拉压异性材料楔体的极限载荷分析

利用莫尔屈服准则,对一侧承受均布垂直载荷作用的拉压异性材料楔体进行了极限载荷分析。计算结果表明,考虑了材料的拉压异性影响,楔体承受的极限载荷有明显提高。     

带噪声的 AR 模型的参数估计及定阶

本文讨论了带噪声情形下 AR 模型的参数估计及定阶问题,还给出了噪声模型的参数估计,并证明了它们的强相容性。     

单片可编程数字信号处理器(DSP)在控制领域的应用趋势

分析了单片可编程数字信号处理器的特性,并着重同普通微处理器、微控制器作了结构及性能上的比较。介绍了现有的DSP 并预测了DSP 在控制领域中的应用趋势。     

基于软件无线电的DS/SS载频跟踪方法

扩频序列的精确同步是接收机正确解扩的关键问题。提出一种基于软件无线电技术,对DS/SS载频偏移量实现快速跟踪的数值算法,并讨论了实现步骤及估计性能。该算法具有三个优点:(1)可消除载频初始相位的影响。(2)适于极低信噪比条件下的载波跟踪。(3)算法简便,易于实现。仿真及实验均验证了此算法的可行性。     

红外图像序列运动小目标检测的预处理算法研究

就如何检测复杂背景下低信噪比的运动小目标展开讨论,提出了用空间高通滤波方法改善图像质量,达到抑制背景噪声,增强小目标的效果,随后用似然比检测理论进行目标的初步分离,接着采用邻域判决的方法实现运动目标的进一步分离,最后用图像流分析法进行目标的最终检测。实验结果表明,该算法能够对小目标甚至是点目标的运动进行可靠的检测     

集成平台空域辅助阵列共址干扰抑制技术

针对同时存在恶意干扰与非法窃听的通信环境,提出一种协作干扰(cooperative jamming, CJ)掩护的保密通信架构,收发信机之间采用跳频技术躲避恶意干扰,并采用协作干扰技术阻塞非法窃听。但该架构的通信带宽较大,会在收发频率振荡器中引起显著的同相和正交(in-phase and quadrature, IQ)通道失衡。鉴于此,对收发IQ通道失衡引起的信号失真进行数学建模,给出接收机处信干噪比的数学表达式,并给出干扰抑制比的闭合表达式。仿真结果表明,收发IQ通道失衡引起的信号失真的功率远大于热噪声功率。随着收发IQ通道失衡加剧,所提架构的信干噪比和干扰抑制比性能均会急剧下降,当幅度和相位失衡分别达到0.95和π/50时,信干噪比和干扰抑制比均损失了47 dB。     

基于磁通门/GPS组合的车辆导航系统滤波技术

给出了基于磁通门/GPS组合导航系统的硬件结构图,并应用卡尔曼滤波和方差自适应滤波算法分别对GPS、磁通门单独导航定位系统进行了分散滤波,最后应用联合卡尔曼滤波器对GPS和磁通门信息进行了信息融合.并且通过实际跑车实验,验证了滤波对导航系统随机误差消除和定位精度提高的有效性.     

Numerical investigation of dynamic interaction with projectile and harmonic behaviour for T-finned machine gun barrels

Machine gun barrels differ from their rifle counterparts in terms of profile. To support high rates of sustained fire, machine gun barrels are made thicker in order to dissipate more heat and maintain their flexural rigidity and thus accuracy, but on other hand they also contribute in weight addition to weapon. This investigation deals with comparison between a conventional machine gun barrel and an improved innovative design having T-fins, both having same weight and chambered in 5.56 × 45 NATO ammunition, to compare their structural and harmonic characteristics which were parameterized by factors such as modal spectrum, directional deformation at muzzle ends during a single shot fire and harmonic behaviour at corresponding range of exciting frequencies. The solid models of both the barrels having same weight, were created using Solidworks. The continuous input data functions were generated by MATLAB using the field tested discreet data points. The generated velocity-distance functions were converted into time dependent functions using integration algorithms to calculate transient parameters such as time steps, excitation frequency range, angle of rotation of projectile and its angular velocity. The dynamic condition simulated the varying nature of forces due to eccentricity in projectile and this data was fed to a time step study using ANSYS transient structural work bench followed by modal and harmonic analysis. The results showed a significant reduction in muzzle end deformation which thus proved that the T-finned barrel, although had same weight as that of the conventional one, but had better structural and harmonic characteristics, and hence it would inherit better firing accuracy.     

四支板超声速引射器性能特性试验

对二维喷管构型的四支板超声速引射器进行冷流试验,分析启动、负载匹配方面的性能特性。试验结果表明:启动特性方面,四支板超声速引射系统的盲腔压力低于3 kPa,引射器入口腔压的迟滞压力比启动压力低15.9%。负载匹配特性方面,四支板引射器在小引射系数、大增压比状态下具有十分明显的优势,当引射系数为0.04时,增压比为11.21;当引射系数为0.10时,增压比为7.0。因此,二维喷管构型的多支板超声速引射器具有良好的启动、负载匹配性能,工程应用潜力较大。     

月球轨道超长波天文观测微卫星在轨数据预处理方法

围绕“嫦娥4号”月球轨道超长波天文观测微卫星展开研究,针对微纳卫星对地数传资源的限制,提出一种在轨信号预处理方法：通过10通道数字下变频链路实现原始数据的变频接收,再利用多级滤波器抽取获得低采样率基带数据,下变频本振频率可调,在对地数传资源约束下保证了不同频带数据的灵活选取。以上方法实现了一种10频点超窄带梳状滤波,仿真验证表明,采样率80 MSPS基带带宽为1 kHz的情况下,此方法可在现场可编程门阵列平台上稳定运行,能保证带内平坦度和线性相位等关键技术指标, 数据量与直接下传原始数据相比,降低了3个数量级以上。