梁在拉伸力和弯曲力矩联合作用下的动态塑性断裂

本文采用刚塑性分析方法,研究了韧性材料带裂纹有限长梁在轴向拉伸力和弯曲力矩联合作用下的全塑性断裂过程,其外加轴向拉伸力和弯曲力矩为准静态加载,并在梁的断裂过程中保持不变,为定常载荷。在外力作用下,梁的断裂截面首先进入塑性变形,当裂纹尖端张开位移 CTOD 达到其材料临界值时,裂纹将启裂扩展。本文考虑了应变率对断裂过程的影响,给出了梁在断裂过程中其裂纹扩展长度,裂纹扩展速度以及断裂截面上的轴向抗力和弯曲抗力随时间的变化规律,并比较了在不同轴向拉伸力作用下梁的动态塑性断裂过程的变化,说明了轴向作用力对梁的断裂过程的影响。     

点火瞬态过程对复合固体推进剂力学响应特性的影响

根据一个有效的非线性粘弹模型,导出复合固体推进剂微分形式本构方程和应变速率关系式。分析表明点火瞬态过程中压强与推进剂应变、升压速率与推进剂应变速率之间呈线性关系,线性系数均为推进剂初始模量。     

Theoretical design of new bridge-ring insensitive high energy compounds by selected normal Diels-Alder reactions between NH2-substituted oxazoles and NO2/NF2/NHNO2-substituted ethylenes/acetylenes

In this work, NH₂-substituted oxazoles and NO₂/NF₂/NHNO₂-substituted ethylenes/acetylenes were designed and used as dienes and dienophiles, respectively, in order to develop new bridge-ring insensitive high energy compounds through the Diels-Alder reaction between them. The reaction type, reaction feasibility and performance of reaction products were investigated in detail theoretically. The results showed that dienes most possibly react with dienophiles through the HOMO-diene controlled normal Diels-Alder reaction at relatively low energy barrier. Tetranitroethylene could react with the designed dienes much more easily than other dienophiles, and was employed to further design 29 new bridge-ring energetic compounds. Due to high heat of formation, density and oxygen balance, all designed bridge-ring energetic compounds have outstanding detonation performance, 16 of them have higher energy than HMX (1,3,5,7-tetranitro-1,3,5,7-tetrazocine) and 2 others even possess comparative energy with the representative of high energy compounds CL-20 (2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane). The predicted average h₅₀ value of these bridge-ring energetic compounds is 83 cm, showing their low impact sensitivity. The NH₂ groups could obviously impel the proceeding of Diels-Alder reactions, but would slightly decrease the energy and sensitivity performance. In all, the new designed bridge-ring compounds have both high energy and low sensitivity, and may be produced through Diels-Alder reactions at relatively low energy barrier. This paper may be helpful for the theoretical design and experiment synthesis of new advanced insensitive high energy compounds.     

Dynamic necking of a near α titanium alloy at high strain rates:Experiments and modelling

The tensile behaviour of near α Ti3Al2.5 V alloy, conceived for applications in aerospace and automotive engineering, is characterized from quasi-static to high strain rates. The material is found to present noticeable strain rate sensitivity. The dynamic true strain rate in the necking cross-section reaches values up to ten times higher than the nominal strain rate. It is also observed that beyond necking the dynamic true stress-strain curves present limited rate dependence. The experimental results at different strain rates are used to determine a suitable constitutive model for finite element simulations of the dynamic tensile tests. The model predicts the experimentally macroscopic force-time response, true stress-strain response and effective strain rate evolution with good agreement.     

Damage to aircraft composite structures caused by directed energy system: A literature review

This paper presents a comprehensive review of the research studies on direct energy system effect on aircraft composite structures to develop a good understanding of state-of-the-art research and devel-opment in this area. The review begins with the application of composite materials in the aircraft structures and highlights their particular areas of application and limitations. An overview of directed energy system is given. Some of the commonly used systems in this category are discussed and the working principles of laser energy systems are described. The experimental and numerical studies re-ported regarding the aircraft composite structures subject to the effect of directed energy systems, especially the laser systems are reviewed in detail. In particularly, the general effects of laser systems and the relevant damage mechanisms against the composite structures are reported. The review draws attention to the recent research and findings in this field and is expected to guide engineers/researchers in future theoretical, numerical, and experimental studies.     

涡轮泵故障检测的频段能量比SOM算法

为了解决缺少故障样本情况下的涡轮泵健康状态判别问题,分析了涡轮泵振动信号的频谱,提取了频段能量比作为其故障检测特征,并讨论了自组织映射的竞争学习原理及聚类结果的U-矩阵表示,提出了一种基于频段能量比的自组织映射故障检测算法,并实现了该算法最佳匹配神经元的选择和权重向量的自适应更新。通过某型液体火箭发动机历史试车数据的验证,结果表明,健康涡轮泵数据利用该算法聚类时仅存在一个类别,相邻神经元距离小于0.1;反之,故障涡轮泵数据利用该算法聚类时明显存在两个或多个类别,且相邻神经元的最大距离大于0.1。因此,基于频段能量比的SOM算法能有效地判别涡轮泵的健康状况。     

机械法超细粉碎技术

固体物料经超细粉碎,可以改善其物理化学性质,提高应用性能．机械法超细粉碎技术成熟,易实现工业化,而且生产能力大,成本低．介绍了机械法超细粉碎设备,重点介绍了气流粉碎机,包括工作原理、特点,机计、注意事项,在农药、食品工业的典型应用,并对其在国防工业的应用作了展望．     

水蒸发冷却空调在班用帐篷中的应用研究

通过介绍西北地区班用帐篷夏季降温用水蒸发冷却空调器的设计过程及基本原理,分析得出结论：水蒸发冷却空调在西北干旱地区班用帐篷中的应用潜力巨大。     

反导动能拦截武器的现状与发展研究

介绍了动能拦截弹在弹道导弹防御中的应用,分助推段拦截、中段拦截、末段拦截对美国发展的动能拦截武器进行了详细说明。介绍了动能拦截弹的组成,给出了动能拦截器的关键技术,对动能拦截器技术的发展进行了阐述。     

一种面向节点定位的移动信标动态路径规划方法

针对基于移动信标的传感器节点定位问题,提出一种基于在线决策的移动信标动态路径规划方法.针对以往算法大都只适用于节点均匀分布的局限,该方法用移动信标不断获取两跳范围内的未定位节点数目,并向最大覆盖未定位节点方向移动,不需要网络先验信息,即可实现路径的优化.仿真结果表明:与传统方法相比,该方法无需网络的先验信息,在移动路径长度上具有明显优越性,减少了信标的能量消耗,更适用于户外部署的大规模传感器网络.