一种鱼雷辐射噪声的线谱估计方法

基于鱼雷辐射噪声的物理特性和线谱特征,探讨了一种鱼雷目标特征提取方法。该方法结合经典谱与现代谱估计,提取水下目标辐射噪声线谱特征。通过两次估计采集数据的功率谱,得到估计算法功率谱图,然后分析功率谱图,先确定线谱存在的大致区域,再估计精确线谱。进行仿真研究,得到了较好的效果,证明该方法对低频段的线谱特征提取有很好的实用性。     

Compensating military veterans in South Africa

This article outlines the widespread needs of South African military veterans and the possible consequences if the promises made in the recent Military Veterans Act are not met. The first part of the article defines who generally qualifies as a military veteran, how they are typically compensated in various countries with specific reference to neighbouring southern African countries, and what the consequences are when veterans become disenchanted with the state. The second part focuses on South Africa and the recent debates on military veterans and their entitlements. With reference to the findings of a qualitative study conducted among military veterans, parliamentary debates and media reports, an assessment is made of the demands and affordability of promised benefits and the consequences should the state not deliver. The conclusion is reached that heightened expectations are presently frustrated by slow roll-outs, and this is likely to increase the possibility of protest action. This has now the potential to create further tension within the ruling party and civil society, as the pressure on public finances mounts and demands become unsustainable. The effect this may have on political stability will depend on how the government manages this issue.     

预定相遇态势的潜射鱼雷射击及其技术方法

为发挥鱼雷的作战效能,提出潜射鱼雷有利相遇态势的概念,指出当一次转角射击不能满足鱼雷以有利相遇态势接近并发现目标时,各种自导方式的鱼雷均需要二次转角射击。在给出二次转角射击时机、解算模型的基础上,着重对预定相遇态势射击的关键----二次转向点的选择问题进行了系统研究,引入基于鱼雷自导探测距离的二次转向点与预定相遇点之间距离的选择方法,使得二次转向点的选择更具合理性和针对性,且适用于包括直航鱼雷在内的各种鱼雷。     

机动飞行条件下基于SIFFBP算法的机载UWB SAR成像

机动飞行条件下,运动误差的幅度较大,频域运动补偿精度难以满足机载超宽带合成孔径雷达(UWB SAR)高精度成像的要求,需要采用精确的时域后向投影(Back Projection,BP)算法,然而原始BP算法的巨大计算量限制了其实际应用。提出了一种基于子图像快速因式分解BP(Sub-image Fast Factorized BackProjection,SIFFBP)算法的机动飞行条件下机载UWB SAR成像方案,并对其子孔径和子图像划分的约束关系进行了推导,给出了算法步骤,并分析了算法的计算量。仿真和实测数据处理结果表明,SIFFBP算法能够在保证处理精度的同时,大幅度提高处理效率,非常适合于机动飞行条件下的机载UWB SAR成像处理。     

基于ARMA辨识的色噪系统状态参数鲁棒估计

实际环境中观测系统的噪声,同时存在着白噪、色噪声和尖点噪声的影响.已有的研究都仅考虑白噪或色噪声,首次将实际系统中可能出现的所有噪声纳入观测方程,推导出统一的带白噪形式的观测方程.新观测方程在色噪声ARMA辨识基础上,可以直接用于传统的卡尔曼滤波算法,避免了扩维滤波.于是状态参数的稳健估计归结为ARMA参数的辨识.重点研究了自由参数选取与输入噪声之间的关系,将鲁棒支持向量回归机的优化问题转换成最大后验估计问题,为合理选择自由参数提供了理论依据.仿真结果验证了新算法的有效性.     

四阶累积量的MIMO雷达角度估计算法

针对色噪声环境下的MIMO雷达目标角度估计问题,提出一种新的参数估计算法.通过计算MIMO雷达接收数据的四阶累积量,并对构造出的累积量矩阵进行特征分解,结合MUSIC算法和ESPRIT算法实现了雷达目标的角度估计.在保证阵元扩展能力和目标分辨力的基础上进行了低复杂度改进,去掉了冗余信息,实现了目标参数的有效估计;同时由于采用四阶累积量,提高了算法抑制高斯噪声的能力,更利于工程应用.最后计算机仿真结果证实了算法的有效性和可行性.     

色噪声环境下MIMO雷达相干目标角度估计算法

针对色噪声环境下的MIMO雷达相干目标角度估计问题,提出一种基于目标信息矢量重构的角度估计算法.算法对MIMO雷达的接收数据进行了低复杂度改进,通过计算四阶累积量,得到一组矢量并证明该矢量包含所有目标的角度信息,通过重构Toeplitz矩阵,结合MUSIC算法实现了色噪声环境下MIMO雷达相干目标的角度估计.算法保留了MIMO雷达的阵元扩展能力和目标分辨力,具有自动抑制加性高斯白噪声和色噪声的能力,实现了相干目标的有效估计,更利于在实际中应用.最后计算机仿真结果证实了算法的有效性和可行性.     

Formation of adiabatic shearing band for high-strength Ti-5553 alloy: A dramatic thermoplastic microstructural evolution

By using split Hopkinson pressure bar, optical microscopy and electronic microscopy, we investigate the influence of initial microstructures on the adiabatic shear behavior of high-strength Ti–5Al–5V–5Mo–3Cr (Ti-5553) alloy with lamellar microstructure and bimodal microstructure. Lamellar alloy tends to form adiabatic shearing band (ASB) at low compression strain, while bimodal alloy is considerably ASB-resistant. Comparing with the initial microstructure of Ti-5553 alloy, we find that the microstructure of the ASB changes dramatically. Adiabatic shear of lamellar Ti-5553 alloy not only results in the formation of recrystallized β nano-grains within the ASB, but also leads to the chemical redistribution of the alloying elements such as Al, V, Cr and Mo. As a result, the alloying elements distribute evenly in the ASB. In contrast, the dramatic adiabatic shear of bimodal alloy might give rise to the complete lamination of the globular primary α grain and the equiaxial prior β grain, which is accompanied by the dynamic recrystallization of α lamellae and β lamellae. As a result, ASB of bimodal alloy is composed of α/β nano-multilayers. Chemical redistribution does not occur in ASB of bimodal alloy. Bimodal Ti-5553 alloy should be a promising candidate for high performance armors with high mass efficiency due to the processes high dynamic flow stress and excellent ASB-resistance.     

One size does not fit all: personalized incentives in military compensation

A critical element in implementing a compensation scheme including nonmonetary incentives (NMIs) is recognizing that preferences vary widely across Service members. There are at least three sources of variability: across different population classes, across individuals within a population class, and across NMI packages for a particular individual. Surveys across different military communities, ranks, and years of Service show the difficulty of identifying any NMI that has significant value for even 50% of the active duty force. At the same time, approximately 80% of the surveyed Service members expressed a significant positive value for at least one NMI. Therefore, one-size-fits-all incentive packages will not be nearly as effective as more personalized incentive packages. The authors discuss variability in Service member NMI preferences and outline an approach to implementing personalized NMI packages in military compensation through a sealed-bid reverse auction, where Service members select individual NMIs from a “cafeteria-style” menu of options.     

抑制成像数据噪声的模糊多目标算法

以模糊数学和决策理论为基础,通过建立成像数据模糊指数函数及平方误差 模糊指数函数,提出了一种称为模糊多目标优化的新的算法模型,对成像数据的噪声进行抑 制实现数据优化。实验结果表明,所提出的模糊多目标优化算法模型有较强的抑制噪声能 力,理论和实验有较好的一致性。