救生伞背带参数对假人动载的影响研究

针对救生伞假人高速开伞空投试验,建立降落伞-背带-假人系统的动力学模型,分析背带及脱离锁参数对假人质心过载的影响。在合理简化的基础上,采用多体动力学方法建立降落伞、背带脱离锁和假人的十五自由度动力学模型;采用质量-阻尼弹簧模型建立背带模型,连接降落伞、脱离锁和假人;利用实测过载计算降落伞开伞力。利用所建立的动力学模型仿真典型状态下假人和背带的动力学响应,验证所建立模型的合理性。分析脱离锁位置、背带松紧程度、背带材料特性对假人质心最大过载的影响,用于指导背带设计以及确定最佳的背带脱离锁位置。     

救生伞背带分系统对假人动载的影响

为了改善救生伞背带分系统的安全性,建立降落伞-背带-假人系统的动力学模型,分析背带及脱离锁参数对假人质心过载的影响。针对救生伞假人高速开伞空投试验,采用多体动力学方法建立降落伞、背带脱离锁和假人的十五自由度动力学模型;采用半质量-阻尼弹簧模型建立背带模型,连接降落伞、脱离锁和假人;利用实测过载计算降落伞开伞力。利用所建立的动力学模型仿真典型状态下假人和背带的动力学响应,验证所建立模型的合理性。分析了脱离锁位置、背带松紧程度、背带材料特性对假人质心最大过载的影响,可用于指导背带设计以及确定最佳的背带脱离锁位置。     

Dynamic routing of prioritized warranty repairs

Recent years have seen a strong trend toward outsourcing warranty repair services to outside vendors. In this article we consider the problem of dynamically routing warranty repairs to service vendors when warranties have priority levels. Each time an item under warranty fails, it is sent to one of the vendors for repair. Items covered by higher priority warranty receive higher priority in repair service. The manufacturer pays a fixed fee per repair and incurs a linear holding cost while an item is undergoing or waiting for repair. The objective is to minimize the manufacturer's long‐run average cost. Because of the complexity of the problem, it is very unlikely that there exist tractable ways to find the optimal routing strategies. Therefore, we propose five heuristic routing procedures that are applicable to real‐life problems. We evaluate the heuristics using simulation. The simulation results show that the index‐based “generalized join the shortest queue” policy, which applies a single policy improvement step to an initial state‐independent policy, performs the best among all five heuristics. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

引入电流变化率的电源分布网络最差噪声分析算法

随着时钟频率的增加以及电源电压的降低,电源完整性问题日益凸显。将电流变化率加入到最差噪声算法的电流约束中,能够在任意电流变化率的情况下分析电源分布网络的最差噪声,从而获得更加真实的最差噪声。另外,利用改进的Knuth-Yao四边形不等式法对基于动态规划的最差噪声算法进行加速,加速后算法的时间复杂度从O(n~2m)降为O(mnlogn)。     

一种改进的量子粒子群算法

量子粒子群算法是将量子计算与粒子群算法相结合的一种新的优化方法。首先利用相位角进行实数编码,将动态量子旋转门引入到粒子群算法中,采用自适应变异,提出了一种改进的量子粒子群算法。然后运用Pe-nalized函数和Ackley函数测试了该算法的性能。最后将该算法应用到武器目标分配模型中,获得了最优的分配方案。仿真研究表明,该算法具有收敛速度快、搜索能力强和稳定性高的特点。     

基于自适应EKF的高动态载波跟踪算法

针对载波跟踪算法在大频偏或动态剧烈变化时易失锁的问题,提出一种无数据辅助情况下基于自适应R/Q扩展卡尔曼滤波(AEKF)的高动态载波跟踪算法。该算法在AEKF代替鉴相器和滤波器的环路结构基础上,引入两倍相位转换来消除数据位跳变的影响,并利用载噪比估计方法和基于加加速度的信号动态监测方法来修正观测噪声协方差(R)和系统状态噪声方差(Q),进而兼顾环路的跟踪精度和动态稳定性。实验结果表明:利用该算法的GPS软件接收机能够在加速度200 g,瞬间加加速度10 000 g/s的动态指标下正常工作。     

基于规则的动态频谱接入研究

动态频谱接入面临的关键技术之一是对接入时机和方式进行有效地管控,防止由于频谱的接入使用过于灵活造成用频的干扰和混乱。将频谱接入的时间和方式给予规则上的约束和指导,基于规则构建动态频谱管理框架可以有效实现频谱的实时管控。对动态频谱接入的规则及表述方式进行了讨论,分析了基于规则的动态频谱接入过程,最后结合美军XG项目的试验结果分析了基于规则的动态频谱接入的应用前景。     

Parallel machine scheduling with batch deliveries to minimize total flow time and delivery cost

Motivated by the flow of products in the iron and steel industry, we study an identical and parallel machine scheduling problem with batch deliveries, where jobs finished on the parallel machines are delivered to customers in batches. Each delivery batch has a capacity and incurs a cost. The objective is to find a coordinated production and delivery schedule that minimizes the total flow time of jobs plus the total delivery cost. This problem is an extension of the problem considered by Hall and Potts, Ann Oper Res 135 (2005) 41–64, who studied a two‐machine problem with an unbounded number of transporters and unbounded delivery capacity. We first provide a dynamic programming algorithm to solve a special case with a given job assignment to the machines. A heuristic algorithm is then presented for the general problem, and its worst‐case performance ratio is analyzed. The computational results show that the heuristic algorithm can generate near‐optimal solutions. Finally, we offer a fully polynomial‐time approximation scheme for a fixed number of machines. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 492–502, 2016     

Decomposing inventory routing problems with approximate value functions

We present a time decomposition for inventory routing problems. The methodology is based on valuing inventory with a concave piecewise linear function and then combining solutions to single‐period subproblems using dynamic programming techniques. Computational experiments show that the resulting value function accurately captures the inventory's value, and solving the multiperiod problem as a sequence of single‐period subproblems drastically decreases computational time without sacrificing solution quality. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

新型微小管道机器人驱动特性分析

研制了一种具有"大驱动、快速、长距离运动"综合性能的新型微小管道机器人。机器人采用电机驱动蠕动式爬行方案,主要包括自调节支撑机构、柔性保持机构、软轴驱动机构、卸载机构等,适用于直径为15~20mm的微细管道。在介绍了工作原理及机构组成的基础上,对各机构的力学特性进行了分析。虚拟仿真和样机试验表明,机器人能顺利通过曲率半径不小于80mm的弯管,移动速度为8~10mm/s,具有0~90°爬坡能力,可双向移动,其负载能力不小于10N,载重自重比可达6.67∶1。