Numerical simulation of the blast wave of a multilayer composite charge

The numerical simulation of a blast wave of a multilayer composite charge is investigated. A calculation model of the near-field explosion and far-field propagation of the shock wave of a composite charge is established using the AUTODYN finite element program. Results of the near-field and far-field calculations of the shock wave respectively converge at cell sizes of 0.25–0.5 cm and 1–3 cm. The Euler––flux-corrected transport solver is found to be suitable for the far-field calculation after mapping. A numerical simulation is conducted to study the formation, propagation, and interaction of the shock wave of the composite charge for different initiation modes. It is found that the initiation mode obviously affects the shock-wave waveform and pressure distribution of the composite charge. Additionally, it is found that the area of the overpressure distribution is greatest for internal and external simultaneous initiation, and the peak pressure of the shock wave exponentially decays, fitting the calculation formula of the peak overpressure attenuation under different initiation modes, which is obtained and verified by experiment. The difference between numerical and experimental results is less than 10%, and the peak overpressure of both internal and external initiation is 56.12% higher than that of central single-point initiation.     

Aerodynamics analysis of a hypersonic electromagnetic gun launched projectile

A hypersonic aerodynamics analysis of an electromagnetic gun (EM gun) launched projectile configuration is undertaken in order to ameliorate the basic aerodynamic characteristics in comparison with the regular projectile layout. Static margin and pendulum motion analysis models have been applied to evaluate the flight stability of a new airframe configuration. With a steady state computational fluid dynamics (CFD) simulation, the basic density, pressure and velocity contours of the EM gun projectile flow field at Mach number 5.0, 6.0 and 7.0 (angle of attack = 0°) have been analyzed. Furthermore, the static margin values are enhanced dramatically for the EM gun projectile with configuration optimization. Drag, lift and pitch property variations are all illustrated with the changes of Mach number and angle of attack. A particle ballistic calculation was completed for the pendulum analysis. The results show that the configuration optimized projectile, launched from the EM gun at Mach number 5.0 to 7.0, acts in a much more stable way than the projectiles with regular aerodynamic layout.     

A novel facial emotion recognition scheme based on graph mining

Recent years have seen an explosion in graph data from a variety of scientific, social and technological fields. From these fields, emotion recognition is an interesting research area because it finds many applications in real life such as in effective social robotics to increase the interactivity of the robot with human, driver safety during driving, pain monitoring during surgery etc. A novel facial emotion recognition based on graph mining has been proposed in this paper to make a paradigm shift in the way of representing the face region, where the face region is represented as a graph of nodes and edges and the gSpan frequent sub-graphs mining algorithm is used to find the frequent sub-structures in the graph database of each emotion. To reduce the number of generated sub-graphs, overlap ratio metric is utilized for this purpose. After encoding the final selected sub-graphs, binary classification is then applied to classify the emotion of the queried input facial image using six levels of classification. Binary cat swarm intelligence is applied within each level of classification to select proper sub-graphs that give the highest accuracy in that level. Different experiments have been conducted using Surrey Audio-Visual Expressed Emotion (SAVEE) database and the final system accuracy was 90.00%. The results show significant accuracy improvements (about 2%) by the proposed system in comparison to current published works in SAVEE database.     

Analysis of the stress wave and rarefaction wave produced by hypervelocity impact of sphere onto thin plate

Shock wave is emitted into the plate and sphere when a sphere hypervelocity impacts onto a thin plate. The fragmentation and phase change of the material caused by the propagation and unloading of shock wave could result in the formation of debris cloud eventually. Propagation models are deduced based on one-dimensional shock wave theory and the geometry of sphere, which uses elliptic equations (corresponding to ellipsoid equations in physical space) to describe the propagation of shock wave and the rarefaction wave. The “Effective thickness” is defined as the critical plate thickness that ensures the rarefaction wave overtake the shock wave at the back of the sphere. The “Effective thickness” is directly related to the form of the debris cloud. The relation of the “Effective thickness” and the “Optimum thickness” is also discussed. The impacts of Al spheres onto Al plates are simulated within SPH to verify the propagation models and associated theories. The results show that the wave fronts predicted by the propagation models are closer to the simulation result at higher impact velocity. The curvatures of the wave fronts decrease with the increase of impact velocities. The predicted “Effective thickness” is consistent with the simulation results. The analysis about the shock wave propagation and unloading in this paper can provide a new sight and inspiration for the quantitative study of hypervelocity impact and space debris protection.     

扩张状态观测器的观测误差前馈补偿设计

在"总和"扰动模型未知的前提下,针对线性扩张状态观测器跟踪时变信号精度不高的问题,设计出一种前馈观测补偿器。在分析线性扩张状态观测器观测原理的基础上,通过对扰动项的线性近似、误差系统动态响应的忽略,在时域内推导出观测静差的量化表达式,进而使用扰动微分项的估计值替代真值对观测作前馈补偿。理论分析了替代的可行性,证明了补偿器减小观测误差幅值、超前校正观测相位滞后的作用。将这一补偿思想推广至非线性扩张状态观测器中。通过仿真对补偿器提高观测精度、加快误差收敛的有效性进行检验,实验结果进一步表明,补偿器的引入能显著提高整个自抗扰控制系统的控制精度,从而证明了这种补偿思路的可行性。     

伺服电机积分型SMC速度控制策略

为解决伺服电机控制系统输出转速可控性差、波动大、动态响应慢等问题,提出积分型滑模变结构控制策略,设计负载转矩观测器解决控制过程中的负载扰动问题,基于Simulink搭建永磁同步电机速度控制系统仿真模型,搭建电机测试系统台架对控制系统的稳态性能和动态性能进行试验验证。研究结果表明,相比于传统比例积分微分控制和普通滑模变结构控制(Sliding Mode variable structure Control, SMC),所设计的控制策略能够使控制系统达到稳态时速度波动较小,鲁棒性较好,抑制了SMC的抖振现象。     

针对不同视场辅助信标的无人机目标定位方法

针对无人机在单站测角测距的目标定位过程中受无人机姿态角误差影响较大的问题,提出一种对辅助信标进行探测并与惯性传感器相结合的无人机姿态求解方法。建立基于容积卡尔曼滤波的惯性传感器姿态求解模型,采用梯度下降法对基于辅助信标的无人机位姿参数进行求解,并综合它们的结果对无人机的姿态偏差进行估计和校正,最后完成了不同视场条件下的目标定位和仿真计算。结果表明,所提方法对无人机目标定位精度有明显提高。     

The stability of the nuclear nonproliferation norm: a critique of norm-contestation theory

This article argues that the nuclear nonproliferation norm (NNPN) is a social fact with a relatively independent life of its own and that it has a powerful impact on the behavior of both nuclear-weapon states (NWS) and non-nuclear-weapon states (NNWS). It challenges the application of critical constructivist research on norms to the NNPN and the idea that its legitimacy and structural power depend on contestation “all the way down.” State and non-state actors play an important role in explaining the dynamics of the NNPN, but agential constructivism runs the danger of “throwing the baby out with the bath water,” neglecting the structural impact of the NNPN on state behavior. The article examines the limitations of norm-contestation theory, arguing that some norms are more resistant to contestation than others. The NNPN is more difficult to contest than new norms (such as the Responsibility to Protect) because it is rooted in fifty years of nonproliferation nuclear diplomacy. The US-India nuclear deal is not a case of “norm change” but a violation of the NNPN. The “core” of the NNPN has not changed since the US-India nuclear deal. The conflict confronting NWS and NNWS is about the implementation of “type 2” norms (organizing principles) and “type 3” norms (standardized procedures), and not about the “hard core” of the NNPN.     

Mirror,mirror on the wall,who is the most offensive of them all? – Explaining the offensive bias in military tactical thinking

This article explores why the offensive predominates military tactical thinking. With survey results showing an offensive bias among 60 per cent of senior Swedish officers and as many as 80 per cent in the case of the army, it is clear that this is not just a problem of the past but is equally relevant today. The article asks why there is a tendency to perceive and understand offensive tactics as the preferred choice and the way to conduct battle that should be encouraged and preferred. Drawing on existing research and the findings of a pilot study, ten propositions for why the offensive bias exists are tested using a mixed-method approach. Based on the findings, the article develops a model to understand why the offensive dominates military tactical thinking. It is found that the two key constitutive factors behind the offensive bias are military culture and education. These factors most directly and profoundly influence an officer’s identity, perceptions, and thinking. Military culture and education, in turn, work as a prism for four other factors: military history, the theory and principles of war, doctrine and TTPs, and psychological factors.     

采用遗传算法的弹托迎风窝结构设计

针对一体化弹丸弹托易分离性和轻质化的设计要求,构建弹托迎风窝参数化外形模型,基于激波和膨胀波理论建立弹托气动力计算模型;以弹托分离加速度和弹托质量综合最优为目标函数,采用遗传算法对弹托迎风窝的外形参数进行优化设计,从而得到弹托迎风窝的优化外形。以中口径尾翼稳定脱壳穿甲弹的弹托设计为例,采用提出的优化设计模型对其迎风窝结构进行优化设计,并采用基于动网格技术的弹托分离仿真模型验证其最优性。仿真结果表明：所提优化模型能够得到最优的弹托迎风窝结构;针对现有的中口径尾翼稳定脱壳穿甲弹,可进一步对其弹托结构进行优化,以提高其分离快速性。