Analysis of down times of jib cranes—A stochastic approach

In this paper a case study dealing with the maintenance problem of jib cranes is presented. A jib crane is viewed as a complex system whose performance is observed as a single realization over period of time. After pointing out limitations of existing stochastic models to analyze the observed realization a new family of bivariate stochastic processes is introduced. The data of jib crane is analyzed using new model and cross‐validated using part of the data set. It is noted that the new family of stochastic processes is useful to analyze bivariate data where one of the variables is finitely valued and the other is nonnegative and continuous. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 231–243, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10006     

并联TBCC动力对高超声速飞行器性能的影响

针对马赫数为6的一级高超声速巡航飞行器的动力需求,提出涡轮/亚燃冲压/双模态超燃冲压组合动力（T/RJ/DMSJ）和射流预冷涡轮/亚燃冲压/双模态超燃冲压组合动力(PCT/RJ/DMSJ)两种方案。在给定的飞行任务下,分析起飞推重比分别为0.8和1.0时,飞行器完成任务时的航程和飞行时间,并对比了PCT/RJ/DMSJ在两种工作模态下的性能。研究结果表明：在相同的起飞推重比下,两种组合动力方案的航程和飞行时间相差不大。当起飞推重比为0.8时,采用PCT/RJ/DMSJ组合动力方案比T/RJ/DMSJ组合动力方案的航程高出3.6%,飞行时间高出3.8%;当起飞推重比为1.0时,PCT/RJ/DMSJ的航程和飞行时间比T/RJ/DMSJ的分别高出4.6%和4.8%。在小推重比下,跨声速段的燃料消耗和飞行时间占整个加速爬升段的比例较大,随着推重比的增加,这个比例减小,巡航可用的燃料比例增大,巡航距离增加,提高起飞推重比可以提高超声速飞行器的航程并缩短飞行时间。     

基于模糊基函数网络的机械臂免模型输出反馈PD控制

针对无速度信息的机械臂轨迹跟踪控制问题,提出了一种带观测器的机械臂免模型模糊基函数网络输出反馈PD控制。所设计的模糊基函数网络被用来估计关节速度,并同时用来补偿系统的未知不确定。网络的权值及参数调整采用混合算法,且能够在线自适应实时调整,不需要离线学习阶段。所提出的观测器及控制器均不需要任何的机械臂动态模型(包括惯性矩阵逆),并通过引入PD控制使整个方案更易工程实现。基于Lyapunov理论证明了整个闭环系统一致最终有界。两关节机械臂试验结果进一步证明了这种基于观测器的反馈控制算法的有效性。     

Dynamic signatures and their use in comparing the reliability of new and used systems

The signature of a system with independent and identically distributed (i.i.d.) component lifetimes is a vector whose ith element is the probability that the ith component failure is fatal to the system. System signatures have been found to be quite useful tools in the study and comparison of engineered systems. In this article, the theory of system signatures is extended to versions of signatures applicable in dynamic reliability settings. It is shown that, when a working used system is inspected at time t and it is noted that precisely k failures have occurred, the vector s [0,1]^n‐k whose jth element is the probability that the (k + j)th component failure is fatal to the system, for j = 1,2,2026;,n ‐ k, is a distribution‐free measure of the design of the residual system. Next, known representation and preservation theorems for system signatures are generalized to dynamic versions. Two additional applications of dynamic signatures are studied in detail. The well‐known “new better than used” (NBU) property of aging systems is extended to a uniform (UNBU) version, which compares systems when new and when used, conditional on the known number of failures. Sufficient conditions are given for a system to have the UNBU property. The application of dynamic signatures to the engineering practice of “burn‐in” is also treated. Specifically, we consider the comparison of new systems with working used systems burned‐in to a given ordered component failure time. In a reliability economics framework, we illustrate how one might compare a new system to one successfully burned‐in to the kth component failure, and we identify circumstances in which burn‐in is inferior (or is superior) to the fielding of a new system. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009     

离子束加工误差对散射损失的影响研究

离子束加工(Ion Beam Figuring,IBF)去除函数对加工残差具有重要的影响,而加工残差引起的表面散射则导致光学性能发生变化.为了减小加工残差对光学性能的影响,利用基于CCOS成形原理的离子束加工仿真程序对光学镜面进行修形,分析不同去除函数宽度对散射损失(Ratio of Scattering Loss,RSL)指标的影响.通过研究可知,随着去除函数宽度的减小,加工残差对散射损失的影响越来越小.因此,根据加工残差对RSL指标的影响程度以及RSL指标要求,可以合理选择去除函数宽度,从而在满足面形精度的同时,优化加工工艺.     

滑翔增程弹滑翔弹道优化设计分析

针对鸭式布局的滑翔增程弹,建立了滑翔增程弹滑翔弹道的模型,采用使滑翔弹道上每一点的升阻比最大的设计思想进行弹道优化设计,导出了俯仰舵偏角与平衡攻角的表达式,并对滑翔飞行弹道特性进行了仿真计算分析.仿真计算表明,滑翔弹道与常规弹道降弧段相比下降趋缓,增程效果显著.     

斜入射条件下F-P干涉腔透过率特性分析

分析了斜入射角条件下F-P干涉腔的透过率特性;结合单层介质膜和单层金属膜的反射特性随入射角的变化规律,得出了反射特性参数为恒定值时微腔、低反F-P干涉腔透过率的计算误差;仿真结果表明,在光束斜入射条件下,特别是在大入射角下,单层介质膜的反射率指数增大,单层金属膜的反射率和反射相移也指数增大,但其吸收系数指数减小,造成微腔、低反F-P干涉腔透过率曲线与反射特性参数为恒定值时相比均明显向下偏移,且偏移量逐渐增大。     

脉冲高电压的频率对电容分压器性能的影响

研制了一种测量脉冲高电压的电容分压器,从理论和实验两个方面分析了高电压脉冲的频率对电容分压器分压比的影响。并用此电容分压器测量了Tesla变压器型强流电子束加速器的谐振特性波形,测量结果与理论分析一致。     

一种大规模数字I/O通道的扩展方法

针对控制系统中普通数字I/O卡的通道数无法满足大规模数字I/O要求的问题,提出一种数字I/O通道扩展方案,并设计了一种32路光电隔离多通道数字I/O板,通过一个简单实例说明了这种扩展方案的具体实施,并证实其有效性.     

等效载噪比评估全球导航卫星系统接收机误码率的适应性分析

等效载噪比是全球导航卫星系统接收机捕获、数据解调和跟踪性能的重要指标。近年来,研究人员取得大量以等效载噪比为指标的干扰影响分析研究成果,但鲜有等效载噪比适应性分析。为此,展开等效载噪比适应性研究。在推导单频干扰下接收机等效载噪比和误码率模型基础上,得出特定条件下等效载噪比评估数据解调性能失效的结论。同时,深入分析等效载噪比失效的机理,给出等效载噪比指标的适用条件。仿真实验验证了理论分析的正确性。