反电动势对无扰载荷航天器精确定向的影响

无扰载荷航天器中非接触式作动器反电动势会引起有效载荷模块与支持模块之间的耦合,影响有效载荷模块的精确定向性能。通过建立无扰载荷航天器的耦合动力学模型,分析非接触式作动器反电动势对有效载荷模块精确定向性能的影响。考虑六支杆立方构型无扰载荷接口,结合拉格朗日方程和牛顿欧拉方法建立有效载荷模块平台动力学模型。推导非接触式作动器的输出力模型,并引入有效载荷模块平台动力学模型,给出考虑非接触式作动器反电动势的耦合动力学模型。将支持模块上飞轮动静不平衡引起的谐振作为干扰力矩,建立了无扰载荷航天器在轨定向状态的Simulink仿真模型。仿真结果表明,反电动势系数越大,干扰力矩对有效载荷模块的影响越大,有效载荷模块精确定向精度越低。     

多点喷射空气酒精燃气发生器试验验证

为有效解决现有燃气引射气源存在的诸多缺点,适应一种引射系统大流量、小型化的需要,在综合分析各燃气引射气源方案的基础上,研制了一种以空气、酒精作为推进剂的多点喷射结构的燃气发生器,并开展了多种工况下的试验研究。结果表明:采用的多点喷射方案大大提高了空间利用率,有效满足了引射系统小型化的要求;喷雾性能好,喷雾锥角及粒径优于设计指标要求;点火可靠性高,解决了领域内现有燃气发生器点火可靠性低的缺点;点火迅速,燃烧平稳,可实现较为均匀的出口温度场;燃气发生器工作范围较宽,能在余气系数2.52～4.34范围内稳定燃烧;高效的火焰筒内壁空气冷却方式有效保证了燃气发生器长时间工作运行。     

基于信息需求的情报支持效能分析

经典的侦察与监测(S&R)系统效能分析方法存在模型难以建立、结果不准确等问题。考虑到S&R系统的目的是提供情报支持,提出一种基于信息需求的S&R系统情报支持效能分析方法。该方法以用户的信息需求为度量基准量,比较S&R系统性能对信息需求的满足度,并以此满足度作为S&R系统效能度量的指标。仿真实例表明了新方法的有用性。     

基于运输问题的国防动员任务规划模型研究

国防动员任务规划为执行动员保障任务提供明确的方案计划,是高效有序开展国防动员协同保障的重要前提和关键环节,既要综合考虑各类影响因素,又要确保对接结果适时、适量、适地、适度.本文分析了动员任务规划的现实问题,通过梳理实际开展动员任务规划的阶段步骤,明确了动员任务规划模型的研究内涵和边界;在此基础上,建立了国防动员任务规划...     

车联网环境下车辆协同高精度定位研究进展

车辆位置信息是许多智能交通应用的基础,如车辆导航、路径规划和车辆编队等.现有研究中融合单车车载多源传感器的定位方法无法有效解决城市峡谷、隧道和立交桥等卫星信号不可用条件下的车辆定位问题.围绕车辆高精度定位进行了综合评述,主要深入研究分析了车辆协同定位技术.首先分析了单车自主定位的关键技术及其主要应用场景;然后对车辆协同...     

融合初值校准与二阶逼近的单星测频定位算法

为减小单星测频定位的误差,提出一种融合初值校准与二阶逼近的单星测频定位算法。该算法在卫星接收信号多普勒频移为零的时间点,通过测距获得卫星到定位目标的距离信息,利用距离信息修正轨道平面与定位目标的几何关系,为初值的选取提供校准手段;将校准的初值代入含二阶级数的定位方程泰勒展开式,通过较少次数的迭代得到定位目标的真实位置,从而降低定位的算法复杂度,提高定位精度。仿真结果表明,所提出的算法与多普勒单星定位算法相比,迭代次数和定位误差大幅度减小,其实现简单、计算量少、误差小,在单星定位研究领域具有较高的理论价值和实用价值。     

基于改进遗传算法的舰载机保障调度方法

舰载机保障作业过程受到多资源约束,同时可能存在着突发事件的干扰;针对此特点,分析并制定干扰情况下的模型修正策略。在遗传算法中引入禁忌搜索算子改进传统遗传算法的变异操作,并通过具体实例进行仿真验证,其结果证明改进后的遗传算法在优化含干扰事件的多机保障问题时效率更高,并通过甘特图直观地反映重调度方案。为真实情况下有效处理舰载机保障过程中的干扰事件奠定理论基础。     

对美国“忠诚僚机”的思考及对策建议

用无人机担任僚机已成为战斗机编组作战领域技战术研究的新热点。本文通过跟踪美国“忠诚僚机”项目的试验进展,了解所用无人僚机和战斗机平台的性能及特点,把握长僚机编组作战对无人僚机的基本指标需求。在此基础上,结合美军分布式作战概念的演变、智能空战技术研究和现有装备改装趋势等因素,分析了“忠诚僚机”项目在推进空中分布式作战概念实用化、提高长僚机编组作战效能以及形成规模化无人僚机装备方面可能产生的影响。基于上述分析,得出无人僚机与有人战斗机编组作战是军队需要面对的新型作战样式这一结论,并结合国内空战理论研究、军用无人机制造能力以及反无人机装备的发展情况,给出整合资源发展优势无人机、以硬杀伤和软杀伤多种形式构建有效反制体系的对策建议。     

Numerical simulation of the blast wave of a multilayer composite charge

The numerical simulation of a blast wave of a multilayer composite charge is investigated. A calculation model of the near-field explosion and far-field propagation of the shock wave of a composite charge is established using the AUTODYN finite element program. Results of the near-field and far-field calculations of the shock wave respectively converge at cell sizes of 0.25–0.5 cm and 1–3 cm. The Euler––flux-corrected transport solver is found to be suitable for the far-field calculation after mapping. A numerical simulation is conducted to study the formation, propagation, and interaction of the shock wave of the composite charge for different initiation modes. It is found that the initiation mode obviously affects the shock-wave waveform and pressure distribution of the composite charge. Additionally, it is found that the area of the overpressure distribution is greatest for internal and external simultaneous initiation, and the peak pressure of the shock wave exponentially decays, fitting the calculation formula of the peak overpressure attenuation under different initiation modes, which is obtained and verified by experiment. The difference between numerical and experimental results is less than 10%, and the peak overpressure of both internal and external initiation is 56.12% higher than that of central single-point initiation.     

Experimental research on the instability propagation characteristics of liquid kerosene rotating detonation wave

In order to study the instability propagation characteristics of the liquid kerosene rotating detonation wave (RDW), a series of experimental tests were carried out on the rotating detonation combustor (RDC) with air-heater. The fuel and oxidizer are room-temperature liquid kerosene and preheated oxygen-enriched air, respectively. The experimental tests keep the equivalence ratio of 0.81 and the oxygen mass fraction of 35% unchanged, and the total mass flow rate is maintained at about 1000 g/s, changing the total temperature of the oxygen-enriched air from 620 K to 860 K. Three different types of instability were observed in the experiments: temporal and spatial instability, mode transition and re-initiation. The interaction between RDW and supply plenum may be the main reason for the fluctuations of detonation wave velocity and pressure peaks with time. Moreover, the inconsistent mixing of fuel and oxidizer at different circumferential positions is related to RDW oscillate spatially. The phenomenon of single-double-single wave transition is analyzed. During the transition, the initial RDW weakens until disappears, and the compression wave strengthens until it becomes a new RDW and propagates steadily. The increased deflagration between the detonation products and the fresh gas layer caused by excessively high temperature is one of the reasons for the RDC quenching and re-initiation.