基于灰色系统理论的军队油料节约人员360度绩效评估

基于360度绩效评估理论,从德、能、勤、绩4个方面构建了包含4个1级指标和16个2级指标的军队油料节约人员360度绩效评估指标体系。利用层次分析法确定了各评估指标的权重,运用灰色系统理论的原理和方法,构建了多层次灰色评估模型,并对某油料节约小组5位油料节约人员进行了360度绩效评估。案例应用表明,此方法具有系统综合各层评估者提供的"贫信息"的优点,不仅能得出被评估者的灰类及优劣顺序,而且得到了各指标所属灰类和具体的灰色评价权值,使360度绩效较好地实现了绩效反馈的目的。该研究为军队油料节约人员绩效管理工作提供了新的思路和方法。     

纯方位交叉定位算法分析

摘要：针对纯方位交叉定位中存在着地球曲率对定位精度影响的问题本文提出了基于正北方向修正和椭球模型两种定位算法。通过与传统的交叉定位算法比较,可以看出这两种算法具有较好的定位精度。在理论上分析了测量误差和观测站位置误差对定位精度产生的影响,给出了几何精度因子（GDOP）的理论推导和仿真结果。     

基于3DS的ISAR二维散射点模型仿真

当前,对ISAR成像和目标识别的研究很多,但用于ISAR成像和目标识别的目标模型大都相对简单.建立一种新的ISAR二维散射点模型,生成目标各种姿态的二维散射点数据库.首先选用3DS为散射点生成模型,以此为基础完成模型简化和信息抽取.然后根据目标姿态变化,计算转换坐标,并以F16战斗机为例生成二维散射点图像.最后采用步进频雷达信号对目标散射点模型进行ISAR成像.所建立的目标二维散射点模型可以用于ISAR成像和目标识别研究.     

改进型JDL模型在武警部队院校信息化建设中的构建

在武警部队院校的网络信息化水平迅速发展的今天,由于各功能模块缺少统一的接口规范和能够协调各部门信息共享的机制,使得建成的各个功能模块之间无法共享信息,造成了数据库中信息的大量冗余和重复。结合数据融合技术的基本原理、发展现状和应用前景,对数据融合技术进行了介绍;针对武警院校信息融合的需求,提出了改进型JDL模型,分析了武警院校信息融合网络的服务架构层次,对信息融合网络中的核心问题信息共享、接口规范、数据融合进行了研究;利用模块化设计的思路,对原型系统进行了分析,对实验数据进行了重组,并提出了数据优化方案。     

基于NFxPEM算法的调制气流声源的非线性补偿

针对调制气流声源存在较强的谐波畸变,将声源系统等效为Hammerstein非线性模型,利用该模型下的预失真技术对声源进行非线性补偿研究。根据辨识的Hammerstein模型中静态非线性部分带有直流分量的特点,给出了考虑直流分量补偿的预失真算法,并用数值仿真验证了算法的准确性和直流分量补偿的必要性。在非线性补偿实验中,根据单频信号辨识得到Hammerstein模型参数,采用NFxPEM算法求得对应的预失真Wiener模型参数和预失真波形。实验结果表明, 与直接发射相比,补偿发射后声波的功率谱中谐波能量有所下降,而基频能量有小幅度的上升,说明了研究思路的正确性。     

基于删除平均的VI-CFAR检测器

针对MLVI-CFAR检测器在多个随机分布干扰目标背景下检测性能不好,以及OSVI-CFAR检测器在均匀环境和仅单滑窗存在干扰目标的环境下检测性能欠佳问题,提出了一种基于删除平均(CML)的VI-CFAR检测器(CMLVI-CFAR).仿真验证了CMLVI-CFAR检测器在均匀背景及多目标干扰环境下,都具有比MLVI和OSVI-CFAR检测器好的检测性能,并且其在杂波边缘背景下的虚警控制能力与前两者也基本一致,说明其在实际杂波环境中具有更强的鲁棒性和良好的应用潜力.     

基于方位特征序列的地雷鉴别算法

在使用低频超宽带合成孔径雷达(UWB-SAR)对地雷进行探测的过程中,根据目标电磁散射随方位角和入射角的变化特性,提出一种利用双峰间距和频率凹点特征沿方位向变化的隐马尔科夫模型(HMM)鉴别算法。该算法首先针对目标感兴趣区域(ROI)图像估计其各方位回波响应,然后利用时频原子提取时域双峰间距和频率凹点,进而得到随方位角变化的特征序列,再通过SAR工作时方位角和入射角的变化特点以及训练样本确定HMM参数,并在此基础上计算疑似目标新的特征矢量,采用马氏距离进行判别。实验结果表明了本文所提方法在目标鉴别方面的有效性。     

利用深度学习的硬件计数器复用估计算法

利用深度学习方法,为硬件计数器复用(multiplexing,MPX)提供结果精度更高的估计模型。通过对MPX估计得到的结果与实际采集的真实数据进行相似性分析,证明相同程序多次运行之间得到的硬件计数值是线性相关的。采用神经网络多层感知器(multilayer perceptron,MLP)和双向门控神经网络(bidirectional gated recurrent unit, Bi-GRU)这2种深度学习模型,对MPX数据进行拟合。基于动态时间规整(dynamic time warping, DTW),提出一个全新的评估MPX数据精度的指标DTW-cost。实验结果表明,同时收集15个硬件事件数据时,MLP方法拟合得到的13个高性能计算应用平均准确率比现有使用最广的固定插值法高出10.53%,最多可提升19.8%;而在MLP表现较差的事件上,Bi-GRU方法得到的平均准确率提升了28.8%。     

Tuning the reactivity of Al–Ni by fine coating of halogen-containing energetic composites

In this paper, various core-shell structured Al–Ni@ECs composites have been prepared by a spray-drying technique. The involved ECs refer to the energetic composites (ECs) of ammonium perchlorate/nitrocellulose (AP/NC, NA) and polyvinylidene fluoride/hexanitrohexaazaisowurtzitane (PVDF/CL-20, PC). Two Al–Ni mixtures were prepared at atomic ratios of 1:1 and 1:3 and named as Al/Ni and Al/3Ni, respectively. The thermal reactivity and combustion behaviors of Al–Ni@ECs composites have been comprehensively investigated. Results showed that the reactivity and combustion performance of Al–Ni could be enhanced by introducing both NA and PC energetic composites. Among which the Al/Ni@NA composite exhibited higher reactivity and improved combustion performance. The measured flame propagation rate (v = 20.6 mm/s), average combustion wave temperature (T_max = 1567.0 °C) and maximum temperature rise rate (γ_t = 1633.6 °C/s) of Al/Ni@NA are higher than that of the Al/Ni (v = 15.8 mm/s, T_max = 858.0 °C, and γ_t = 143.5 °C/s). The enhancement in combustion properties could be due to presence of the acidic gaseous products from ECs, which could etch the Al₂O₃ shell on the surface of Al particles, and make the inner active Al to be easier transported, so that an intimate and faster intermetallic reaction between Al and Ni would be realized. Furthermore, the morphologies and chemical compositions of the condensed combustion products (CCPs) of Al–Ni@ECs composites were found to be different depending on the types of ECs. The compositions of CCPs are dominated with the Al–Ni intermetallics, combining with a trace amount of Al₅O₆N and Al₂O₃.     

Performances and direct writing of CL-20 based ultraviolet curing explosive ink

A new type of explosive ink formulation that can be quickly cured was prepared with unsaturated polyester as binder,styrene as active monomer,2,4,6-trimethylbenzoyl-diphenylphosphine oxide as photoinitiator,and hexanitrohexaazaisowurtzitane (CL-20) as the main explosive.Then the explosive ink direct writing technology was used to charge the micro-sized energetic devices,the curing mechanism of the explosive ink was discussed,and the microstructure,safety performance and explosive transfer performance of the explosive ink molded samples were tested and analyzed.Results indicate that the composite material has a fast curing molding speed,its hardness can reach 2H within 8 min.The crystal form of CL-20 in the molded sample is still ε type.The CL-20 based W-curing explosive ink formulation has good compatibility,its apparent activation energy is increased by about 3.5 kJ/mol.The composite presents a significant reduction in impact sensitivity and its characteristic drop height can reach 39.8 cm,which is about 3 times higher than the raw material.When the line width of charge is 1.0 mm,the critical thickness of the explosion can reach 0.015 mm,and the explosion velocity is 7129 m/s when the charge density is 1.612 g/cm3.