基于等效电路和点电流源的潜艇水下腐蚀电场估算

为了对潜艇涂层破损状态的水下腐蚀电场进行快速评估,基于电化学腐蚀原理和潜艇结构特点,建立潜艇涂层局部破损时的腐蚀电流等效电路,对潜艇涂层局部破损时的腐蚀电流强度进行估算,并基于点电流源对潜艇腐蚀电场建模,将潜艇涂层破损部位和裸露螺旋桨等效为点电流源,利用点电流源在分层介质中的电场计算公式对潜艇涂层破损时的腐蚀稳恒电场进行估算。与某型潜艇腐蚀电场商业有限元软件COMSOL仿真结果对比表明：该估算方法得到的潜艇表面腐蚀电流和不同路径电场分布曲线规律与COMSOL仿真结果基本一致,电流估算值相对误差不超过6.5%,电场各分量峰峰值相对误差不超过18%。     

Explosion temperature mapping of emulsion explosives containing TiH2 powders with the two-color pyrometer technique

In the study, the two-color pyrometer technique was used to measure the transient temperature field of emulsion explosives with different contents of TiH₂ powders. The experimental results showed that the introduction of TiH₂ powders could significantly increase the explosion temperature and fireball duration of emulsion explosive. When emulsion explosives were ignited, the average explosion temperature of pure emulsion explosive continuously decreased while emulsion explosives added with TiH₂ powders increased at first and then decreased. When the content of TiH₂ powders was 6 mass%, the explosion average temperature reached its maximum value of 3095 K, increasing by 43.7% as compared with that of pure emulsion explosive. In addition, the results of air blast experiment and explosion heat test showed that the variation trends of shock wave parameters, explosion heat and theoretical explosion temperature of emulsion explosives with different contents of TiH₂ powders were basically consistent with that of explosion temperature measured by the two-color pyrometer technique. In conclusion, the two-color pyrometer technique would be conducive to the formula design of emulsion explosive by understanding the explosion temperature characteristics.     

激励器结构参数对合成射流影响的试验研究

为了设计高性能的合成射流激励器,实验采用热线风速仪测量激励器出口的流动速度,对不同大小激励器、不同出口形状激励器、单 双膜激励器以及金属振动膜处于不同装配受压状态下的激励器分别进行了试验。实验结果显示:激励器的结构决定了合成射流激励器的性能;激励器出口射流平均速度除了与激励器大小、出口面积有关外,还与出口形状有关,采用方孔 矩形孔形式的开口有利于建立较强的合成射流;双膜与单膜工作相比,合成射流最大速度基本上是成两倍关系;金属振动膜的安装形式(受压状态)不影响合成射流随频率的变化规律,但对合成射流速度影响很大,当激励器振动膜处于螺栓拧紧受压状态时,与振动膜不受压状态相比,合成射流出口速度几乎下降了一个数量级。     

海水中稳恒电流电场的点电极计算模型

根据点电极基本假设,利用均匀介质中稳恒电流场与静电场的相似性,分别采用分离变量法和镜像法计算了点电极稳恒电流场在空气 海水 海床三层介质平行界面模型下的电位分布,从而得到了海水中稳恒电流电场的计算模型.计算结果表明:点电极的电场分布具有明显的特征,可作为舰船电场电极阵列模拟的计算单元.     

火炮装药温度分布的数值模拟

针对火炮弹药的特点,建立了弹药的二维轴对称模型,并在圆柱坐标系下,用控制容积积分法导出一组差分离散格式。采用收敛速度快的块迭代法解代数方程组。实验数据表明数值计算的结果和实测值基本一致,经进一步研究可以用于火炮装药的温度测量。     

BBO晶体II型相位匹配光参量振荡器的输出线宽

采用355nm脉冲激光作为泵浦源,对影响BBO晶体II型相位匹配光参量振荡器输出线宽的各种物理机制进行了数值模拟计算和分析。结果表明,II型相位匹配是光参量振荡器获得窄线宽的有效而简单的手段。     

数组越界软件测试系统的设计与实现

软件测试系统的研制是现阶段软件测试领域研究的一个热点.首先针对C/C 语言常见数组越界错误类型进行了分析,介绍了软件测试的一些基本概念,而后给出了软件测试系统设计,对系统设计的各个阶段进行了说明,并且给出了一种错误类型检查的算法设计,它在软件测试检测中具有通用性和代表性,最后给出了软件测试的实验结果.     

非均布应力场中内埋裂纹的应力强度因子

在内埋裂纹线性线弹簧模型的基础上,通过引入二维权函数将裂纹面上的非均布载荷进行均布化等效,求解了中心内埋椭圆形裂纹在沿板厚非均匀分布应力场中的应力强度因子,列出了问题的奇异积分方程,利用Gauss-Chebyshev方法求解了在4种应力场分布情形下的数值结果,并与已有文献的解进行了比较,当a0/c0 ＜0.4、a0/h≤0.3时,两者结果具有较好的一致性,表明了本文方法的合理性和可靠性.     

An efficient metaheuristic for integrated scheduling and staffing IT projects based on a generalized minimum cost flow network

Scheduling IT projects and assigning the project work to human resources are an important and common tasks in almost any IT service company. It is particularly complex because human resources usually have multiple skills. Up to now only little work has considered IT‐specific properties of the project structure and human resources. In this article, we present an optimization model that simultaneously schedules the activities of multiple IT projects with serial network structures and assigns the project work to multiskilled internal and external human resources with different efficiencies. The goal is to minimize costs. We introduce a metaheuristic that decomposes the problem into a binary scheduling problem and a continuous staffing problem where the latter is solved efficiently by exploiting its underlying network structure. For comparison, we solve the mixed–binary linear program with a state–of–the–art commercial solver. The impacts of problem parameters on computation time and solution gaps between the metaheuristic and the solver are assessed in an experimental study. Our results show that the metaheuristic provides very favorable results in considerable less time than the solver for midsize problems. For larger problems, it shows a similar performance while the solver fails to return feasible solutions. © 2012 Wiley Periodicals, Inc. Naval Research Logistics 59: 111–127, 2012     

k-ary n-cube中的移动气泡流控策略

在k-ary n-cube网络中,气泡流控是一种有效、实用的死锁避免技术,它不必依赖虚通道就能避免环网中出现的死锁问题。如果流控策略能感知到维度内缓冲区的总体使用情况,就能够更加高效地进行调度,从而提高网络性能。为了避免关键气泡机制引起的阻塞,提出了伪报文协议;结合伪报文协议,设计了移动气泡流控策略,它有效实现了维度内的全局资源感知能力。与局部气泡流控相比,路由器每条输入通道仅设置一个报文缓冲区就可以避免环网中的死锁,即最小资源需求减少了一半。网络模拟结果表明,该机制不会出现永久阻塞;在distribute、hotregion和uniform传输模式中,该机制可以有效提高网络吞吐率20%以上,并且在网络饱和后吞吐率依然维持稳定。