气动式振动台气锤产生激励信号的机理及其性能研究

建立了阶梯式活塞气锤的力学模型,揭示了该类气锤产生碰撞信号的机理,针对两种不同型号的气锤,结合大量工程实验仿真生成了不同气压作用下两种气锤产生的激励信号,以激励信号的低频能量为气锤的性能指标,进一步评价了两种气锤的性能优劣.研究结果表明:大气锤的性能明显优于小气锤的性能.     

Replacing nonidentical vital components to extend system life

We consider a system that depends on a single vital component. If this component fails, the system life will terminate. If the component is replaced before its failure then the system life may be extended; however, there are only a finite number of spare components. In addition, the lifetimes of these spare components are not necessarily identically distributed. We propose a model for scheduling component replacements so as to maximize the expected system survival. We find the counterintuitive result that when comparing components' general lifetime distributions based on stochastic orderings, not even the strongest ordering provides an a priori guarantee of the optimal sequencing of components. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

The logistic–exponential survival distribution

For various parameter combinations, the logistic–exponential survival distribution belongs to four common classes of survival distributions: increasing failure rate, decreasing failure rate, bathtub‐shaped failure rate, and upside‐down bathtub‐shaped failure rate. Graphical comparison of this new distribution with other common survival distributions is seen in a plot of the skewness versus the coefficient of variation. The distribution can be used as a survival model or as a device to determine the distribution class from which a particular data set is drawn. As the three‐parameter version is less mathematically tractable, our major results concern the two‐parameter version. Boundaries for the maximum likelihood estimators of the parameters are derived in this article. Also, a fixed‐point method to find the maximum likelihood estimators for complete and censored data sets has been developed. The two‐parameter and the three‐parameter versions of the logistic–exponential distribution are applied to two real‐life data sets. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

Threshold optimization for weighted voting classifiers

Weighted voting classifiers considered in this paper consist of N units each providing individual classification decisions. The entire system output is based on tallying the weighted votes for each decision and choosing the one which has total support weight exceeding a certain threshold. Each individual unit may abstain from voting. The entire system may also abstain from voting if no decision support weight exceeds the threshold. Existing methods of evaluating the reliability of weighted voting systems can be applied to limited special cases of these systems and impose some restrictions on their parameters. In this paper a universal generating function method is suggested which allows the reliability of weighted voting classifiers to be exactly evaluated without imposing constraints on unit weights. Based on this method, the classifier reliability is determined as a function of a threshold factor, and a procedure is suggested for finding the threshold which minimizes the cost of damage caused by classifier failures (misclassification and abstention may have different price.) Dynamic and static threshold voting rules are considered and compared. A method of analyzing the influence of units' availability on the entire classifier reliability is suggested, and illustrative examples are presented. © 2003 Wiley Periodicals, Inc. Naval Research Logistics 50: 322–344, 2003.     

Network reliability assessment in a random environment

In this paper we consider networks that consist of components operating under a randomly changing common environment. Our work is motivated by power system networks that are subject to fluctuating weather conditions over time that affect the performance of the network. We develop a general setup for any network that is subject to such environment and present results for network reliability assessment under two repair scenarios. We also present Bayesian analysis of network failure data and illustrate how reliability predictions can be obtained for the network. © 2003 Wiley Periodicals, Inc. Naval Research Logistics 50: 574–591, 2003     

基于综合性能的C3I系统通信效能

论述了C3I的重要性及其效能,分析了影响通信系统性能的因素,力求在实时综合性能的基础上选择通信路由,论述了传统Petri网和模糊Petri网的一些基本概念和特点及其区别,描述了用模糊Petri网进行系统综合性能分析时的有效算法,提出一种基于综合性能的路由选择算法,最后,通过实例来说明通信路由综合性能评价以及路由选择方法.     

一种面向复杂系统的模糊可靠性分配方法

针对系统研制初期的不确定的约束条件与设计目标 ,进行了复杂系统模糊可靠性分配建模 ;结合遗传算法理论 ,考虑了一般系统的求解 ;实例分析验证了所提出方法的性能和可行性 .     

蒸汽动力装置分布式控制系统可靠性设计准则

讨论了为保证蒸汽动力装置分布式控制系统的可靠性所采取的一般技术 ,详细分析了提高蒸汽动力装置分布式控制系统可靠性的一般设计准则 ,包括系统设计的一般要求、计算机的选型、元器件的选择与使用以及抗干扰措施     

Two‐stage component test plans for testing the reliability of a series system

A system reliability is often evaluated by individual tests of components that constitute the system. These component test plans have advantages over complete system based tests in terms of time and cost. In this paper, we consider the series system with n components, where the lifetime of the i‐th component follows exponential distribution with parameter λ_i. Assuming test costs for the components are different, we develop an efficient algorithm to design a two‐stage component test plan that satisfies the usual probability requirements on the system reliability and in addition minimizes the maximum expected cost. For the case of prior information in the form of upper bounds on λ_i's, we use the genetic algorithm to solve the associated optimization problems which are otherwise difficult to solve using mathematical programming techniques. The two‐stage component test plans are cost effective compared to single‐stage plans developed by Rajgopal and Mazumdar. We demonstrate through several numerical examples that our approach has the potential to reduce the overall testing costs significantly. © 2002 John Wiley & Sons, Inc. Naval Research Logistics, 49: 95–116, 2002; DOI 10.1002/nav.1051     

准静态受遮蔽的Rician衰落信道中空时格码的性能上界

针对准静态受遮蔽的 Rician 衰落信道,在收端已知信道状态信息的条件下,文中分析了空时格码的性能.推导了码字差相关阵为对角阵的空时格码系统的成对差错概率的确切表达式,得到了相应空时格码在准静态受遮蔽的 Rician 衰落信道中的性能上界。仿真结果表明,在遮蔽不太严重的信道中,文中得到的 union 界与相应编码系统的实际性能有很好的近似度。