高功率微波对YBCO超导材料的改性

用固相反应法制备了123相YBCO超导块材。利用超导电性（Tc）测量、扫描电镜（SEM）等方法研究了高功率微波加载及退火处理对YBCO样品的影响。电阻－温度关系曲线表明,处理后的样品在超导起始转变温度Tco≈90K处由半导体型向超导转变,超导转变宽度△T增大。SEM结果显示,晶粒大大细化。作者认为,由于高功率微波对样品的瞬时高压作用,在样品中引入了阻碍磁通蠕动的钉扎中心,同时,退火处理改善了晶粒之间的弱连接,为提高临界电流密度Jc创造了条件。     

故障诊断和容错技术在控制系统中的应用研究

介绍了控制系统的故障诊断和容错控制的基本概念和任务 ,评述了故障诊断和容错控制技术所用的各种方法 ,并对故障诊断和容错控制技术在核动力装置控制系统中应用的可行性进行了探讨 .     

AR模型在陀螺仪性能故障诊断中的应用研究

对惯导系统上的陀螺仪在无故障和故障下输出的信号进行分析 ,计算出信号的特征量———均值、标准差、协方差 ,并用现代谱分析技术中参数模型功率谱分析的方法 ,建立信号的AR模型、绘出AR模型的功率谱图 ,对陀螺仪输出信号的变化进行了比较和分析 ,从而找出一种作为判断陀螺仪性能故障的依据     

弹药保障决策模型的研究

从弹药保障的工作入手 ,论述了弹药消耗预计算法 ,提出了基于存储论的弹药补充决策模型。给出了战时弹药保障的 3种策略     

Optimal material control in an assembly system with component commonality

Allocation of scarce common components to finished product orders is central to the performance of assembly systems. Analysis of these systems is complex, however, when the product master schedule is subject to uncertainty. In this paper, we analyze the cost—service performance of a component inventory system with correlated finished product demands, where component allocation is based on a fair shares method. Such issuing policies are used commonly in practice. We quantify the impact of component stocking policies on finished product delays due to component shortages and on product order completion rates. These results are used to determine optimal base stock levels for components, subject to constraints on finished product service (order completion rates). Our methodology can help managers of assembly systems to (1) understand the impact of their inventory management decisions on customer service, (2) achieve cost reductions by optimizing their inventory investments, and (3) evaluate supplier performance and negotiate contracts by quantifying the effect of delivery lead times on costs and customer service. © 2001 John Wiley & Sons, Inc. Naval Research Logistics 48:409–429, 2001     

复杂热动力装置计算机监控系统设计

给出了一般复杂热动力装置计算机监控系统的结构方案 ,讨论了系统硬件结构及配置 ,分析了系统软件结构及特点 ,阐述了复杂系统状态参数采集处理的方法以及串行数据通信的实现 ,展望了系统的应用前景和发展趋势     

Applying a bootstrap approach for setting reorder points in military supply systems

This paper develops and applies a nonparametric bootstrap methodology for setting inventory reorder points and a simple inequality for identifying existing reorder points that are unreasonably high. We demonstrate that an empirically based bootstrap method is both feasible and calculable for large inventories by applying it to the 1st Marine Expeditionary Force General Account, an inventory consisting of $20–30 million of stock for 10–20,000 different types of items. Further, we show that the bootstrap methodology works significantly better than the existing methodology based on mean days of supply. In fact, we demonstrate performance equivalent to the existing system with a reduced inventory at one‐half to one‐third the cost; conversely, we demonstrate significant improvement in fill rates and other inventory performance measures for an inventory of the same cost. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 459–478, 2000     

动圈式永磁直线直流电机的精英保留多种群遗传优化算法

为了实现陆基无人机电磁弹射器高机动性及其直线弹射电机的高功率密度,针对动圈式永磁直线直流电机,提出精英保留的多种群遗传算法(Multi-Population Genetic Algorithm with Elite Retention, MPGAER)的电机最大功率密度优化方法。以磁通密度和电流密度为约束条件,利用其搜索能力强、收敛速度快的特点优化电机的结构参数,并与磁路法初始设计结果和传统遗传算法优化结果进行比较。结果表明:与磁路法初始设计相比,MPGAER能使电机质量减少6.25%,功率密度提高10%,电机动态性能得到提高;MPGAER优化设计的电机功率密度高于遗传算法设计结果,所提方法有效地解决了在优化过程中出现易收敛于局部最优点和寻优效果差的问题。     

严寒地区消防给水存在的问题及对策

分析了我国北方寒冷地区城市市政消防给水和室外消火栓系统在实际应用中出现的问题,并结合规范与寒冷地区实际情况和历年的经验,提出了解决办法。     

压水型核反应堆功率控制系统的优化设计

在分析了压水型反应堆功率控制系统的前提下,针对其特殊的控制要求,运用基于输出反馈的次最优控制的设计方法和Matlab中的NCD模块,最终实现了系统的优化设计,并对系统进行了某一功率水平下的仿真试验和其它工况下的鲁棒性试验.结果表明,改进后的系统性能有了较大改善.