可靠度限制下相控阵雷达天线阵面T/R单元维修模型

为了描述维修活动对相控阵雷达天线阵面系统的影响,构建了以可靠度为基础的“修旧不如新”定期维修优化模型。对相控阵雷达T/R单元失效下的天线性能参数进行分析,根据指标确定系统不能正常工作的失效T/R单元阈值; 针对大部分维修活动都难以使T/R单元修复如新的事实,引入失效率递增因子,在系统一定的可靠度水平上,以相控阵雷达系统的使用可用度和维修费用率为优化决策参数,建立了系统的维修优化模型,并运用边际效能算法对系统的最佳预防换件维修周期和换件维修组数量进行求解。实例运算结果表明,该模型突破了已有模型“修旧如新”的限制条件,更符合实际,能为维修策略的制定提供理论依据。     

Stage life testing

In progressive censoring, items are removed at certain times during the life test. Commonly, it is assumed that the removed items are used for further testing. In order to take into account information about these additional testing in inferential procedures, we propose a two‐step model of stage life testing with one fixed stage‐change time which incorporates information about both the removed items (further tested under different conditions) and those remaining in the current life test. We show that some marginal distributions in our model correspond either to progressive censoring with a fixed censoring time or to a simple‐step stress model. Furthermore, assuming a cumulative exposure model, we establish exact inferential results for the distribution parameters when the lifetimes are exponentially distributed. An extension to Weibull distributed lifetimes is also discussed.     

Some new results on the preservation of the NBUE and NWUE aging classes under the formation of coherent systems

We consider the classical problem of whether certain classes of lifetime distributions are preserved under the formation of coherent systems. Under the assumption of independent and identically distributed (i.i.d.) component lifetimes, we consider the NBUE (new better than used in expectation) and NWUE (new worse than used in expectation) classes. First, a necessary condition for a coherent system to preserve the NBUE class is given. Sufficient conditions are then obtained for systems satisfying this necessary condition. The sufficient conditions are satisfied for a collection of systems which includes all parallel systems, but the collection is shown to be strictly larger. We also prove that no coherent system preserves the NWUE class. As byproducts of our study, we obtain the following results for the case of i.i.d. component lifetimes: (a) the DFR (decreasing failure rate) class is preserved by no coherent systems other than series systems, and (b) the IMRL (increasing mean residual life) class is not preserved by any coherent systems. Generalizations to the case of dependent component lifetimes are briefly discussed.     

机载MIMO雷达稳健非均匀样本选择方法

针对杂波训练样本中混入干扰目标,导致空时自适应处理技术的杂波抑制性能下降问题,提出一种基于目标知识进行局部稀疏恢复的稳健训练样本挑选方法。该方法利用先验知识确定待检测单元中的目标区域,对整个角度-多普勒平面进行遍历,获得稀疏超完备基。通过变换矩阵对超完备基中对应的目标区域进行"挖空"处理,局部稀疏恢复出超分辨的杂波空时谱,获得杂波协方差矩阵估计。结合广义内积算法,实现非均匀训练样本挑选的过程。与常规结合广义内积方法相比,该方法对于不同干扰强度的训练样本,均有良好的检测效果。经仿真验证,所提方法的检验统计量之间区分度更加明显,对于干扰样本的挑选更加彻底,从而有效地提高了空时自适应处理技术的目标检测性能。     

箭(弹)级间螺栓法兰连接结构冲击失效实验与数值仿真

基于火箭(导弹)级间螺栓法兰连接结构,简化设计并制作了一组原理性实验件,利用ABAQUS软件建立有限元模型,设计并进行了多次落锤冲击失效实验,其中包括轴向和横向两种工况,考虑了螺栓均布与非均布、螺栓直径和螺栓-栓孔间隙等不同结构特点。实验过程中采集了螺栓力时程响应数据、柱段关键点应变时程响应数据、锤头冲击力和冲击速度及连接界面开缝位移等多组数据。根据实验效果和实测数据,分析了连接结构冲击失效机理,并对比验证发现有限元模型数值模拟效果和精度与实验结果吻合较好。研究结论可为箭(弹)级间连接结构抗冲击设计提供参考。     

一起灭火器爆炸案的原因调查

全面调查和分析了某住宅公寓灭火器爆炸事故的事故原因及相关责任,得出造成灭火器爆炸的根本原因是灭火器所充装的ABC干粉存在严重质量问题的认定,并依据相关法律将该案件作为刑事案件移交公安部门。     

高校学生党员教育培训模式研究

要客观地了解当前学生党员的思想实际,把握教育对象存在的问题和自身特点,就必须加强调查研究,探索出解决问题的方法和教育培训模式,以确保高校培养出合格的高素质学生党员。     

Analysis and optimal design of discrete order picking technologies along a line

Order picking accounts for most of the operating expense of a typical distribution center, and thus is often considered the most critical function of a supply chain. In discrete order picking a single worker walks to pick all the items necessary to fulfill a single customer order. Discrete order picking is common not only because of its simplicity and reliability, but also because of its ability to pick orders quickly upon receipt, and thus is commonly used by e‐commerce operations. There are two primary ways to reduce the cost (walking distance required) of the order picking system. First is through the use of technology—conveyor systems and/or the ability to transmit order information to pickers via mobile units. Second is through the design—where best to locate depots (where workers receive pick lists and deposit completed orders) and how best to lay out the product. We build a stochastic model to compare three configurations of different technology requirements: single‐depot, dual‐depot, and no‐depot. For each configuration we explore the optimal design. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

新型逻辑器件与数字电子产品的系统集成研究

提出了一种实现电子产品系统集成和小型化的设计思想 ,探讨了采用FPGA (FieldPro grammableGateArray) ,SOC(System On a Chip) ,IP(IntellectualProperty)等新型逻辑器件以及EDA(ElectronicDesignAutomation)手段的设计方法 ,实现软硬件协同仿真、验证和电子虚拟样机以及设计重用的设计理念 ,为 2 1世纪智能电子产品的系统集成开辟了一条先进的技术途径。     

集团抽样方法在软件测试中的应用

针对大型软件走查工作量过大的问题,使用抽样调查的方法来改进走查方案,以便在满足一定精度的前提下大大减少工作量.