基于有色Petri网的CAN总线仿真与性能分析

针对CAN总线的多主竞争模式通过解析法难以建模这一问题,运用CPN Tools工具构建了基于有色Petri网的CAN总线CSMA/CA竞争机制模型,模拟了CAN总线的静态结构和动态行为,对CAN总线性能进行了仿真与分析。仿真结果验证了所建CAN总线模型的合理性与正确性。     

科氏流量计信号频率的变步长直接估计算法

研究科氏流量计频率估计方法对提高其测量精度具有重要意义.分析了变步长直接频率估计( VS-DFE)方法的原理,归纳出一种基于VS-DFE的科氏流量计信号频率估计算法,给出了算法基本思想、流程和实现步骤.分别针对两种常见流量状态下科氏流量计的固定频率信号和时变信号进行仿真分析,并与离散频谱校正法进行了比较.仿真结果表明,...     

毫米波雷达导引头性能分析与研究

毫米波雷达的频段介于微波频段与红外频段之间,兼有二者固有特性,是武器制导系统较为理想的使用频段。介绍了毫米波雷达制导的技术优点,对复杂气候条件和不同地表环境下35GHz和95 GHz 2种毫米波雷达的性能进行了仿真。仿真结果表明,当目标处在复杂气候环境或较好地表环境(即地表后向散射较弱)时,35 GHz雷达的性能要稍优于95 GHz雷达。     

基于OFD-LFM信号的MIMO雷达微多普勒效应分析

多输入多输出(MIMO)雷达系统利用空间分集技术,能够在不同视角接收目标回波信号,与传统单基雷达系统相比,可以提取更丰富的目标特征信息,因而大大提高了雷达的目标运动参数估计精度。基于MIMO雷达系统,详细推导了正交频分线性调频信号体制下目标部件旋转引入的微多普勒效应,通过取多组观测数据的数学期望对旋转半径进行了参数估计,最后的仿真实验验证了理论分析的结果,得到的旋转半径估值与真实值非常接近。     

非平稳噪声背景下DOA分步估计方法研究

针对相干和非相干信源同时存在的情况,结合斜投影理论和互相关矢量Toeplitz矩阵重构(CVTR)的方法,提出一种新的信源DOA分步估计方法。该方法把相干信源和非相干信源分开分辨,对相干信源用CVTR方法来恢复为满秩,避免了常规平滑算法阵列孔径损失大、运算量大的缺点;用斜投影算子而非差分方法对信源进行分离,不受相关矩阵须为Toeplitz结构的限制,使得算法可适用于任意阵列结构形式。这种分步分辨思路可有效增强信源过载能力,同时在互相关矢量Toeplitz矩阵重构过程中,可把非平稳噪声协方差矩阵转换成白噪声结构,使得算法对非平稳噪声有较好的适应能力。     

Signal‐to‐interference‐plus‐noise ratio estimation for wireless communication systems: Methods and analysis

The Signal‐to‐Interference‐plus‐Noise Ratio (SINR) is an important metric of wireless communication link quality. SINR estimates have several important applications. These include optimizing the transmit power level for a target quality of service, assisting with handoff decisions and dynamically adapting the data rate for wireless Internet applications. Accurate SINR estimation provides for both a more efficient system and a higher user‐perceived quality of service. In this paper, we develop new SINR estimators and compare their mean squared error (MSE) performance. We show that our new estimators dominate estimators that have previously appeared in the literature with respect to MSE. The sequence of transmitted bits in wireless communication systems consists of both pilot bits (which are known both to the transmitter and receiver) and user bits (which are known only by the transmitter). The SINR estimators we consider alternatively depend exclusively on pilot bits, exclusively on user bits, or simultaneously use both pilot and user bits. In addition, we consider estimators that utilize smoothing and feedback mechanisms. Smoothed estimators are motivated by the fact that the interference component of the SINR changes relatively slowly with time, typically with the addition or departure of a user to the system. Feedback estimators are motivated by the fact that receivers typically decode bits correctly with a very high probability, and therefore user bits can be thought of as quasipilot bits. For each estimator discussed, we derive an exact or approximate formula for its MSE. Satterthwaite approximations, noncentral F distributions (singly and doubly) and distribution theory of quadratic forms are the key statistical tools used in developing the MSE formulas. In the case of approximate MSE formulas, we validate their accuracy using simulation techniques. The approximate MSE formulas, of interest in their own right for comparing the quality of the estimators, are also used for optimally combining estimators. In particular, we derive optimal weights for linearly combining an estimator based on pilot bits with an estimator based on user bits. The optimal weights depend on the MSE of the two estimators being combined, and thus the accurate approximate MSE formulas can conveniently be used. The optimal weights also depend on the unknown SINR, and therefore need to be estimated in order to construct a useable combined estimator. The impact on the MSE of the combined estimator due to estimating the weights is examined. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

Balancing perfectly periodic service schedules: An application from recycling and waste management

A national recycling and waste management company provides periodic services to its customers from over 160 service centers. The services are performed periodically in units of weeks over a planning horizon. The number of truck‐hours allocated to this effort is determined by the maximum weekly workload during the planning horizon. Therefore, minimizing the maximum weekly workload results in minimum operating expenses. The perfectly periodic service scheduling (PPSS) problem is defined based on the practices of the company. It is shown that the PPSS problem is strongly NP‐hard. Attempts to solve large instances by using an integer programming formulation are unsuccessful. Therefore, greedy BestFit heuristics with three different sorting schemes are designed and tested for six real‐world PPSS instances and 80 randomly generated data files. The heuristics provide effective solutions that are within 2% of optimality on average. When the best found BestFit schedules are compared with the existing schedules, it is shown that operational costs are reduced by 18% on average. © 2012 Wiley Periodicals, Inc. Naval Research Logistics 59: 160–171, 2012     

基于导航定位服务性能的GNSS天线阵 抗干扰统计性能评估方法

基于可用率指标的天线阵统计性能评估方法已成为GNSS天线阵性能评估的共识,但在指标体系及具体细节上,传统的评估方法尚存在不足之处.一是对信号作独立均匀入射的假设,与实际星座特性相差较大,二是单信号可用率指标尚无法满足GNSS接收机对导航定位的需求.针对这两方面的问题,提出了可定位概率、服务可用性等与接收机导航定位服务性能相关联的新指标.结合实际导航卫星星座的分析验证了新指标的有效性.     

基于动力学仿真的6×6轮式越野车辆总体性能评价

为分析和评价某型6×6轮式越野车辆的总体设计性能,建立了整车多刚体动力学模型、刚柔耦合动力学模型以及悬架系统台架试验模型,计算了整车固有特性,依次进行了悬架系统运动学、行驶动力学、操纵稳定性分析。在计算车体和悬架摆臂结构模态的基础上,考核了典型行驶工况下车体和悬架部件结构的动态强度,依据国家相关标准,利用仿真结果对6×6整车设计进行了系统的评价,指出了该越野车总体设计性能的不足,为其进一步改进和优化设计提供了参考依据。研究方法对其他轮式越野车辆系统的设计和评价具有一定的参考价值。     

基于正则化的多平台多传感器导航定位和探测偏差估计

针对影响舰载雷达探测误差主要为平台导航定位误差和传感器自身探测误差,对这两类误差的影响因素进行了分析,首次综合考虑这两种系统误差,提出了一种基于正则化的多平台导航定位及探测偏差估计方法,利用不同舰艇上传感器对公共目标探测的迭合条件,建立系统误差观测方程,利用LS对两种系统误差同时进行了估计,并在偏差估计中采用正则化估计方法,提高估计结果的稳定性,最后进行了仿真验证,仿真效果验证了算法的有效性,具有较高的工程应用价值。