军队院校科研工作绩效评估探讨

阐述了军队院校科研工作绩效评估的目的、作用和内容等,讨论了军队院校科研工作绩效评估的基本方法,对开展军队院校科研工作绩效评估的相关问题进行了探讨.     

定常态不可逆卡诺热机面积特性

对定常态不可逆卡诺热机进行了有限时间热力学分析.定义了功率、效率和面积比系数,并导出三者的关系式,由此对热机最佳功率、效率和面积特性进行了分析和讨论,给出了一些有益的结论.     

高性能混凝土耐火性能及对策探讨

高性能混凝土与传统混凝土相比,结构密实,脆性更大,渗透性低,尤其是在火灾高温状态下发生爆裂现象因而造成其抗火性差。为此,提出在高性能混凝土中混掺聚丙烯纤维和钢纤维、外加减水剂及骨料两种技术措施,以提高高性能混凝土的耐火性能。     

基于强跟踪扩展Kalman滤波的X射线脉冲星导航定轨精度研究

为提高X射线脉冲星导航定轨精度,依据脉冲星导航原理,建立了X射线脉冲星自主导航系统的状态方程和观测方程,提出用强跟踪扩展Kalman滤波（Strong Tracking Extended Kalman Filter,STEKF）替代扩展Kalman滤波,并对3颗脉冲星卫星运行的位置和速度估计进行了仿真实验。仿真结果表明：STEKF具有使滤波器能够自适应地校正估计偏差并迅速跟踪状态变化的能力,有效地提高了卫星运动状态的估计精度和数值稳定性。     

元器件性能退化信息的系统性能可靠性评估

性能可靠性方法为解决现代工程实际中的高可靠、长寿命、小子样产品的可靠性建模分析提供了途径.目前的性能可靠性研究主要是针对元器件开展的,对系统性能可靠性进行研究时通常需要将其看作一个元器件,需要得到系统的性能退化数据,在某些情况下,得到系统的性能退化数据比较困难.实际上,由于元器件的性能退化导致系统性能的变化,因而可以利...     

动初级高速六相直线感应电机工作特性分析

为了准确刻画对象模型,采用一阶等效电路瞬态涡流分析法对动态边端效应影响下动初级高速六相直线感应电机的参数时变规律进行了定量计算,并通过感应涡流损耗推导得到考虑动态边端效应时电机的等效电路。基于此,通过电磁推力计算及效率评估对动态边端效应影响下电机的工作特性进行了详细分析。利用不同运行速度条件下的有限元仿真及动态实验验证了理论分析和推导的正确性。     

重力势能锁止型外骨骼设计及其效能评价

现存的被动式外骨骼存在助力效果不明显等缺陷。基于人体步态特征,提出了将人体行走过程中的重力势能转化为人体抬腿过程中动能的原理,通过弹簧、曲柄滑块机构、棘轮棘爪机构以及链传动机构的组合,设计了一款被动式下肢机械外骨骼,并通过外骨骼动力学分析和生理消耗指数实验测试的方法进行了外骨骼性能评价。动力学分析结果表明,穿戴外骨骼后髋关节峰力矩总量降低了23.43%,髋关节做功总量降低了30.59%,初步验证了外骨骼的有效性。生理消耗指数实验测试结果表明, 穿戴外骨骼对于短距离动作转换未产生显著效果,但在长距离行走和上坡行走中分别降低了8.1%和10.4%的能量消耗。因此,该下肢外骨骼助力性能得到了验证,为相关领域的研究提供了实例化参考。     

Numerical simulation study on penetration performance of depleted Uranium (DU) alloy fragments

Due to its high strength, high density, high hardness and good penetration capabilities, Depleted ura-nium alloys have already shined in armor-piercing projectiles. There should also be a lot of room for improvement in the application of fragment killing elements. Therefore, regarding the performance of the depleted uranium alloy to penetrate the target plate, further investigation is needed to analyze its advantages and disadvantages compared to tungsten alloy. To study the difference in penetration per-formance between depleted uranium alloy and tungsten alloy fragments,firstly, a theoretical analysis of the adiabatic shear sensitivity of DU and tungsten alloys was given from the perspective of material constitutive model. Then, taking the cylindrical fragment penetration target as the research object, the penetration process and velocity characteristics of the steel target plates penetrated by DU alloy frag-ment and tungsten alloy fragment were compared and analyzed, by using finite element software ANSYS/LS-DYNA and Lagrange algorithm. Lastly, the influence of different postures when impacting target and different fragment shapes on the penetration results is carried out in the research. The results show that in the penetration process of the DU and tungsten alloy fragments, the self-sharpening properties of the DU alloy can make the fragment head sharper and the penetrating ability enhance. Under the same conditions, the penetration capability of cylindrical fragment impacting target in vertical posture is better than that in horizontal posture, and the penetration capability of the spherical fragment is slightly better than that of cylindrical fragment.     

Defence and firm performance in the UK

The UK Ministry of Defence is British industry's largest single customer and a number of firms and industries are highly dependent on defence sales. Various hypotheses have been proposed about the impact of defence procurement on firms and these are investigated using four performance indicators: financial structure, investment, productivity and profitability. With regard to the borrowing ratio, capital investment and the rate of return, there is no statistically significant difference between the mean financial ratios for low and high dependence firms. However, non‐dependents appear to have a higher level and rate of growth of labour productivity than dependents.     

位置随动系统动态性能自动检测研究

通过分析某型位置随动系统的组成和动态技术指标,提出了位置随动系统动态性能自动检测的设计方案和测试方法,利用信号仿真模块和基于DSP的高速数据采集与处理模块,建立了自动检测的硬件电路和软件结构,确定了测试位置随动系统的动态性能指标、测试方法和软件功能,实现了对某型位置随动系统动态性能的自动检测．