无源雷达截获概率建模与窗口变量影响仿真

在截获概率概念和截获条件的基础上,综合时域、空域、频域等窗口函数构建截获概率模型,分别建立截获过程的4个窗口函数子模型,研究截获概率与窗口函数变量的影响关系。以SPS-48雷达为辐射源,仿真分析各窗口函数变量对截获概率的影响程度,讨论分区策略下无源雷达参数优化对截获概率的影响并总结截获概率提高方法,为无源雷达设计、研制、试验以及使用提供技术支撑。     

防空导弹指挥控制系统火力单元动态调整方法

多火力单元责任扇区的动态调整是防空导弹指挥控制系统的核心功能之一,通过引入可打击目标数和覆盖目标数的概念及计算方法,提出了一种新的多火力单元责任扇区调整方法。该方法能快速有效地确定多火力单元责任扇区调整方案。     

多子带雷达信号融合噪声抑制方法

全极点模型对信号构建线性模型,通过对模型进行定阶和计算可以得到估计信号的各个参数,从而实现信号预测。子带融合之前需要进行相干处理,可以通过相干函数等方式解决。root-MUSIC算法在低信噪比环境中极点选择并不稳健,会导致模型在阶数上判断错误。为解决全极点模型方法中子带融合在信噪比低时模型阶数估计不准的问题,提出一种噪声抑制方法。对信号Hankel矩阵的主对角奇异值矩阵加权处理,以消除噪声分量,并利用整体前向预测矩阵得到整体频段极点值与极点幅值,由此估计出低信噪比时的多子带融合信号。结果表明所提方法在仿真环境下,在信噪比-20 dB至10 dB时,相较于传统极点模型方案具有更好的估计结果。     

Driving force coordinated control of an 8 ×8 in-wheel motor drive vehicle with tire-road friction coefficient identification

Because of the complexities of tire-road interaction,the wheels of a multi-wheel distributed electric drive vehicle can easily slip under certain working conditions.As wheel slip affects the dynamic per-formance and stability of the vehicle,it is crucial to control it and coordinate the driving force.With this aim,this paper presents a driving force coordination control strategy with road identification for eight-wheeled electric vehicles equipped with an in-wheel motor for each wheel.In the proposed control strategy,the road identification module estimates tire-road forces using an unscented Kalman filter al-gorithm and recognizes the road adhesion coefficient by employing the recursive least-square method.According to road identification,the optimal slip ratio under the current driving condition is obtained,and a controller based on sliding mode control with a conditional integrator uses this value for accel-eration slip regulation.The anti-slip controller obtains the adjusting torque,which is integrated with the driver-command-based feedforward control torque to implement driving force coordination control.The results of hardware-in-loop simulation show that this control strategy can accurately estimate tire-road forces as well as the friction coefficient,and thus,can effectively fulfill the purpose of driving force coordinated control under different driving conditions.     

Optimization of process parameters of the activated tungsten inert gas welding for aspect ratio of UNS S32205 duplex stainless steel welds

The activated TIG (ATIG) welding process mainly focuses on increasing the depth of penetration and the reduction in the width of weld bead has not been paid much attention. The shape of a weld in terms of its width-to-depth ratio known as aspect ratio has a marked influence on its solidification cracking tendency. The major influencing ATIG welding parameters, such as electrode gap, travel speed, current and voltage, that aid in controlling the aspect ratio of DSS joints, must be optimized to obtain desirable aspect ratio for DSS joints. Hence in this study, the above parameters of ATIG welding for aspect ratio of ASTM/UNS S32205 DSS welds are optimized by using Taguchi orthogonal array (OA) experimental design and other statistical tools such as Analysis of Variance (ANOVA) and Pooled ANOVA techniques. The optimum process parameters are found to be 1 mm electrode gap, 130 mm/min travel speed, 140 A current and 12 V voltage. The aspect ratio and the ferrite content for the DSS joints fabricated using the optimized ATIG parameters are found to be well within the acceptable range and there is no macroscopically evident solidification cracking.     

一种鱼雷自导信号频率检测方法研究

靶场在进行智能鱼雷鉴定试验任务时,实时准确地检测出鱼雷自导信号的频率成分是靶标信号处理中的重要环节,谱线比值法便是靶标进行信号处理时检测信号频率的一种有效方法。本文介绍了谱线比值法的基本原理,针对目前鱼雷自导信号特点,对该方法提出了改进方案并进行了仿真。仿真结果表明,经改进的谱线比值法能够满足靶标检测复杂鱼雷自导信号体制下信号频率的使用要求。     

贯彻强军目标 创设良好思想政治工作环境

强军目标是新时期军队建设的行动纲领。思想政治建设必须围绕强军目标展开。军队思想政治工作受所处环境的影响和制约。贯彻强军目标创设良好的思想政治工作环境,首先要从本单位自身做起,建设净化优美的军营“小环境”,塑造军营环境的“奋斗之关”“陶冶之美”“形象之美”,增强思想政治工作环境的推动力、感染力和约束力。     

舰艇编队协同反导队形配置优化研究

随着舰艇编队网络中心作战模式的产生与发展,其队形配置问题必须重新给予考虑。首先介绍了网络化反导作战系统的远程数据作战能力;其后,从指挥通信、火力掩护和一次耦合杀伤区3个方面给出舰舰间距的约束条件,以远程数据作战条件下编队舰空导弹杀伤区增量最大为优化目标,建立编队舰舰间距优化模型,并在此基础上结合电子干扰的要求,给出了编队队列角的最优范围解算方法;最后,在一定的战场假设下,通过示例的方式对模型的有效性与适应性进行了验证。     

逆变器-异步电机电磁噪声的分析与研究

利用Ansoft建立了样机的二维模型,计算了样机在空载运行下的各性能参数,分析了样机内的磁场分布情况.在此基础上,计算了负载大小、机壳设计尺寸和逆变器供电对异步电机电磁噪声的影响.仿真分析表明:通过合理改变机壳尺寸和质量以及选择合适的逆变器开关频率的方法可实现异步电机的降噪.     

三相逆变器新型积分控制加状态反馈控制

三相逆变器在实际运行中,不平衡负载工况较为常见,原因是传统积分控制加状态反馈控制无法实现三相输出电压的对称性。针对该问题提出了不平衡负载条件下三相逆变器新型积分控制加状态反馈控制策略,并通过仿真和实验验证了该策略能有效降低不平衡负载时三相逆变器输出电压的不平衡度,从而获得对称的三相输出电压波形。