MIMO雷达和组网雷达的CA2CFAR检测性能比较

多输入多输出(MIMO)雷达是近几年出现的一种新雷达技术,也是近几年雷达领域研究的重点。建立MIMO雷达的信号模型,明确给出MIMO雷达进行CA2CFAR检测的检测概率和虚警概率解析表达式,对组网雷达和MIMO雷达在均匀杂波背景下CA2CFAR检测性能进行了分析对比。仿真结果表明。MIMO雷达对类似噪声特性的复杂目标具有更好的检测性能。     

组合赋权法在指控系统性能评估中的应用

对作战单元以上级防空导弹指控系统的性能评估是一个多目标评价过程,多目标评价中的关键点是目标权重的确定.运用基于最小三乘原理的组合赋权法,根据给定的评估指标体系,对指控系统性能进行综合评价,给出了系统性能的评估算法,并在仿真系统中得到验证.     

热气溶胶灭火装置安全隐患探讨

针对目前市场上热气溶胶灭火装置＂爆炸＂及存在安全隐患,阐述了其发生原理,并提出了热气溶胶灭火装置应严格控制的一些安全性能指标和结构方式。     

基于加速寿命试验的晶体管静电放电潜在性失效的研究

对高频小功率硅双极结型晶体管2SC3356进行静电放电试验,并利用加速寿命试验原理对两组器件进行加速寿命试验。采用Arrhenius模型对试验结果进行计算分析,发现低于损伤阈值的ESD注入可以使器件的寿命缩短,得出ESD可以在高频小功率硅双极结型晶体管内部造成潜在性失效,使得器件寿命缩短。     

基于性能的装备采购合同商选择研究

根据基于性能的装备采购目标,在考虑合同商满足军方提出的性能指标的基础上,从合同商的资质、生产技术能力、装备价格成本、装备保障性能、管理运营情况和双方协商沟通水平等方面建立了合同商选择评价指标体系,并运用层次变权综合决策方法进行综合评判。案例分析表明：该方法能充分反映决策者的意愿,使合同商的选择更好地满足基于性能的装备采购的需要。     

车用再制造发动机验收检验台架磨合规范试验研究

对未经磨合的再制造发动机新品进行动力性能试验,试验结果与原机标准相差较大,经分析后认为未进行充分磨合是性能不达标的主要原因。针对再制造发动机的出厂验收技术特点,制定了小负荷循环磨合规范,并对起初推断进行了试验验证。根据磨合过程中发动机动力性能的变化规律,通过试验对磨合规范进行了优化,总结出了快速有效的台架磨合规范。试验结果表明：快速磨合规范不仅能够提高磨合效率,而且保证了磨合效果。     

关联网络中的级联失效模型与分析

网络之间的关联依赖关系能使某一网络内的级联失效扩散至其他网络,其本质是位于不同网络的关联节点之间基于功能依赖的相关失效.以两个关联的网络为对象,建立关联网络模型,提出了一种关联网络的级联失效模型.模型将关联网络中的级联失效分解为网络内级联失效和网络间级联失效,并采用了基于度的级联规模评价方法.利用模型研究了两个关联无标...     

A reusable planar triggered spark-gap switch batched-fabricated with PCB technology for medium-and low-voltage pulse power systems

Triggered spark-gap switch is a popular discharge switch for pulse power systems. Previous studies have focused on planarizing this switch using thin film techniques in order to meet the requirements of compact size in the systems. Such switches are one-shot due to electrodes being too thin to sufficiently resist spark-erosion. Additionally, these switches did not employ any structures in securing internal gas composition, resulting in inconsistent performance under harsh atmospheres. In this work, a novel planar triggered spark-gap switch (PTS) with a hermetically sealed cavity was batched-prepared with printed circuit board (PCB) technology, to achieve reusability with low cost. The proposed PTS was inspected by micro-computed tomography to ensure PCB techniques meet the requirements of machining precision. The results from electrical experiments demonstrated that PCB PTS were consistent and reusable with lifespan over 20 times. The calculated switch voltage and circuit current were consistent with those derived from real-world measurements. Finally, PCB PTS was used to introduce hexanitrostilbene (HNS) pellets in a pulse power system to verify its performance.     

Effect of metal powders on explosion of fuel-air explosives with delayed secondary igniters

In order to improve the energy level of fuel air explosive(FAE) with delayed secondary igniters, high energetic metal powders were added to liquid fuels mainly composed of ether and isopropyl nitrate. Metal powders' explosive properties and reaction mechanisms in FAE were studied by high-speed video, pressure test system, and infrared thermal imager. The results show that compared with pure liquid fuels, the shock wave overpressure, maximum surface fireball temperature and high temperature duration of the mixture were significantly increased after adding high energetic metal powder. The overpressure values of the liquid-solid mixture at all measuring points were higher than that of the pure liquid fuels. And the maximum temperature of the fireball was up to 1700 ℃, which was higher than that of the pure liquid fuels. After replacing 30％of aluminum powder with boron or magnesium hydride, the shock wave pressure of the mixture was further increased. The high heat of combustion of boron and the hydrogen released by magnesium hydride could effectively increase the blast effect of the mixture. The improvement of the explosion performance of boron was better than magnesium hydride. It shows that adding high energetic metal powder to liquid fuels can effectively improve the explosion performance of FAE.     

灰色分析法在物流绩效评价中的应用研究

提出了基于灰色关联度的物流绩效灰色评价模型。阐明了灰色分析法进行物流绩效评价的方法,并与文献[1]的方法进行了比较。结果表明灰关联分析方法应用于物流绩效评价是有效的、可行的,且具有分析全面、方法简便、易于计算机实现等特点。