飞行控制软件导航仿真模型遥测数据注入仿真

研究了飞行控制软件导航仿真模型遥测数据注入仿真中的一些问题,构造了遥测数据输入序列的误差补偿算法,重建相应的输入序列,使得将它们注入到相应的数字仿真模型进行仿真时,得到的输出与飞行试验中弹上计算机发送的遥测数据相符。     

机动目标建模及机动检测算法

为解决机动目标跟踪问题,建立了非机动(匀速直线运动)和机动目标当前统计两种动态模型,并对机动目标当前统计模型的输入控制的估计进行了适当改进.同时对非机动模型的观测残差和机动模型的输入估计进行检验,以便准确检测目标机动.     

Pairwise model discrimination with applications in lifetime distributions and degradation processes

Reliability data obtained from life tests and degradation tests have been extensively used for purposes such as estimating product reliability and predicting warranty costs. When there is more than one candidate model, an important task is to discriminate between the models. In the literature, the model discrimination was often treated as a hypothesis test and a pairwise model discrimination procedure was carried out. Because the null distribution of the test statistic is unavailable in most cases, the large sample approximation and the bootstrap were frequently used to find the acceptance region of the test. Although these two methods are asymptotically accurate, their performance in terms of size and power is not satisfactory in small sample size. To enhance the small‐sample performance, we propose a new method to approximate the null distribution, which builds on the idea of generalized pivots. Conventionally, the generalized pivots were often used for interval estimation of a certain parameter or function of parameters in presence of nuisance parameters. In this study, we further extend the idea of generalized pivots to find the acceptance region of the model discrimination test. Through extensive simulations, we show that the proposed method performs better than the existing methods in discriminating between two lifetime distributions or two degradation models over a wide range of sample sizes. Two real examples are used to illustrate the proposed methods.     

高效率机动部署航空武器靶场关键技术和应用

为用户设计了一个航空武器试验靶场,具备空空、空地和地空导弹试验能力,可机动部署,具有易于运行和运维代价低的特点。靶场由载机遥测系统、测量雷达、光电跟踪系统、微波和光纤通信系统、靶机遥测站、指挥控制等6个子系统构成;指挥控制子系统之外的5个子系统均使用国产成熟产品。在总体方案和指挥控制子系统设计中,对互联集成方案、机动部署、试验航线设计和发布、自动化领航、自动化指挥决策等5项关键技术进行了着重优化。在实际应用中,全靶场运行仅需20多成员(不含飞行和机场机务人员),3天内完成新试验场部署和联调,对作战部队飞行员进行5架次航线训练后即进行实弹试验,2天内完成多发中程拦截和近距格斗空空导弹试验。     

采用正交分集的灵巧噪声干扰对抗方法

针对数字射频存储干扰机多通道宽带转发模式下的灵巧噪声干扰,提出了基于混沌调制信号、多谐波相位调制线性调频信号的正交分集抗干扰方法。混沌调制信号与多谐波相位调制线性调频信号具有"图钉"形模糊函数,除了具有良好的距离、多普勒分辨力,还对回波频率敏感,通过正交分集设计,能够更好地适应宽带转发灵巧噪声干扰。通过计算机仿真对新方法的抗干扰性能进行了分析和验证,结果表明:在多通道宽带转发灵巧噪声干扰环境下,新方法的抗干扰改善因子能够达到10 d B以上,抗干扰性能明显优于传统的频率捷变、斜率捷变方法。     

星箭分离相对位姿摄影测量方法

提出一种基于视觉的星箭分离相对位姿测量方法。在相机内参数已知的情况下,将相机安装于运载火箭,并在卫星上固连不少于6个合作标志,利用相机对合作标志实时成像;基于单目位姿估计的基本原理,采用高效n点渗透与正交迭代结合的方式解算卫星与火箭之间的相对位姿关系。仿真实验结果、半实物仿真实验结果证明了所提测量方法的可行性和准确性。     

Parametric study of single confined fragment launch explosive device

In this article, parametric study of single confined fragment launch device was carried out. The configuration proposed was further studied to derive the empirical relationship for effect of fragment size, charge size, confinement thickness on fragment velocity. The simulations were carried out using ANSYS-AUTODYNE explicit solver. Fragment velocities were estimated as a function of different parametric combinations of explosive quantities, charge length to diameter ratio, fragment height to diameter ratio, confinement thickness, fragment material and fragment mass. The data was further converted to charge to metal ratio under fragment and confinement. It was observed that, increase in confinement thickness, charge quantity and decrease in fragment height increases the fragment velocity. It is also noted that, charge to metal mass ratio under fragment significantly affects the fragment velocity. At the end, an empirical relationship for fragment velocity interms of all these parameters was established. Using these relations, two velocities 1831.92 m/s and 2523.9 m/s required for NATO STANAG 4496 IM test were estimated. The design parameters for these velocities are presented. Also, the results estimated using the empirical relationship has been compared with published experimental data. Error in the predicted velocities is within the acceptable range. The empirical relationship proposed will be useful for finalization of design of the fragment launch device.     

利用过阻尼电路合成高压方波脉冲

在过阻尼RLC电路分时放电的基础上,提出新型高压方波脉冲产生方法。理论分析表明:过阻尼RLC电路产生的双指数电压波与脉冲形成线产生的方形电压波具有类似的上升沿和平顶。电路模拟表明:通过人工过零技术可以对双指数电压波进行截尾,从而形成完整的高压方波脉冲。建立了原理验证性样机,由两组RLC电路构成,每组电路包含一台脉冲电容器和一只三电极场畸变气体开关,两组电路共用一个上升沿调节电感。实验证明:样机可以在电阻负载上输出幅值为17 kV、平顶宽度为330 ns～5.8μs、上升沿为100～350 ns的单极性高压方波脉冲。该方法适应性强,对负载变化不敏感,同时具有良好的可调节性,方波上升沿、平顶宽度连续独立可调。     

PMI泡沫夹层结构雷达天线罩间接热-结构耦合分析与实验研究

机载PMI泡沫夹层结构雷达天线罩在环境温度变化时将产生表面变形现象并影响其使用性能,但对天线罩热变形结果进行实时检测分析具有一定难度。通过ANSYS间接热-结构耦合法建立了分析模型,对天线罩进行了计算分析,采用热膨胀片状模型进行了理论分析,在此基础上,设计并开展了温度冲击实验研究。结果表明, PMI夹层结构天线罩的热-结构耦合变形综合应变趋势是棱边处膨胀程度最大,由边缘至天线罩透波面中心处,膨胀程度逐渐减小;间接热-结构耦合计算应变值与实测应变值之间平均相差35.08%,间接热-结构耦合分析方法与模型具有一定的可信性。     

利用RLC电路合成高压方波脉冲

基于过阻尼RLC电路分时放电,提出了一种新型高压方波脉冲产生方法。理论分析表明过阻尼RLC电路产生的双指数电压波与PFL产生的方形电压波具有类似的上升沿和平顶。电路模拟表明通过人工过零技术可以对双指数电压波进行截尾,从而形成完整的高压方波脉冲。建立了原理验证性样机,由两组RLC电路构成,每组电路包含一台400 nF脉冲电容器和一只三电极场畸变气体开关,两组电路共用一个上升沿调节电感。实验证明样机可以在250 Ω电阻负载上输出幅值17 kV,平顶宽度330 ns~5.8 μs,上升沿100~ 350 ns 的单极性高压方波脉冲。该方法适应性强,对负载变化不敏感,同时具有良好的可调节性,方波上升沿、平顶宽度连续独立可调。