月壤参数对月面着陆气囊缓冲性能的影响

为研究月壤参数对气囊缓冲性能的影响,根据“嫦娥三号”的着陆工况设计了月面着陆气囊,并基于可压溃泡沫模型建立了考虑月壤特性的气囊缓冲动力学模型。对不同月壤下气囊的缓冲过程进行分析,发现月壤越软有效载荷冲击加速度越小,但气囊会陷入月壤中,不利于对外排气,影响其缓冲效果。因此,采用气囊峰值压力、有效载荷最大加速度和最大下落高度3个指标对气囊缓冲性能进行综合评价,定量研究了月壤参数的影响规律。结果表明:月壤密度、剪切模量及屈服参数a₀和a₁对缓冲性能的影响较大,且对前两个指标为正影响,对后一个指标为负影响。进一步研究发现,这4个月壤参数与3个缓冲性能指标之间〖BHDWG8,WK10YQ,DK1*2,WK1*2D〗〖XCZX.TIF;%129%129〗听语音 聊科研与作者互动 均为指数函数关系。     

节点实时性能自适应的集群资源分配算法

由于配置和所运行作业的不同,集群各节点的实时性能差异较大。为提高集群性能,提出节点实时性能自适应的集群资源分配算法 (node real-time performance adaptive cluster resource scheduling algorithm,NPARSA)。节点实时性能用其配置(CPU核数及速度、内存容量、磁盘容量)和实时状态参数(CPU、内存和磁盘的剩余数量及磁盘读写速度)表示。NPARSA根据作业类型自主选择节点性能评价指标的权值,实现节点实时性能对于作业类型的自适应。实时性能最优的节点分配给作业。虚拟机实验和物理集群实验表明,与Spark默认资源分配算法、没有考虑作业类型与节点匹配的算法、使用作业和节点匹配差异程度作为资源分配依据的算法相比,NPARSA能更有效地缩短作业执行时间、提高集群性能。     

Thermal hazard assessment of TKX-50-based melt-cast explosive

In the present study, thermal hazards of TNT and DNAN used as the molten binder in TKX-50-based melt-cast explosives were comparatively studied through accelerating rate calorimeter (ARC) and Cook-off experiments. Two kinds of ARC operation modes were performed to investigate the thermal safety performance under adiabatic conditions (HWS mode) and constant heating (CHR mode). The obtained results demonstrated that at both heating modes, DNAN/TKX-50 outperformed TNT/TKX-50 from the thermal safety point of view. However, the sensitivity to heat of the samples was reverse because of the different heating modes. In addition, the results of thermal hazard assessment obtained from the cook-off experiment complied with ARC analysis which indicated the molten binder TNT replaced by DNAN would reduce the hazard of the TKX-50 melt cast explosive. Furthermore, the results of cook-off experiments also showed that DNAN/TKX-50 outperformed TNT/TKX-50 from the aspect of thermal stability, which was consistent with the result of CHR mode because of the similar heating process.     

Analysis on damage characteristics and detonation performance of solid rocket engine charge subjected to jet

To further explore the damage characteristics and impact response of the shaped charge to the solid rocket engine (SRE) in storage or transportation, protective armor was designed and the shelled charges model (SCM)/SRE with protective armor impacting by shaped charge tests were conducted. Air overpressures at 5 locations and axial acceleration caused by the explosion were measured, and the experimental results were compared with two air overpressure curves of propellant detonation obtained by related scholars. Afterwards, the finite element software AUTODYN was used to simulate the SCM impacted process and SRE detonation results. The penetration process and the formation cause of damage were analyzed. The detonation performance of TNT, reference propellant, and the propellant used in this experiment was compared. The axial acceleration caused by the explosion was also analyzed. By comprehensive comparison, the energy released by the detonation of this propellant is larger, and the HMX or Al particles contained in this propellant are more than the reference propellant, with a TNT equivalent of 1.168–1.196. Finally, advanced protection armor suggestions were proposed based on the theory of woven fabric rubber composite armor (WFRCA).     

钢丝增强复合条带抗弹性能数值分析

为研究钢丝增强聚合物基复合条带的抗弹性能,基于冲击动力学理论分析其抗弹机理,再借助ANSYS/LS-DYNA软件和LS-PrePost前后处理器模拟有无增强钢丝2种工况下,条带对7.62 mm弹体的冲击响应。分析表明：条带的弹性模量、剪切模量和面密度会影响其能量吸收性能,能量吸收量随三者的增大而增大;由于聚合物基体的正交各向异性,应力云图显示出扁平椭圆状是合理的;在聚合物基复合条带中嵌入增强钢丝对条带整体的抗弹性能有积极的影响,但嵌入过量的钢丝会导致重量和成本的增加,因此需要对合理的钢丝配比率作进一步研究。研究结果可为钢丝增强聚合物基复合条带在野战防护结构中的应用提供参考。     

目标识别中的传感器管理方法

基于假设检验的方法,研究了目标识别中的传感器管理方法。分别以用于假设检验问题中的最大后验概率、最小代价函数和最大正确检测概率为目标函数,给出了用于目标识别问题的多传感器管理方法,并针对目标识别问题的特点,对其进行了相应的改进。通过对一定场景的仿真,比较了三种不同方法的识别正确率和平均采样次数,分析了各种方法的特点。     

航空电子总线测试系统的设计与实现

现代航空电子综合化系统通常建立在M IL-STD-1533B多路传输数据总线通信网络基础之上,总线控制器(BC)和各个远程终端(RT)必须满足M IL-STD-1553B规定的各项协议指标要求,才能正确地联网通讯。讨论了某型航空电子总线测试系统的设计与实现,主要探讨了此系统的软、硬件开发,系统组成及其BC和RT有效性测试的主要内容和要求。在实际应用中收到了很好的效果。     

基于假设检验的编队组织决策设计

从集中式和分散式组织结构分析出发,采用假设检验的方法,探讨了分布式结构假设检验在海军舰艇编队环境评估中的组织决策设计,并从决策设计和算法上对其进行了复杂性分析.研究结果表明,基于假设检验的组织决策是一个NP问题,就存在的问题提出算法和组织设计研究的思路.     

军用软件的测试与实践方法

首先分析了民用软件存在的问题,然后结合军用软件的特点,对影响军用软件可靠性的因素进行分析,最后提出提高军用软件质量的几种测试与实践方法.     

二维拉格朗日和欧拉结合法在流处理器MASA上的实现与评测

现代半导体工艺技术的发展使得在单芯片上放置数百个运算单元成为可能,但是全局片上片外带宽受限。通用处理器体系结构不能较好地适应变化,仍然依靠全局片上结构,少量的运算单元。而流体系结构拥有大量的运算单元、鲜明的存储层次,使得在有限的片外带宽下,用高的本地带宽来满足大量运算单元的需求。首先介绍了原型MASA流体系结构,然后给出了爆轰流体力学中的二维拉格朗日和欧拉结合法(Ygx2)在流体系结构上实现的实例研究,最后用时钟精确的模拟器来评测应用的运行性能,结果表明Ygx2应用在500MHz的MASA上运行结果与1.6GHz的Iantium2的比较快近4倍,证实了流体系结构在高性能计算领域的极大潜力。