Analysis on damage characteristics and detonation performance of solid rocket engine charge subjected to jet

To further explore the damage characteristics and impact response of the shaped charge to the solid rocket engine (SRE) in storage or transportation, protective armor was designed and the shelled charges model (SCM)/SRE with protective armor impacting by shaped charge tests were conducted. Air overpressures at 5 locations and axial acceleration caused by the explosion were measured, and the experimental results were compared with two air overpressure curves of propellant detonation obtained by related scholars. Afterwards, the finite element software AUTODYN was used to simulate the SCM impacted process and SRE detonation results. The penetration process and the formation cause of damage were analyzed. The detonation performance of TNT, reference propellant, and the propellant used in this experiment was compared. The axial acceleration caused by the explosion was also analyzed. By comprehensive comparison, the energy released by the detonation of this propellant is larger, and the HMX or Al particles contained in this propellant are more than the reference propellant, with a TNT equivalent of 1.168–1.196. Finally, advanced protection armor suggestions were proposed based on the theory of woven fabric rubber composite armor (WFRCA).     

装备保障综合演练风险分析

采用工作结构分解(Work Breakdown Structure,WBS)和风险结构分解法(Risk Breakdown Structure,RBS)对装备保障综合演练全过程的风险及其风险因素进行了系统分析,得出了装备保障综合演练过程中存在的7类风险、24种风险因素;运用网络层次分析法(Analytic Network Process,ANP)对各种风险及其风险因素进行了评估,得出了其对装备保障综合演练风险影响的权重及排序。研究结果可为装备保障综合演练顺利开展,确保人员、装备安全提供参考。     

医院供配电系统谐波测量和分析

为治理日趋严重的医院供配电系统谐波污染,需要深入了解医院谐波分布。利用FLUKE 43B对某医院进行现场谐波测试,基于所得数据重点分析了医院供配电系统谐波污染和谐波源分布情况,根据医院谐波污染特点总结了治理方法。结果表明:医院供配电系统存在严重的谐波污染。被测量医院设备先进,种类齐全,测试所得数据具有较强的代表性,可为医院供配电系统谐波研究、谐波治理和滤波设备选择提供基础数据参考。     

基于ANSYS的油罐拱顶稳定性分析

针对加肋拱顶稳定性十分复杂的问题,基于ANSYS建立了加肋拱顶油罐的三维有限元模型,对加肋拱顶的结构稳定性进行了数值模拟。对加肋拱顶在外压作用下的线性与非线性临界屈曲载荷进行了对比分析,利用弧长法获得了拱顶在加肋情况下径向、环向、轴向的载荷-位移曲线。结果表明:数值模拟的加肋拱顶屈曲方向和屈曲区域与实际失稳结果相一致,可以为加肋拱顶设计和稳定性分析提供一定参考。     

钢丝增强复合条带抗弹性能数值分析

为研究钢丝增强聚合物基复合条带的抗弹性能,基于冲击动力学理论分析其抗弹机理,再借助ANSYS/LS-DYNA软件和LS-PrePost前后处理器模拟有无增强钢丝2种工况下,条带对7.62 mm弹体的冲击响应。分析表明：条带的弹性模量、剪切模量和面密度会影响其能量吸收性能,能量吸收量随三者的增大而增大;由于聚合物基体的正交各向异性,应力云图显示出扁平椭圆状是合理的;在聚合物基复合条带中嵌入增强钢丝对条带整体的抗弹性能有积极的影响,但嵌入过量的钢丝会导致重量和成本的增加,因此需要对合理的钢丝配比率作进一步研究。研究结果可为钢丝增强聚合物基复合条带在野战防护结构中的应用提供参考。     

基于备件需求预测的两步法理论

在对备件需求时间序列研究的基础上,结合指数平滑法和Croston法的特点,分析了指数平滑法与两步法的原理,通过对指数平滑法和两步法方差的研究,得到两步法是指数平滑法的一般形式的结论,为两步法的进一步研究提供一定的理论支撑。     

基于排队论的协同防空作战效能分析

舰艇编队协同防空作战是未来海战的重要形式,运用排队论对舰艇编队协同防空的作战效能进行了研究。以排队理论为基础建立了舰艇编队协同防空的排队模型,运用理论分析得到了以整个编队毁伤目标概率为指标的防空效能。通过对防空效能的计算与仿真,分析了几个重要参数对防空效能的影响,为多层舰艇防空系统的设计与运用提供了理论支持。     

Long-rod penetration: the transition zone between rigid and hydrodynamic penetration modes

Long-rod penetration in a wide range of velocity means that the initial impact velocity varies in a range from tens of meters per second to several kilometers per second. The long rods maintain rigid state when the impact velocity is low, the nose of rod deforms and even is blunted when the velocity gets higher, and the nose erodes and fails to lead to the consumption of long projectile when the velocity is very high due to instantaneous high pressure. That is, from low velocity to high velocity, the projectile undergoes rigid rods, deforming non-erosive rods, and erosive rods. Because of the complicated changes of the projectile, no well-established theoretical model and numerical simulation have been used to study the transition zone. Based on the analysis of penetration behavior in the transition zone, a phenomenological model to describe target resistance and a formula to calculate penetration depth in transition zone are proposed, and a method to obtain the boundary velocity of transition zone is determined. A combined theoretical analysis model for three response regions is built by analyzing the characteristics in these regions. The penetration depth predicted by this combined model is in good agreement with experimental result.     

基于敏感性分析的DF化学动力学模型的简化

基于两种燃料体系下的DF详细化学反应动力学模型,利用敏感性分析的方法,分别提出了相应的简化反应机理.简化过程中发现,仅考虑DF“冷反应”泵浦过程,忽略掉高振动激发态,忽略掉D2和DF分子的离解复合反应对整个系统影响不大.DF分子之间以及DF与D、D2、HF之间的能量转移反应具有较高的敏感性.简化机理在有效概括DF化学反...     

多尺度PCA-HOG遥感异源图像匹配算法

针对遥感异源图像匹配中非线性灰度畸变和强噪声干扰问题,提出一种基于主成分分析(Principal Components Analysis,PCA)和方向梯度直方图(Histogram of Oriented Gradients,HOG)的遥感异源图像匹配算法.该算法利用HOG提取图像间的几何结构共性特征,能有效克服异源...