并联TBCC动力对高超声速飞行器性能的影响

针对马赫数为6的一级高超声速巡航飞行器的动力需求,提出涡轮/亚燃冲压/双模态超燃冲压组合动力（T/RJ/DMSJ）和射流预冷涡轮/亚燃冲压/双模态超燃冲压组合动力(PCT/RJ/DMSJ)两种方案。在给定的飞行任务下,分析起飞推重比分别为0.8和1.0时,飞行器完成任务时的航程和飞行时间,并对比了PCT/RJ/DMSJ在两种工作模态下的性能。研究结果表明：在相同的起飞推重比下,两种组合动力方案的航程和飞行时间相差不大。当起飞推重比为0.8时,采用PCT/RJ/DMSJ组合动力方案比T/RJ/DMSJ组合动力方案的航程高出3.6%,飞行时间高出3.8%;当起飞推重比为1.0时,PCT/RJ/DMSJ的航程和飞行时间比T/RJ/DMSJ的分别高出4.6%和4.8%。在小推重比下,跨声速段的燃料消耗和飞行时间占整个加速爬升段的比例较大,随着推重比的增加,这个比例减小,巡航可用的燃料比例增大,巡航距离增加,提高起飞推重比可以提高超声速飞行器的航程并缩短飞行时间。     

Dynamic signatures and their use in comparing the reliability of new and used systems

The signature of a system with independent and identically distributed (i.i.d.) component lifetimes is a vector whose ith element is the probability that the ith component failure is fatal to the system. System signatures have been found to be quite useful tools in the study and comparison of engineered systems. In this article, the theory of system signatures is extended to versions of signatures applicable in dynamic reliability settings. It is shown that, when a working used system is inspected at time t and it is noted that precisely k failures have occurred, the vector s [0,1]^n‐k whose jth element is the probability that the (k + j)th component failure is fatal to the system, for j = 1,2,2026;,n ‐ k, is a distribution‐free measure of the design of the residual system. Next, known representation and preservation theorems for system signatures are generalized to dynamic versions. Two additional applications of dynamic signatures are studied in detail. The well‐known “new better than used” (NBU) property of aging systems is extended to a uniform (UNBU) version, which compares systems when new and when used, conditional on the known number of failures. Sufficient conditions are given for a system to have the UNBU property. The application of dynamic signatures to the engineering practice of “burn‐in” is also treated. Specifically, we consider the comparison of new systems with working used systems burned‐in to a given ordered component failure time. In a reliability economics framework, we illustrate how one might compare a new system to one successfully burned‐in to the kth component failure, and we identify circumstances in which burn‐in is inferior (or is superior) to the fielding of a new system. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009     

离子束加工误差对散射损失的影响研究

离子束加工(Ion Beam Figuring,IBF)去除函数对加工残差具有重要的影响,而加工残差引起的表面散射则导致光学性能发生变化.为了减小加工残差对光学性能的影响,利用基于CCOS成形原理的离子束加工仿真程序对光学镜面进行修形,分析不同去除函数宽度对散射损失(Ratio of Scattering Loss,RSL)指标的影响.通过研究可知,随着去除函数宽度的减小,加工残差对散射损失的影响越来越小.因此,根据加工残差对RSL指标的影响程度以及RSL指标要求,可以合理选择去除函数宽度,从而在满足面形精度的同时,优化加工工艺.     

滑翔增程弹滑翔弹道优化设计分析

针对鸭式布局的滑翔增程弹,建立了滑翔增程弹滑翔弹道的模型,采用使滑翔弹道上每一点的升阻比最大的设计思想进行弹道优化设计,导出了俯仰舵偏角与平衡攻角的表达式,并对滑翔飞行弹道特性进行了仿真计算分析.仿真计算表明,滑翔弹道与常规弹道降弧段相比下降趋缓,增程效果显著.     

斜入射条件下F-P干涉腔透过率特性分析

分析了斜入射角条件下F-P干涉腔的透过率特性;结合单层介质膜和单层金属膜的反射特性随入射角的变化规律,得出了反射特性参数为恒定值时微腔、低反F-P干涉腔透过率的计算误差;仿真结果表明,在光束斜入射条件下,特别是在大入射角下,单层介质膜的反射率指数增大,单层金属膜的反射率和反射相移也指数增大,但其吸收系数指数减小,造成微腔、低反F-P干涉腔透过率曲线与反射特性参数为恒定值时相比均明显向下偏移,且偏移量逐渐增大。     

脉冲高电压的频率对电容分压器性能的影响

研制了一种测量脉冲高电压的电容分压器,从理论和实验两个方面分析了高电压脉冲的频率对电容分压器分压比的影响。并用此电容分压器测量了Tesla变压器型强流电子束加速器的谐振特性波形,测量结果与理论分析一致。     

等效载噪比评估全球导航卫星系统接收机误码率的适应性分析

等效载噪比是全球导航卫星系统接收机捕获、数据解调和跟踪性能的重要指标。近年来,研究人员取得大量以等效载噪比为指标的干扰影响分析研究成果,但鲜有等效载噪比适应性分析。为此,展开等效载噪比适应性研究。在推导单频干扰下接收机等效载噪比和误码率模型基础上,得出特定条件下等效载噪比评估数据解调性能失效的结论。同时,深入分析等效载噪比失效的机理,给出等效载噪比指标的适用条件。仿真实验验证了理论分析的正确性。     

助推-滑翔飞行器可达区域影响因素研究

利用Radau伪谱法将连续的助推-滑翔飞行器轨迹优化问题转化为非线性规划问题,通过仿真得到了飞行器完整的可达区域,着重分析了升阻比、终端速度以及终端倾角对飞行器可达区域的影响.研究结果表明,可达区域呈现出类椭圆结构,其地理区域覆盖能力由助推火箭关机点速度决定;与终端倾角对飞行器可达区域的影响相比,飞行器升阻比特性和终端速度的影响相对较大.     

Allocation of two redundancies in two‐component series systems

The allocation of redundancies in a system to optimize the reliability of system performance is an interesting problem in reliability engineering and system security. In this article, we focus on the optimal allocation of two exponentially distributed active (standby) redundancies in a two‐component series system using the tool of stochastic ordering. For the case of active redundancy, stochastic comparisons are carried out in terms of the likelihood ratio and reversed hazard rate orders. For the case of standby redundancy, a likelihood ratio ordering result is developed. The results established here generalize and strengthen corresponding results in the recent literature. In addition, several numerical examples are used to explicate the results. © 2013 Wiley Periodicals, Inc. Naval Research Logistics, 2013     

一种基于节点资源利用率的无标度网络路由策略

本文研究了节点负载处理能力异质条件下的无标度网络交通动力学过程,提出了一种基于节点资源利用率的全局动态路由策略。该策略利用网络中节点资源利用率构建了一种全局代价函数,选择使该代价函数最小的路径来传输负载。实验结果表明该路由策略在略微增加平均路径长度的情况下成倍地提高了网络负载传输能力,与有效路由策略的比较进一步验证了该策略的有效性。