自组装SiO2光子晶体线形阵列

采用溶剂蒸发技术在硅槽内对自制的SiO2微球进行组装,获得了具有显著光子带隙特征的SiO2光子晶体线形阵列,与平坦表面生长的光子晶体相比,微球在微槽内的自组装行为受到了明显的限制作用.     

Approximations and empirics for stochastic war equations

The article develops a theorem which shows that the Lanchester linear war equations are not in general equal to the Kolmogorov linear war equations. The latter are time‐consuming to solve, and speed is important when a large number of simulations must be run to examine a large parameter space. Run times are provided, where time is a scarce factor in warfare. Four time efficient approximations are presented in the form of ordinary differential equations for the expected sizes and variances of each group, and the covariance, accounting for reinforcement and withdrawal of forces. The approximations are compared with “exact” Monte Carlo simulations and empirics from the WWII Ardennes campaign. The band spanned out by plus versus minus the incremented standard deviations captures some of the scatter in the empirics, but not all. With stochastically varying combat effectiveness coefficients, a substantial part of the scatter in the empirics is contained. The model is used to forecast possible futures. The implications of increasing the combat effectiveness coefficient governing the size of the Allied force, and injecting reinforcement to the German force during the Campaign, are evaluated, with variance assessments. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005.     

Production‐inventory systems with imperfect advance demand information and updating

We consider a supplier with finite production capacity and stochastic production times. Customers provide advance demand information (ADI) to the supplier by announcing orders ahead of their due dates. However, this information is not perfect, and customers may request an order be fulfilled prior to or later than the expected due date. Customers update the status of their orders, but the time between consecutive updates is random. We formulate the production‐control problem as a continuous‐time Markov decision process and prove there is an optimal state‐dependent base‐stock policy, where the base‐stock levels depend upon the numbers of orders at various stages of update. In addition, we derive results on the sensitivity of the state‐dependent base‐stock levels to the number of orders in each stage of update. In a numerical study, we examine the benefit of ADI, and find that it is most valuable to the supplier when the time between updates is moderate. We also consider the impact of holding and backorder costs, numbers of updates, and the fraction of customers that provide ADI. In addition, we find that while ADI is always beneficial to the supplier, this may not be the case for the customers who provide the ADI. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

化学激光器环形与线形分流管道对比的数值分析

环柱型化学激光器中使用的分流管道的总管为环形弯曲管道,支管分布在内侧圆弧或外侧圆弧上,结构与线形分流管道有较大差别。应用计算流体力学方法,对上述各分流管道进行了三维的数值模拟及对比分析。结果表明,线形分流管道总管内的总压高于支管分布在外侧圆弧上的环形管道,但低于支管分布在内侧圆弧上的环形管道;无论是支管分流,抑或环形管道内的二次流现象都会使总管截面上产生径向速度,使得流体流动呈现明显的三维特征;分流管道各支管流量沿主流流动方向基本上是上升的,这与总管的总压分布趋势相反,而与总管的静压分布趋势相似;比较而言,支管分布在外侧圆弧上的环形分流管道的支管流量波动幅度最小,在均匀分配气流方面最具优势,线形分流管道居中,支管分布在内侧圆弧上的环形分流管道最差。     

基于LMI的磁轴承-转子系统鲁棒增益调度控制器设计

针对陀螺效应明显的磁轴承-转子系统转速变化引起的模型变化而带来的控制问题,提出基于LMI的鲁棒增益调度方法设计控制器.通过建立系统依转速变化的LPV模型,设计了鲁棒增益调度控制器,使转子在全转速范围内保证了鲁棒稳定性和性能.为降低控制器设计的保守性,可缩小转速区间设计控制器使控制性能得到提高.与基于LTI模型设计的鲁棒...     

武器装备体系能力多视图模型研究

针对武器装备体系能力概念抽象、关系复杂特点导致建模困难、重用性差、语义不一致等诸多问题,提出了一种基于本体的能力多视图模型构建方法,建立了6个能力视图的元模型.该方法首先明确能力领域问题,确定武器装备体系能力领域核心本体及构建原则,然后采用形式化方法描述本体,建立核心本体的关系模型,最后面向能力视图内容建立元模型,通过...     

系统动力学C3I系统作战效能评估

C3I系统效能评估是C3I系统发展的重要问题,现有的ADC法、指数法、层次分析法和SEA方法等都存在着某种局限性,也无法度量C3I系统与作战结果的关系.系统动力学是一门分析研究信息反馈系统的学科,适合于研究C3I系统的系统效能和作战效能之间的定量关系.以一个具体的关于C3I系统的作战想定为例,构建了该C3I作战系统的因...     

信息化条件下作战体系节点重要性指标的选择

在对作战体系结构信息化演化分析的基础上,对其结构进行网络描述,引入度指标、介数指标、紧密度指标和特征向量指标等节点重要性度量指标,并根据最大连通分支的大小和平均路径长度对作战体系受到攻击后的受损程度进行度量,进而选择出最有效的重要性指标,是对作战体系节点重要性指标选择的有益探索,可以为体系对抗中关键节点判定等问题的深入...     

线性系统的降维状态观测器参数化设计方法

在线性系统可观测的情况下,研究了降维状态观测器设计问题。通过非奇异线性变换,得到代数等价系统的同时分离出需观测的部分状态。基于Sylvester矩阵方程的参数化解,给出降维观测器的增益矩阵的参数化表达形式,从而给出了线性系统的降维状态观测器设计的一种参数化方法。数值算例表明：所提降维状态观测器的参数化设计方法是简单有效的。     

被动声纳浮标目标运动分析及其仿真计算

针对直升机搜索潜艇的特点,研究了被动声纳浮标目标运动分析问题。对固定目标和匀速直线运动目标,分别应用确定性计算和线性最小二乘法进行数学建模及其仿真。仿真结果表明该模型可行,能对被动式声纳浮标搜潜的目标定位提供算法依据。