与实验研究

机载PMI泡沫夹层结构雷达天线罩在环境温度变化时将产生表面变形现象并影响其使用性能,但对天线罩热变形结果进行实时检测分析具有一定难度。通过ANSYS间接热-结构耦合法建立了分析模型,对天线罩进行了计算分析,采用热膨胀片状模型进行了理论分析,在此基础上,设计并开展了温度冲击实验研究。结果表明, PMI夹层结构天线罩的热-结构耦合变形综合应变趋势是棱边处膨胀程度最大,由边缘至天线罩透波面中心处,膨胀程度逐渐减小;间接热-结构耦合计算应变值与实测应变值之间平均相差35.08%,间接热-结构耦合分析方法与模型具有一定的可信性。