二维超声速空气引射器启动特性试验研究

xxxx超声速引射器是高空模拟试车台的重要组件,在发动机启动前利用引射器对试验舱预抽真空可避免发动机启动初始时刻燃气漏入试验舱造成燃气在发动机中分离,对获取发动机在高空环境下的完整推力特性具有重要意义。而该工况下超声速引射器的启动过程是引射器工作过程中最为恶劣的工况,设计不合理的引射器会导致启动压力过高甚至不能实现启动。建立了缩比超声速空气引射器试验台对超声速引射器的启动特性进行研究,采用压力测量方法结合纹影技术对超声速引射器处于极限启动压比时的流场进行了描述,研究结果表明混合室收缩比越小,引射器极限启动压比越低。同时给出了定位超声速引射器不启动原因的判据：当引射器不启动是由引射总压不足引起时,盲腔压力在引射总压提高时降低,并在临界启动状态下达到最小值;而由混合室收缩比过小导致的引射器不启动在引射总压提高时盲腔压力单调上升。     

基于灰色AHP方法的综合航电系统效能

针对在对综合航电系统效能进行评估的过程中经常遇到多指标度量效能的情况,提出了一种将层次分析法和灰色系统理论相结合的效能评估方法,对航空电子系统中多指标度量效能进行评估.最后,通过实例计算表明使用这种方法获得的评估结果更加客观、科学,对综合航空电子系统效能的评估具有一定的参考价值.     

Nonparametric bayesian lifetime data analysis using dirichlet process lognormal mixture model

We propose a nonparametric Bayesian lifetime data analysis method using the Dirichlet process mixture model with a lognormal kernel. A simulation‐based algorithm that implements the Gibbs sampling is developed to fit the Dirichlet process lognormal mixture (DPLNM) model using rightly censored failure time data. Five examples are used to illustrate the proposed method, and the DPLNM model is compared to the Dirichlet process Weibull mixture (DPWM) model. Results indicate that the DPLNM model is capable of estimating different lifetime distributions. The DPLNM model outperforms the DPWM model in all the examples, and the DPLNM model shows promising potential to be applied to analyze failure time data when an appropriate parametric model for the data cannot be specified. © 2013 Wiley Periodicals, Inc. Naval Research Logistics, 2013     

要地防空指挥控制系统作战效能灰色聚类评估

建立要地防空指挥控制系统作战效能评估指标体系,运用层次分析法确定各层次指标权重,提出了一种基于灰色定聚类和中心点三角白化权函数的要地防空指挥控制系统作战效能灰色聚类评估方法,并通过算例对该方法的有效性进行了检验。结果表明该方法是切实可行的。     

含脉冲负载的综合电力系统储能优化配置研究

考虑到舰船环境限制和高能脉冲负载对储能的需求,有必要对储能装置进行合理的选型和优化配置,来提升综合电力系统性能。为此,基于带权极小模理想点法和层次分析法,提出了一种储能装置性能评价函数,并以其为优化目标,进行储能装置优化配置。所提出的评价函数充分考虑系统需求和脉冲负载特性,以储能装置体积、质量和经济性作为评价函数主要组成部分,同时考虑功率、能量、电压、荷电状态等约束,建立优化配置模型,并采用差分进化算法进行求解。以高性能锂电池和超级电容器为例,对所提模型进行求解计算,结果表明在所给权重系数下锂电池性能更优,更适用于综合电力系统,并给出了优化配置后的指导方案。     

月壤参数对月面着陆气囊缓冲性能的影响

为研究月壤参数对气囊缓冲性能的影响,根据“嫦娥三号”的着陆工况设计了月面着陆气囊,并基于可压溃泡沫模型建立了考虑月壤特性的气囊缓冲动力学模型。对不同月壤下气囊的缓冲过程进行分析,发现月壤越软有效载荷冲击加速度越小,但气囊会陷入月壤中,不利于对外排气,影响其缓冲效果。因此,采用气囊峰值压力、有效载荷最大加速度和最大下落高度3个指标对气囊缓冲性能进行综合评价,定量研究了月壤参数的影响规律。结果表明:月壤密度、剪切模量及屈服参数a₀和a₁对缓冲性能的影响较大,且对前两个指标为正影响,对后一个指标为负影响。进一步研究发现,这4个月壤参数与3个缓冲性能指标之间〖BHDWG8,WK10YQ,DK1*2,WK1*2D〗〖XCZX.TIF;%129%129〗听语音 聊科研与作者互动 均为指数函数关系。     

节点实时性能自适应的集群资源分配算法

由于配置和所运行作业的不同,集群各节点的实时性能差异较大。为提高集群性能,提出节点实时性能自适应的集群资源分配算法 (node real-time performance adaptive cluster resource scheduling algorithm,NPARSA)。节点实时性能用其配置(CPU核数及速度、内存容量、磁盘容量)和实时状态参数(CPU、内存和磁盘的剩余数量及磁盘读写速度)表示。NPARSA根据作业类型自主选择节点性能评价指标的权值,实现节点实时性能对于作业类型的自适应。实时性能最优的节点分配给作业。虚拟机实验和物理集群实验表明,与Spark默认资源分配算法、没有考虑作业类型与节点匹配的算法、使用作业和节点匹配差异程度作为资源分配依据的算法相比,NPARSA能更有效地缩短作业执行时间、提高集群性能。     

Thermal hazard assessment of TKX-50-based melt-cast explosive

In the present study, thermal hazards of TNT and DNAN used as the molten binder in TKX-50-based melt-cast explosives were comparatively studied through accelerating rate calorimeter (ARC) and Cook-off experiments. Two kinds of ARC operation modes were performed to investigate the thermal safety performance under adiabatic conditions (HWS mode) and constant heating (CHR mode). The obtained results demonstrated that at both heating modes, DNAN/TKX-50 outperformed TNT/TKX-50 from the thermal safety point of view. However, the sensitivity to heat of the samples was reverse because of the different heating modes. In addition, the results of thermal hazard assessment obtained from the cook-off experiment complied with ARC analysis which indicated the molten binder TNT replaced by DNAN would reduce the hazard of the TKX-50 melt cast explosive. Furthermore, the results of cook-off experiments also showed that DNAN/TKX-50 outperformed TNT/TKX-50 from the aspect of thermal stability, which was consistent with the result of CHR mode because of the similar heating process.     

Analysis on damage characteristics and detonation performance of solid rocket engine charge subjected to jet

To further explore the damage characteristics and impact response of the shaped charge to the solid rocket engine (SRE) in storage or transportation, protective armor was designed and the shelled charges model (SCM)/SRE with protective armor impacting by shaped charge tests were conducted. Air overpressures at 5 locations and axial acceleration caused by the explosion were measured, and the experimental results were compared with two air overpressure curves of propellant detonation obtained by related scholars. Afterwards, the finite element software AUTODYN was used to simulate the SCM impacted process and SRE detonation results. The penetration process and the formation cause of damage were analyzed. The detonation performance of TNT, reference propellant, and the propellant used in this experiment was compared. The axial acceleration caused by the explosion was also analyzed. By comprehensive comparison, the energy released by the detonation of this propellant is larger, and the HMX or Al particles contained in this propellant are more than the reference propellant, with a TNT equivalent of 1.168–1.196. Finally, advanced protection armor suggestions were proposed based on the theory of woven fabric rubber composite armor (WFRCA).     

基于马氏过程的电子对抗装备伺服驱动器可用度分析

针对电子对抗装备天线伺服系统驱动器可用度评估问题,考虑其具有优先使用权冷贮备冗余设计的特点,运用马尔可夫过程分析的方法,研究修理工人数不同情况下伺服驱动器稳态可用度和瞬时可用度,建立相应的数学模型,最后进行实例验证,绘出不同维修策略下系统瞬时可用度随时间变化的曲线.