主动隔振系统的最优控制时滞

针对主动隔振系统带有时滞的鲁棒渐进稳定问题,研究了时滞的存在对最优控制算法控制效果的影响,运用MATLAB中LMI工具,采用变步长试凑的方法,解出了最优控制系统反馈控制鲁棒渐进稳定的最大允许时滞上界。最后,通过数值仿真,验证了理论的正确性。仿真结果表明:随着控制时滞的增大,主动隔振效果逐渐变差,一旦反馈控制力时滞超过最大允许时滞上界,系统便将发散。同时,增大反馈控制力和减小加权矩阵控制目标的相应权值,可以提高最大允许时滞上界。     

超高能核-核碰撞中的重子阻止现象

利用蒙特卡罗方法计算了平均参与碰撞核子数,通过傅里叶变换从饱和模型中抽取了未积分胶子分布函数解析式,研究了美国相对论重离子对撞机（Relativistic Heavy Ion Collider, RHIC）能量下金一金碰撞中不同碰撞参数区间的重子阻止现象。计算发现：理论结果能够很好地解释BRHAMS合作组实验现象。在此基础上,对正在运行的欧洲大强子对撞机（Large Hadron Collider, LHC）能量下铅一铅碰撞中大快度区域重子阻止现象作出了理论预言。     

多机头螺杆机组的优化运行控制

风冷式冷水机组的能效较低,为了提高机组性能,机组被设计成具有2个或多个制冷剂回路的多机头形式。对多机头风冷式冷水机组的运行控制进行了研究,探讨了其优化运行控制策略,利用TRNSYS软件建立了机组模型并进行了验证,最后利用典型的办公建筑来评估采用优化运行控制策略后机组的节能潜力。同常规控制策略相比,单纯优化运行制冷剂回路的控制策略能使机组年度能耗下降6.5%,同时优化运行制冷剂回路和压缩机的控制策略能使机组年度能耗下降7.9%,节能效果显著。     

Optimal joint preventive maintenance and production policies

We study joint preventive maintenance (PM) and production policies for an unreliable production‐inventory system in which maintenance/repair times are non‐negligible and stochastic. A joint policy decides (a) whether or not to perform PM and (b) if PM is not performed, then how much to produce. We consider a discrete‐time system, formulating the problem as a Markov decision process (MDP) model. The focus of the work is on the structural properties of optimal joint policies, given the system state comprised of the system's age and the inventory level. Although our analysis indicates that the structure of optimal joint policies is very complex in general, we are able to characterize several properties regarding PM and production, including optimal production/maintenance actions under backlogging and high inventory levels, and conditions under which the PM portion of the joint policy has a control‐limit structure. In further special cases, such as when PM set‐up costs are negligible compared to PM times, we are able to establish some additional structural properties. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005.     

舰艇编队对空防御队形优化配置模型

分析了海上机动编队中防空舰的位置配置对舰艇编队拦截目标效果的影响,通过舰艇对来袭目标拦截概率的推导,建立了被掩护舰的生存概率模型,从而提供了一种解算编队防御队形最佳配置的方法。     

Signal‐to‐interference‐plus‐noise ratio estimation for wireless communication systems: Methods and analysis

The Signal‐to‐Interference‐plus‐Noise Ratio (SINR) is an important metric of wireless communication link quality. SINR estimates have several important applications. These include optimizing the transmit power level for a target quality of service, assisting with handoff decisions and dynamically adapting the data rate for wireless Internet applications. Accurate SINR estimation provides for both a more efficient system and a higher user‐perceived quality of service. In this paper, we develop new SINR estimators and compare their mean squared error (MSE) performance. We show that our new estimators dominate estimators that have previously appeared in the literature with respect to MSE. The sequence of transmitted bits in wireless communication systems consists of both pilot bits (which are known both to the transmitter and receiver) and user bits (which are known only by the transmitter). The SINR estimators we consider alternatively depend exclusively on pilot bits, exclusively on user bits, or simultaneously use both pilot and user bits. In addition, we consider estimators that utilize smoothing and feedback mechanisms. Smoothed estimators are motivated by the fact that the interference component of the SINR changes relatively slowly with time, typically with the addition or departure of a user to the system. Feedback estimators are motivated by the fact that receivers typically decode bits correctly with a very high probability, and therefore user bits can be thought of as quasipilot bits. For each estimator discussed, we derive an exact or approximate formula for its MSE. Satterthwaite approximations, noncentral F distributions (singly and doubly) and distribution theory of quadratic forms are the key statistical tools used in developing the MSE formulas. In the case of approximate MSE formulas, we validate their accuracy using simulation techniques. The approximate MSE formulas, of interest in their own right for comparing the quality of the estimators, are also used for optimally combining estimators. In particular, we derive optimal weights for linearly combining an estimator based on pilot bits with an estimator based on user bits. The optimal weights depend on the MSE of the two estimators being combined, and thus the accurate approximate MSE formulas can conveniently be used. The optimal weights also depend on the unknown SINR, and therefore need to be estimated in order to construct a useable combined estimator. The impact on the MSE of the combined estimator due to estimating the weights is examined. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

Bounding the optimal burn‐in time for a system with two types of failure

Burn‐in is a widely used method to improve the quality of products or systems after they have been produced. In this paper, we consider the problem of determining bounds to the optimal burn‐in time and optimal replacement policy maximizing the steady state availability of a repairable system. It is assumed that two types of system failures may occur: One is Type I failure (minor failure), which can be removed by a minimal repair, and the other is Type II failure (catastrophic failure), which can be removed only by a complete repair. Assuming that the underlying lifetime distribution of the system has a bathtub‐shaped failure rate function, upper and lower bounds for the optimal burn‐in time are provided. Furthermore, some other applications of optimal burn‐in are also considered. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

Optimal nonmyopic gambling strategy for the generalized Kelly criterion

We consider the optimal wagers to be made by a gambler who starts with a given initial wealth. The gambler faces a sequence of two-outcome games, i.e., “win” vs. “lose,” and wishes to maximize the expected value of his terminal utility. It has been shown by Kelly, Bellman, and others that if the terminal utility is of the form log x, where x is the terminal wealth, then the optimal policy is myopic, i.e., the optimal wager is always to bet a constant fraction of the wealth provided that the probability of winning exceeds the probability of losing. In this paper we provide a critique of the simple logarithmic assumption for the utility of terminal wealth and solve the problem with a more general utility function. We show that in the general case, the optimal policy is not myopic, and we provide analytic expressions for optimal wager decisions in terms of the problem parameters. We also provide conditions under which the optimal policy reduces to the simple myopic case. © 1997 John Wiley & Sons, Inc. Naval Research Logistics 44: 639–654, 1997     

基于可拓方法的C3I作战方案生成与评价

作战指挥决策支持系统是指挥自动化系统的重要组成部分,作战方案生成与评价是作战指挥决策支持系统的基本功能.根据作战指挥决策支持系统特点将可拓方法应用于作战方案生成与评价,并分析了其优势所在.结合空战案例运用发散树方法进行作战方案集的开拓,并利用优度评价方法进行作战方案的评价,从而得到最佳作战方案.     

高炮群火力优化分配的指派模型

火力优化分配是高炮群指挥控制的关键环节。依据有严格理论证明和实用价值的指派问题及其解法(匈牙利法),构建了一对一射击和多对一射击情形下的高炮群火力优化分配的指派模型,探讨了该模型的求解,分析了该模型的实际应用,并通过具体实例对该模型进行了初步验证。该模型的解法被证明是多项式时间算法,满足作战实时性要求。实际应用表明该模型用于解决高炮群的火力分配问题是有效的。