一种低成本多用途破甲弹近炸电路的设计

利用已有的米波多卜勒引信技术,设计了多用途破甲弹近炸引信信号处理电路。该电路利用近目标电信号幅度大、增幅速率快及幅度与距离的关系,实现对装甲目标的零炸高启动和抗干扰;利用多卜勒频率的变化特征实现对直升机射击的炸点自适应控制;利用双支路对消电路实现对地面目标的炸高稳定;利用可控开关完成对破甲弹多用途的选择。     

回转形薄壁零件砂带磨削的参数选择及精度控制

通过实验分析了带轮磨削过程中切削力和切削深度之间的关系,从提高切削效率和强度出发,选择优化切削参数,建立了切削参数数学模型;提出了控制回转形薄壁零件磨削精度的加工方法     

利用PB 6.0实现数据库动态查询

在分析关系数据库SQL查询语言原理的基础上,通过一个具体的例子介绍了如何利用PB6.0实现数据库动态查询.     

The joint signature of coherent systems

We investigate the joint signature of $m$ coherent systems, under the assumption that the components have independent and identically distributed lifetimes. The joint signature, for a particular ordering of failure times, is an $m$‐dimensional matrix depending solely on the composition of the systems and independent of the underlying distribution function of the component lifetimes. The elements of the $m$‐dimensional matrix are formulated based on the joint signatures of numerous series of parallel systems. The number of the joint signatures involved is an exponential function of the number of the minimal cut sets of each original system and may, therefore, be significantly large. We prove that although this number is typically large, a great number of the joint signatures are repeated, or removed by negative signs. We determine the maximum number of different joint signatures based on the number of systems and components. It is independent of the number of the minimal cut sets of each system and is polynomial in the number of components. Moreover, we consider all permutations of failure times and demonstrate that the results for one permutation can be of use for the others. Our theorems are applied to various examples. The main conclusion is that the joint signature can be computed much faster than expected.     

基于主动相位控制的脉冲激光相干合成技术

提出并验证了基于随机并行梯度下降(SPGD)算法的主动相位控制脉冲激光相干合成方案.利用低通滤波器滤除脉冲激光光强变化导致的性能评价函数起伏,提取出相位噪声导致的性能评价函数变化,然后将这个低通滤波后的性能评价函数用于SPGD算法的极值寻优过程,从而实现脉冲激光的锁相.对该方案进行了理论分析和数值模拟,并进行了两路脉冲激光相干合成实验.实验结果表明,当系统从闭环到开环时,系统性能评价函数均值提高到开环的1.6倍,干涉条纹长曝光对比度从0提高到0.43.在该方案中,通过增加合成脉冲激光路数,并在各路脉冲激光中引入多级功率放大器,能够得到更高的合成功率输出.     

Production scheduling with history‐dependent setup times

We consider a parallel‐machine scheduling problem with jobs that require setups. The duration of a setup does not depend only on the job just completed but on a number of preceding jobs. These setup times are referred to as history‐dependent. Such a scheduling problem is often encountered in the food processing industry as well as in other process industries. In our model, we consider two types of setup times—a regular setup time and a major setup time that becomes necessary after several “hard‐to‐clean” jobs have been processed on the same machine. We consider multiple objectives, including facility utilization, flexibility, number of major setups, and tardiness. We solve several special cases assuming predetermined job sequences and propose strongly polynomial time algorithms to determine the optimal timing of the major setups for given job sequences. We also extend our analysis to develop pseudopolynomial time algorithms for cases with additional objectives, including the total weighted completion time, the total weighted tardiness, and the weighted number of tardy jobs. © 2012 Wiley Periodicals, Inc. Naval Research Logistics, 2012     

基于人工嗅觉系统的油液渗漏检测方法

机电设备油液渗漏是一种典型的多发性故障,利用人工嗅觉技术对渗漏油液挥发气体进行测试从而进行故障诊断是一种新的无损检测方法。使用人工嗅觉系统对模拟柴油、齿轮油和机油渗漏产生的挥发气体进行检测,结果为三维数据阵列(样本×时间×传感器)。应用二维主成分分析法和三维平铺主成分分析法、平行因子分析方法对三种油液挥发气体样本进行分类,结果表明平行因子分析法由于利用了数据集的三维结构信息,所以分类效果更佳;应用主成分回归方法实现了机油挥发气体样本的定量确定,说明使用人工嗅觉系统实现设定阈值报警是可能的。     

一种面向复杂地理空间栅格数据处理算法并行化的任务调度方法

随着并行计算技术的成熟,地理空间栅格数据处理算法的并行化研究成为新的热点。聚焦于处理流程包含多个计算步骤的复杂地理空间栅格数据处理算法,基于空间计算域理论,提出了一个随着算法处理流程而动态变化的任务调度方法。实验证明,该方法在算法流程的每一个计算步都会调整任务分组方案,因此相比于传统任务调度方法,任务调度的负载均衡效果更好,并行算法程序的运行时间更短。     

一类新型制导站站测录取处理系统研制技术

现代地面制导系统都大量采用了计算机数字控制技术,针对某新型多功能、多通道照射制导雷达的技术特点,提出并实践了一种从制导站内部并行计算控制体系I/O线路录取并分解、处理所需参数,无需采样变换,即能满足站测录取处理要求的系统研制技术。     

子带阵列处理技术的导航抗干扰终端设计与实现

基于子带阵列处理技术的导航抗干扰终端要求多天线单元、多通道接收,这与信息化条件下军事需求的终端机动性强、体积小、重量轻是相矛盾的。为此提出了基于子带阵列处理的数字波速形成(DBF)抗干扰终端实现结构,满足DBF数字接收机系统实时性和抗干抗要求,同时可以灵活在资源消耗和传输速率间折衷考虑,并且易于在高速FPGA上实现。