Numerical simulation study on penetration performance of depleted Uranium (DU) alloy fragments

Due to its high strength, high density, high hardness and good penetration capabilities, Depleted ura-nium alloys have already shined in armor-piercing projectiles. There should also be a lot of room for improvement in the application of fragment killing elements. Therefore, regarding the performance of the depleted uranium alloy to penetrate the target plate, further investigation is needed to analyze its advantages and disadvantages compared to tungsten alloy. To study the difference in penetration per-formance between depleted uranium alloy and tungsten alloy fragments,firstly, a theoretical analysis of the adiabatic shear sensitivity of DU and tungsten alloys was given from the perspective of material constitutive model. Then, taking the cylindrical fragment penetration target as the research object, the penetration process and velocity characteristics of the steel target plates penetrated by DU alloy frag-ment and tungsten alloy fragment were compared and analyzed, by using finite element software ANSYS/LS-DYNA and Lagrange algorithm. Lastly, the influence of different postures when impacting target and different fragment shapes on the penetration results is carried out in the research. The results show that in the penetration process of the DU and tungsten alloy fragments, the self-sharpening properties of the DU alloy can make the fragment head sharper and the penetrating ability enhance. Under the same conditions, the penetration capability of cylindrical fragment impacting target in vertical posture is better than that in horizontal posture, and the penetration capability of the spherical fragment is slightly better than that of cylindrical fragment.     

卫星地面站自动测试软件的“三化”设计

应用MVC设计模式,采用PIM应用架构,通过动态链接库和构件技术,对卫星地面站自动测试软件进行了通用化、系列化和组合化设计。     

舰空导弹武器系统软件靶场综合测试分析

针对舰空导弹武器系统的特点以及舰空导弹武器系统软件定型试验的现状,指出了舰空导弹武器系统软件靶场测试的必要性、特殊性。通过靶场软件测试综合试验,总结了舰空导弹武器系统软件靶场定型的试验方法。并指出了靶场软件测试的发展方向。     

爆炸复合接头剪切强度测试方法研究

参照正交各向异性层压复合板层间剪切强度的测试方法,提出了用于测试爆炸复合接头复合界面剪切强度的3种方法;并建立三维有限元模型,分别对3种测试方法进行模拟;最后分别对3种方法进行了测试试验.结果表明,3种试验方法均能有效测试爆炸复合接头的剪切强度,其中对称试件双切口拉伸法最适合实际应用.     

Defence and firm performance in the UK

The UK Ministry of Defence is British industry's largest single customer and a number of firms and industries are highly dependent on defence sales. Various hypotheses have been proposed about the impact of defence procurement on firms and these are investigated using four performance indicators: financial structure, investment, productivity and profitability. With regard to the borrowing ratio, capital investment and the rate of return, there is no statistically significant difference between the mean financial ratios for low and high dependence firms. However, non‐dependents appear to have a higher level and rate of growth of labour productivity than dependents.     

位置随动系统动态性能自动检测研究

通过分析某型位置随动系统的组成和动态技术指标,提出了位置随动系统动态性能自动检测的设计方案和测试方法,利用信号仿真模块和基于DSP的高速数据采集与处理模块,建立了自动检测的硬件电路和软件结构,确定了测试位置随动系统的动态性能指标、测试方法和软件功能,实现了对某型位置随动系统动态性能的自动检测．     

基于EMD的改进小波阈值降噪法在超声信号处理中的应用

针对超声检测回波信号中的大量噪声,分析了超声检测回波信号的特性,考虑经验模式分解（EMD）和小波哗噪的优点,在改进阈值函数基础上提出一种基于EMD的小波阈值降噪方法．该方法利用EMD对超声信号进行分解,对高频分量用改进小波阈值函数方法进行处理,再结合低频分量重构得到降噪信号．仿真实验结果表明,该方法降噪效果优于小波软、硬阂值降噪,进一步提高了重建信号的信噪比,降低了其均方根误差,是一种可行的超声信号降噪方法．     

二维超声速空气引射器启动特性试验研究

xxxx超声速引射器是高空模拟试车台的重要组件,在发动机启动前利用引射器对试验舱预抽真空可避免发动机启动初始时刻燃气漏入试验舱造成燃气在发动机中分离,对获取发动机在高空环境下的完整推力特性具有重要意义。而该工况下超声速引射器的启动过程是引射器工作过程中最为恶劣的工况,设计不合理的引射器会导致启动压力过高甚至不能实现启动。建立了缩比超声速空气引射器试验台对超声速引射器的启动特性进行研究,采用压力测量方法结合纹影技术对超声速引射器处于极限启动压比时的流场进行了描述,研究结果表明混合室收缩比越小,引射器极限启动压比越低。同时给出了定位超声速引射器不启动原因的判据：当引射器不启动是由引射总压不足引起时,盲腔压力在引射总压提高时降低,并在临界启动状态下达到最小值;而由混合室收缩比过小导致的引射器不启动在引射总压提高时盲腔压力单调上升。     

Comparison between constant‐stress and step‐stress accelerated life tests under Time Constraint

By running life tests at higher stress levels than normal operating conditions, accelerated life testing (ALT) quickly yields information on the lifetime distribution of a test unit. The lifetime at the design stress is then estimated through extrapolation using a regression model. In constant‐stress testing, a unit is tested at a fixed stress level until failure or the termination time point of test, whereas step‐stress testing allows the experimenter to gradually increase the stress levels at some prefixed time points during the test. In this work, the optimal k‐level constant‐stress and step‐stress ALTs are compared for the exponential failure data under complete sampling and Type‐I censoring. The objective is to quantify the advantage of using the step‐stress testing relative to the constant‐stress one. Assuming a log‐linear life–stress relationship with the cumulative exposure model for the effect of changing stress in step‐stress testing, the optimal design points are determined under C/D/A‐optimality criteria. The efficiency of step‐stress testing to constant‐stress one is then discussed in terms of the ratio of optimal objective functions based on the information matrix. © 2013 Wiley Periodicals, Inc. Naval Research Logistics 00: 000–000, 2013     

轻量级SpaceFibre节点高速传输系统的优化设计

为满足卫星有效载荷间SpaceFibre链路的高带宽、高可靠性和轻量化的应用需求,提出一种SpaceFibre节点传输系统的优化设计。该设计采用基于帧累计的增量化计算方法减少了计算电路的冗余;通过四级流水架构满足了错误检测操作的时序要求,使用循环冗余校验共享机制平衡了硬件资源的使用;采取基于完整应答的双层控制策略提升了系统的可靠性,通过构建面向资源优化的控制状态机和存储架构简化了确认重传算法的实现逻辑。使用型号为XC7Z100FFG900-2的FPGA搭建双节点系统,板级验证表明:该设计满足协议规范,与同类设计方案相比,最高工作频率提高1.5倍,支持最高6.25 Gbit/s的传输速率,查找表资源和存储资源降低,寄存器资源相近,为开发具有自主知识产权的高速可靠SpaceFibre编解码器提供了参考。