KDM 智能车的数学模型研究

本文确定了对载车数学模型构造方法,并试图以KDM-1移动机器人作为实例,用非完整系统力学当作分析工具,通过实验获得模型数据,并由实车行驶进行检验,几个重要参数由仿真试验校核。数学模型的仿真与室内的行车试验相对比的结果比较一致。对同类载车数学模型的建立提供了有效的方法。     

单片机控制的指挥仪航路产生系统

本文首先介绍单片机控制的指挥仪航路产生系统的原理及组成,重点讨论了目标现在点坐标由数字量到指挥仪所需要的模拟信号的转换方法,最后对该系统的误差结果进行了分析。     

Design of accelerated life testing plans under multiple stresses

Accelerated life testing (ALT) using multiple stresses is commonly used in practice to resemble the operating stresses at normal operating conditions and obtain failure observations in a much shorter time. However, to date, there is little research into the theory of planning ALT for reliability estimation with multiple stresses. ALT with multiple stresses can result in a large number of stress‐level combinations which presents a challenge for implementation. In this article, we propose an approach for the design of ALT plans with multiple stresses and formulate multistress test plans based on different objectives and practical constraints. We develop a simulated annealing algorithm to efficiently determine the testing plan parameters. We demonstrate the proposed method with examples based on an actual test conducted using three stress types. The obtained optimal test plans are compared with those based on fractional factorial design. © 2013 Wiley Periodicals, Inc. Naval Research Logistics 60: 468–478, 2013     

Technical and proliferation‐related aspects of the dismantlement of Russian Alfa‐Class nuclear submarines

When does a state become a “nuclear weapon state”? How we choose to answer this question has significant implications for proliferation assessment, analysis, and policy. Traditionally, the standard demarcation line has been a state's first nuclear test, but in recent years analysts have increasingly focused instead on the accumulation of a significant quantity (SQ) of fissile material. The article argues that although the test/no-test indicator clearly has problems, its replacement by the SQ/no-SQ indicator would be highly counterproductive. The article instead proposes supplementing the traditional test/no-test indicator with a theory-driven approach that focuses on the incentives and disincentives to test.     

基于TCP Veno算法的异构网络边界代理改进机制研究

针对在异构网络环境下无线网络的特点使TCP性能下降的问题,借鉴TCP Veno算法原理,提出基于网络状况评估的拥塞控制的性能增强代理改进工作机制,动态评估当前网络的状况,调整预应答发送窗口的阈值,提高性能增强代理在较大差异网络下的传输控制效能．基于NS-2的网络仿真测试对算法进行了验证,结果显示改进后的工作机制在丢包率较大的异构网络中性能有明显提升．     

NEVER-ENDING STORY

Consequential Damages of Nuclear War: The Rongelap Report, by Barbara Rose Johnston and Holly M. Barker. Left Coast Press, 2008. 296 pages, $29.95.     

基于灰色系统理论的军队油料节约人员360度绩效评估

基于360度绩效评估理论,从德、能、勤、绩4个方面构建了包含4个1级指标和16个2级指标的军队油料节约人员360度绩效评估指标体系。利用层次分析法确定了各评估指标的权重,运用灰色系统理论的原理和方法,构建了多层次灰色评估模型,并对某油料节约小组5位油料节约人员进行了360度绩效评估。案例应用表明,此方法具有系统综合各层评估者提供的"贫信息"的优点,不仅能得出被评估者的灰类及优劣顺序,而且得到了各指标所属灰类和具体的灰色评价权值,使360度绩效较好地实现了绩效反馈的目的。该研究为军队油料节约人员绩效管理工作提供了新的思路和方法。     

基于删除平均的VI-CFAR检测器

针对MLVI-CFAR检测器在多个随机分布干扰目标背景下检测性能不好,以及OSVI-CFAR检测器在均匀环境和仅单滑窗存在干扰目标的环境下检测性能欠佳问题,提出了一种基于删除平均(CML)的VI-CFAR检测器(CMLVI-CFAR).仿真验证了CMLVI-CFAR检测器在均匀背景及多目标干扰环境下,都具有比MLVI和OSVI-CFAR检测器好的检测性能,并且其在杂波边缘背景下的虚警控制能力与前两者也基本一致,说明其在实际杂波环境中具有更强的鲁棒性和良好的应用潜力.     

利用深度学习的硬件计数器复用估计算法

利用深度学习方法,为硬件计数器复用(multiplexing,MPX)提供结果精度更高的估计模型。通过对MPX估计得到的结果与实际采集的真实数据进行相似性分析,证明相同程序多次运行之间得到的硬件计数值是线性相关的。采用神经网络多层感知器(multilayer perceptron,MLP)和双向门控神经网络(bidirectional gated recurrent unit, Bi-GRU)这2种深度学习模型,对MPX数据进行拟合。基于动态时间规整(dynamic time warping, DTW),提出一个全新的评估MPX数据精度的指标DTW-cost。实验结果表明,同时收集15个硬件事件数据时,MLP方法拟合得到的13个高性能计算应用平均准确率比现有使用最广的固定插值法高出10.53%,最多可提升19.8%;而在MLP表现较差的事件上,Bi-GRU方法得到的平均准确率提升了28.8%。     

Tuning the reactivity of Al–Ni by fine coating of halogen-containing energetic composites

In this paper, various core-shell structured Al–Ni@ECs composites have been prepared by a spray-drying technique. The involved ECs refer to the energetic composites (ECs) of ammonium perchlorate/nitrocellulose (AP/NC, NA) and polyvinylidene fluoride/hexanitrohexaazaisowurtzitane (PVDF/CL-20, PC). Two Al–Ni mixtures were prepared at atomic ratios of 1:1 and 1:3 and named as Al/Ni and Al/3Ni, respectively. The thermal reactivity and combustion behaviors of Al–Ni@ECs composites have been comprehensively investigated. Results showed that the reactivity and combustion performance of Al–Ni could be enhanced by introducing both NA and PC energetic composites. Among which the Al/Ni@NA composite exhibited higher reactivity and improved combustion performance. The measured flame propagation rate (v = 20.6 mm/s), average combustion wave temperature (T_max = 1567.0 °C) and maximum temperature rise rate (γ_t = 1633.6 °C/s) of Al/Ni@NA are higher than that of the Al/Ni (v = 15.8 mm/s, T_max = 858.0 °C, and γ_t = 143.5 °C/s). The enhancement in combustion properties could be due to presence of the acidic gaseous products from ECs, which could etch the Al₂O₃ shell on the surface of Al particles, and make the inner active Al to be easier transported, so that an intimate and faster intermetallic reaction between Al and Ni would be realized. Furthermore, the morphologies and chemical compositions of the condensed combustion products (CCPs) of Al–Ni@ECs composites were found to be different depending on the types of ECs. The compositions of CCPs are dominated with the Al–Ni intermetallics, combining with a trace amount of Al₅O₆N and Al₂O₃.