基于应变局部化理论的剑桥模型改进

应用传统的弹塑性理论模型在分析剪切带的时候遇到了很多困难,如控制方程失去椭圆性等,其原因是传统的弹塑性理论模型并没有包含材料的内部参数。在剑桥模型的基础上,考虑应变二阶梯度,提出一种新的计算剪切带的理论模型。当应变局部化发生时,带内土体采用该模型计算,带外土体则按照传统弹塑性模型计算。该理论模型汲取了剑桥模型实验参数少,应用简便的优点。     

基于XML的诊断信息模型描述

利用XML语言对诊断信息模型进行描述,初步建立了诊断信息模型整体框架的XML Schema,并在专门开发工具XML Spy中得到实现,同时对基于XML的信息模型描述进行了简要的应用说明,验证了模型描述的有效性。     

装甲车辆发动机汽缸套与活塞环磨损计算模型

为研究装甲车辆发动机汽缸套与活塞环的磨损规律,在总结汽缸套与活塞环磨损计算理论的基础上,通过黏着机理磨损的计算和分析,对基于润滑分析磨损模型、基于瞬态过程理论磨损模型和通用磨损模型3种典型模型的建模思路、求解方法和计算误差等内容进行了比较,确定基于润滑分析的磨损模型作为装甲车辆汽缸套与活塞环磨损研究的计算模型。     

正畸力作用下微种植体支抗的应力分析

通过建立直径为1.4,1.6,1.8 mm,长度为6,8,10 mm,螺纹深度为0.2 mm,螺纹间距0.5 mm的Ti质微种植体支抗与颌骨有限元模型,研究在常用载荷1.96 N正畸力与微种植体长轴呈45°,60°和75°三种角度时的Ti质微种植体应力分布和大小。分析得出,应力主要集中在微种植体颈部1 mm内,在其颈部1.2 mm的范围内应力值的衰减都很明显,在颈部1.2 mm的范围内曲线较陡。在设定的加载条件下,不同直径的微种植体应力值呈规则的变化趋势,直径1.8 mm,45°时微种植体的各应力值极值最小。微种植体长度对应力的影响不大,位移变化均较小。     

基于影响图方法的信息战模型

由于粒子滤波的算法原理,其计算量很大。研究了针对机动目标的交互式多模型粒子滤波器(IMMPF)算法和多速率交互式多模型(MRIMM)算法,提出了多速率交互式多模型粒子滤波器(MRIMMPF)算法。该算法是在交互式多模型粒子滤波器(IMMPF)的基础上引入多速率技术,期望在保持IMMPF的性能同时能够减少因为粒子滤波带来的计算量;最后通过和一般基于EKF的IMM算法、IMMPF算法的比较,验证了该算法的有效性。     

基于灰色理论的防御要点优选模型及应用

运用多目标决策分析原理,依据选择防御要点的基本要求,从"地位重要、地形有利、地幅适当"的角度分析了防御要点的影响因素集,运用灰色理论建立了防御要点灰色关联优选模型,达到了对防御要点进行排序和优选的目的,为指挥员实施防御作战的科学决策提供辅助依据。     

A model for step‐stress accelerated life testing

Modern technology is producing high reliability products. Life testing for such products under normal use condition takes a lot of time to obtain a reasonable number of failures. In this situation a step‐stress procedure is preferred for accelerated life testing. In this paper we assume a Weibull and Lognormal model whose scale parameter depends upon the present level as well as the age at the entry in the present stress level. On the basis of that we propose a parametric model to the life distribution for step‐stress testing and suggest a suitable design to estimate the parameters involved in the model. A simulation study has been done by the proposed model based on maximum likelihood estimation. © 2003 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

Determination of burn‐in parameters and residual life for highly reliable products

Today, many products are designed and manufactured to function for a long period of time before they fail. Determining product reliability is a great challenge to manufacturers of highly reliable products with only a relatively short period of time available for internal life testing. In particular, it may be difficult to determine optimal burn‐in parameters and characterize the residual life distribution. A promising alternative is to use data on a quality characteristic (QC) whose degradation over time can be related to product failure. Typically, product failure corresponds to the first passage time of the degradation path beyond a critical value. If degradation paths can be modeled properly, one can predict failure time and determine the life distribution without actually observing failures. In this paper, we first use a Wiener process to describe the continuous degradation path of the quality characteristic of the product. A Wiener process allows nonconstant variance and nonzero correlation among data collected at different time points. We propose a decision rule for classifying a unit as normal or weak, and give an economic model for determining the optimal termination time and other parameters of a burn‐in test. Next, we propose a method for assessing the product's lifetime distribution of the passed units. The proposed methodologies are all based only on the product's initial observed degradation data. Finally, an example of an electronic product, namely contact image scanner (CIS), is used to illustrate the proposed procedure. © 2002 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

A general model of heterogeneous system lifetimes and conditions for system burn‐in

Burn‐in is a technique to enhance reliability by eliminating weak items from a population of items having heterogeneous lifetimes. System burn‐in can improve system reliability, but the conditions for system burn‐in to be performed after component burn‐in remain a little understood mathematical challenge. To derive such conditions, we first introduce a general model of heterogeneous system lifetimes, in which the component burn‐in information and assembly problems are related to the prediction of system burn‐in. Many existing system burn‐in models become special cases and two important results are identified. First, heterogeneous system lifetimes can be understood naturally as a consequence of heterogeneous component lifetimes and heterogeneous assembly quality. Second, system burn‐in is effective if assembly quality variation in the components and connections which are arranged in series is greater than a threshold, where the threshold depends on the system structure and component failure rates. © 2003 Wiley Periodicals, Inc. Naval Research Logistics 50: 364–380, 2003.     

微分对策界栅理论在舰艇作战能力评估中的应用

作战能力是表征战斗舰艇战术技术性能的一项重要指标,如何正确评价舰艇的作战能力一直是军事运筹研究的热点.利用定性微分对策的界栅理论研究了一类作战问题,通过构造捕获区面积和咽喉区域面积,并以此作为动态评估舰艇作战能力的衡量指标.研究结果可为综合评价舰艇作战能力提供一条新途径.