蒸汽动力装置分布式控制系统可靠性设计准则

讨论了为保证蒸汽动力装置分布式控制系统的可靠性所采取的一般技术 ,详细分析了提高蒸汽动力装置分布式控制系统可靠性的一般设计准则 ,包括系统设计的一般要求、计算机的选型、元器件的选择与使用以及抗干扰措施     

起步过程中离合器半接合点的试验研究

离合器接合过程半接合点的确定和控制参数的选取是提高自动变速车辆起步品质的关键。在试验的基础上 ,得出了离合器半接合点的变化特点 ,选择以离合器主、被动轴转速差Δnec作为控制参数使车辆的起步过程具有一定的自适应性。     

Designing a screening experiment for highly reliable products

Within a reasonable life‐testing time, how to improve the reliability of highly reliable products is one of the great challenges to today's manufacturers. By using a resolution III experiment together with degradation test, Tseng, Hamada, and Chiao (1995) presented an interesting case study of improving the reliability of fluorescent lamps. However, in conducting such an experiment, they did not address the problem of how to choose the optimal settings of variables, such as sample size, inspection frequency, and termination time for each run, which are influential to the correct identification of significant factors and the experimental cost. Assuming that the product's degradation paths satisfy Wiener processes, this paper proposes a systematic approach to the aforementioned problem. First, an intuitively appealing identification rule is proposed. Next, under the constraints of a minimum probability of correct decision and a maximum probability of incorrect decision of the proposed identification rule, the optimum test plan (including the determinations of inspection frequency, sample size, and termination time for each run) can be obtained by minimizing the total experimental cost. An example is provided to illustrate the proposed method. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 514–526, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10024     

On the availability of R out of N repairable systems

An R out of N repairable system consisting of N components and operates if at least R components are functioning. Repairable means that failed components are repaired, and upon repair completion they are as good as new. We derive formulas for the expected up‐time, expected down‐time, and the availability of the system, using Markov renewal processes. We assume that either the repair times of the components are generally distributed and the components' lifetimes are exponential or vice versa. The analysis is done for systems with either cold or warm stand‐by. Numerical examples are given for several life time and repair time distributions. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 483–498, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10025     

Two‐stage component test plans for testing the reliability of a series system

A system reliability is often evaluated by individual tests of components that constitute the system. These component test plans have advantages over complete system based tests in terms of time and cost. In this paper, we consider the series system with n components, where the lifetime of the i‐th component follows exponential distribution with parameter λ_i. Assuming test costs for the components are different, we develop an efficient algorithm to design a two‐stage component test plan that satisfies the usual probability requirements on the system reliability and in addition minimizes the maximum expected cost. For the case of prior information in the form of upper bounds on λ_i's, we use the genetic algorithm to solve the associated optimization problems which are otherwise difficult to solve using mathematical programming techniques. The two‐stage component test plans are cost effective compared to single‐stage plans developed by Rajgopal and Mazumdar. We demonstrate through several numerical examples that our approach has the potential to reduce the overall testing costs significantly. © 2002 John Wiley & Sons, Inc. Naval Research Logistics, 49: 95–116, 2002; DOI 10.1002/nav.1051     

液体火箭发动机非线性燃烧不稳定过程的并行仿真

采用计算燃烧学方法对火箭发动机非线性燃烧不稳定工作过程进行了并行数值模拟。气相控制方程组用欧拉坐标系下的Navier Stokes方程组描述 ,液相控制方程组在Lagrangian坐标系下进行描述。气、液两相作用通过方程组的源项互相耦合。编制了串行和并行程序 ,并在并行计算环境下进行了测试。从计算结果可以看出并行计算的效率较高。     

基于层次分析法的人为电磁环境复杂程度评估

针对战场电磁环境复杂多变,定性、定量描述难的特点,运用层次分析法(AHP)探索人为电磁环境复杂程度评估问题。建立了评估人为电磁环境的递阶层次结构,细化了评估指标,明确了评价标准,并通过对组合权重的计算,最终将对人为电磁环境复杂程度的评估转换为13个底层参量的检测数据,4个分值标准和5个评定层次。该方法对评估电磁环境的一般复杂性和特定复杂性具有一定的指导意义,较好地满足了战场电磁环境复杂程度评估的需求。     

ISDT算法的数据压缩处理及其性能分析

过程数据的实时压缩和趋势提取可以显著提高过程控制系统的整体性能.传统的SDT数据压缩算法不能很好地适应现今过程控制的要求,无法获得满意的压缩结果.针对SDT算法的弊端,提出了一种改进的SDT数据压缩算法,并进行了两种算法的性能对比.对合成数据仿真计算的分析结果表明,基于ISDT算法的过程数据压缩性能有大幅度的提高,更好地满足了现今过程控制中实时数据处理和趋势分析的要求.     

枪械产品故障树的模糊分析

事件发生概率的获取是故障树分析(FTA)中的重要环节,然而在一些故障发生频率很低的场合,要获得大量的故障数据几乎是不可能的,传统的故障树分析把事件发生的概率处理成精确值,忽略了数据的不完备性及环境的模糊性.针对这一问题,在枪械产品的可靠性研究中提出了模糊故障树分析方法,将现有统计数据和工程技术人员的经验结合起来,在容许误差范围内,求解出了事件发生概率的取值空间,使结果更接近实际情况.     

Systems composed of two types of nonidentical and dependent components

A coherent system of order n that consists two different types of dependent components is considered. The lifetimes of the components in each group are assumed to follow an exchangeable joint distribution, and the two random vectors, which represent the lifetimes of the components in each group are also assumed to be dependent. Under this particular form of dependence, all components are assumed to be dependent but they are categorized with respect to their reliability functions. Mixture representation is obtained for the survival function of the system's lifetime. Mixture representations are also obtained for the series and parallel systems consisting of disjoint modules such that all components of Type I are involved in one module (subsystem) and all components of Type II are placed in the other module. The theoretical results are illustrated with examples. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 388–394, 2015