粉末涂料聚酯树脂性能研究

在合成粉末涂料聚酯树脂配方中,着重研究了醇、酸对聚酯树脂玻璃化温度的影响,同时将合成产品进行表征,结果表明,合成产品的主要性能指标与国际同类产品相近。     

球磨时间对纳米SiO_2/Cu复合材料摩擦学性能的影响

采用球磨法与热压烧结工艺制备了添加w（n-SiO2）=1.0%的铜基纳米复合材料。通过球盘式摩擦磨损试验机测试了复合材料的摩擦磨损性能,采用排水法和场发射扫描电镜（FSEM）研究了复合材料的致密度、显微组织和磨损形貌。结果表明：球磨可提高复合材料的致密度,改善n-SiO2在铜基体中的分散均匀性;随球磨时间的增加,复合材料的动摩擦因数和磨损量先减小后增加,球磨10 h复合材料具有较低的摩擦因数和磨损量,磨损机理主要为磨料磨损。     

华东烧结模型的数学计算(I)

利用热力学分析和数学计算,给出颗粒表面能的表达式,依此讨论了颗粒的２种典型堆集和华东烧结模型中膨胀机制与收缩机制对烧结体总表面能的作用效果,为工程应用提供依据。     

铁粉焊条熔化过程中基本参数研究

通过试验研究了焊条直径和铁粉加入量对焊条熔化参数的影响.试验结果表明,焊条直径增加,焊条药皮重量系数、熔敷效率增加,熔化速度和熔敷速度降低;熔敷金属中合金元素Mn、Si含量增加,但Mn、Si的过渡系数减小.当增加药皮中铁粉加入量,药皮重量系数、熔敷效率和熔敷速度增加,熔化速度降低,由于铁粉的稀释作用使熔敷金属中合金元素Mn、Si含量及过渡系数降低.     

Flintlock brass fittings from the 19th-century Akko 1 shipwreck,Israel

The Akko 1 shipwreck is the remains of a 26-metre-long Egyptian armed vessel or auxiliary naval brig built at the beginning of the 19th century. Remains of six flintlock muskets were retrieved from the shipwreck, and characterised by various metallurgical methods. The research aimed to study the composition and microstructure of the musket fittings and their manufacturing processes, and if possible, to determine the date and origin of the raw materials. The lead isotope analysis of the fittings suggests that their raw material originated in Great Britain. Based on their typology and composition, the fittings were made in Great Britain of brass alloy and manufactured by casting, probably at the same workshop; and the staple was manufactured by casting and drawing. Considering the zinc content, combined with the manufacturing techniques, the fittings were manufactured between the latter part of the 18th and the early 19th centuries, which might indicate that they were purchased in the course of 19th century weapons trade to be used on board the Egyptian ship.     

铜冶炼炉溜槽上方钢梁温度分布研究

为了对有色冶炼厂房框架钢梁耐火稳定性评估提供条件,根据冶炼铜实际工况建立计算模型,数值研究钢梁温度分布,结果表明:在加热初期,钢梁的平均温度和最高温度不断上升,经历10个升温-降温周期后,钢梁的最高温度稳定在220℃左右。钢梁温度与梁的截面尺寸和形状、梁计算截面位置、溜槽与梁相对位置等众多因素有关。梁与溜槽距离越大,梁截面高度越大,翼缘宽度越小,最高温度与平均温度越低;梁长度大小不影响梁最高温度,但梁长度越大平均温度越低。     

钛酸酯偶联剂在铜-环氧屏蔽导电涂料中的用量研究

应用化学键理论,在前人提出的理论模型基础上,考察了一种复合单烷氧型钛酸酯偶联剂在铜-环氧屏蔽导电涂料中的最佳用量问题,结果表明理论值和试验值有很大差别,并对此进行了分析。     

燃烧型焊条焊接A3钢的研究

基于燃烧合成技术的燃烧机理,结合焊接母材的材质,制备可用于手工施焊的燃烧型焊条焊接A3钢。对焊接试件进行力学性能测试和金相分析,结果表明:焊接试件的结合方式为冶金结合,焊缝合金在细晶强化和弥散强化的作用下,试件的抗拉强度(σb)达到370 MPa,抗弯强度(σf)达到1 100 MPa,成功实现了燃烧型焊条对A3钢的焊接。     

Micromechanical simulation and experimental investigation of aluminum-based nanocomposites

Ceramic reinforced metal matrix nanocomposites are widely used in aerospace and auto industries due to their enhanced mechanical and physical properties. In this research, we investigate the mechanical properties of aluminum/Nano-silica composites through experiments and simulations. Aluminum/Nano-silica composite samples with different weight percentages of silica nanoparticles are prepared via powder metallurgy. In this method, Nano-silica and aluminum powders are mixed and compressed in a mold, followed by sintering at high temperatures. Uniaxial tensile testing of the nanocomposite samples shows that adding one percent of Nano-silica causes a considerable increase in mechanical properties of nanocomposite compared to pure aluminum. A computational micromechanical model, based on a representative volume element of aluminum/silica nanocomposite, is developed in a commercial finite element software. The model employs an elastoplastic material model along with a ductile damage model for aluminum matrix and linear elastic model for nano-silica particles. Via careful determination of model parameters from the experimental results of pure aluminum samples prepared by powder metallurgy, the proposed computational model has shown satisfactory agreement with experiments. The validated computational model can be used to perform a parametric study to optimize the micro-structure of nanocomposite for enhanced mechanical properties.     

悬挂式脉冲水干粉复合灭火技术及其产品研究

多相复合灭火技术能克服细水雾、超细干粉、惰性气体等灭火技术在灭火介质单独应用时存在的不足,介绍了悬挂式脉冲水干粉复合灭火装置,该产品基本性能检测和电气柜实体火灭火试验证明,此装置可有效发挥脉冲超细干粉的化学灭火和细水雾的冷却窒息物理灭火的灭火效能,灭火效率高,是一种新型的高效哈龙替代技术。