海战潜艇兵力作战任务聚合、解聚与重构实现

根据海战仿真对潜艇作战仿真的多分辨率需求,采用聚合与解聚的方法对潜艇智能兵力作战行为模型进行层次划分和结构化设计,利用J2EE/EJB组件建模技术构建了潜艇智能兵力作战行为仿真组件模型,通过行为决策模型构建和多分辨率接口设计,对兵力作战任务进行解聚和聚合,仿真不同分辨率下的作战任务行为和作战指标,并通过任务行为决策控制参数调整实现兵力作战行为重构,满足了系统对智能兵力作战行为多分辨率建模和战法战术验证的功能需求,并有效提高了模型利用效率和可重用性。     

基于锥形量热法的油池火相似性及点火特性模拟实验

针对油料池火灾相似性及点火特性研究需要,构建了一种基于耗氧原理的油池火锥形量热法模拟实验系统,引入火灾尺度相似性概念,研究了实验室尺度油池火与真实尺度油池火的相似性关系,探讨了实验室尺度油池火预测真实尺度油池火的可行性,基于实验室尺度锥形量热法研究了油池火点火特性,得到了辐射强度、辐射距离对油料点燃时间的影响规律以及点燃时间与锥照射强度之间的拟合公式。     

激励器结构参数对合成射流影响的试验研究

为了设计高性能的合成射流激励器,实验采用热线风速仪测量激励器出口的流动速度,对不同大小激励器、不同出口形状激励器、单 双膜激励器以及金属振动膜处于不同装配受压状态下的激励器分别进行了试验。实验结果显示:激励器的结构决定了合成射流激励器的性能;激励器出口射流平均速度除了与激励器大小、出口面积有关外,还与出口形状有关,采用方孔 矩形孔形式的开口有利于建立较强的合成射流;双膜与单膜工作相比,合成射流最大速度基本上是成两倍关系;金属振动膜的安装形式(受压状态)不影响合成射流随频率的变化规律,但对合成射流速度影响很大,当激励器振动膜处于螺栓拧紧受压状态时,与振动膜不受压状态相比,合成射流出口速度几乎下降了一个数量级。     

基于Kriging模型的环形桁架可展天线结构参数优化方法

针对传统结构动力学优化过程中求解效率较低的问题,以环形桁架可展天线结构参数优化为研究背景,在环形桁架可展天线结构的参数变量空间中,以试验设计方法选取样本点,通过有限元方法得到各个样本点的第一阶固有频率、固定载荷最大变形等响应值,利用样本点和响应值的关系建立Kriging近似模型进行优化算法的寻优,得到满足所有约束条件的最优解。结果表明,所得到的环形桁架可展天线第一阶固有频率、固定载荷最大变形的响应面呈现比较明显的非线性关系,基于Kriging模型的结构优化方法能比较准确地对环形桁架可展天线进行寻优设计。     

Pressure relief of underground ammunition storage under missile accidental ignition

Safety of underground ammunition storage is an important issue, especially during the accidental ignition of missiles. This work investigates the pressure and temperature distribution of the multi-layer underground ammunition storage with a pressure relief duct during the accidental ignition process of the missile. A large-scale experiment was carried out using a multi-layered restricted space with a pressure relief duct to simulate the underground ammunition store and a solid rocket motor to simulate the accidental ignition of the missile. The results show that when the motor gas mass flow increased by 5.6 times, the maximum pressure of the ammunition storage increased by 5.87 times. At a certain motor flow rate, when the pressure relief exhaust area at the end of the relief duct was reduced by 1/2, the maximum pressure on the first layer did not change. But the rate of pressure relief was reduced and the time delayed for the pressure of ammunition store to drop to zero. In this experiment, when the motor ignition position was located in to the third layer ammunition chamber, the maximum pressure was reduced by 32.9％ and also reduced the rate of change of pressure. In addition, for the experimental conditions, the theoretical analysis of the pressure relief of the ammunition storage is given by a simplified model. Based on the findings, some suggestions to the safety protection design of ammunition store are proposed.     

OFDM/OQAM系统信道估计改进方法

在基于导频的信道估计方法中,伪导频的功率决定了该信道估计方法的性能.为了提高OFDM/OQAM系统的信道估计精度,提高频谱效率,提出一种基于改进导频结构的信道估计方法.在原有导频结构的基础上,对其中功率最高的导频结构进行改进,并给出对应的信道估计方法.由于缺乏足够的接收信号先验知识,无法直接对信道进行估计.为了解决这一...