具有吞吐量和时延约束的软件无线电波形部署决策算法

针对当前具有吞吐量和时延约束的软件无线电波形部署决策算法在内存开销方面考虑的不足,提出一个更为通用的波形部署决策系统模型,将波形的处理开销、内存开销和通信带宽开销都纳入到波形部署决策过程中,并设计了一种基于动态规划的波形部署决策算法以最小化波形对平台各种计算资源的占用总和。仿真结果表明,内存对波形部署决策具有重要影响,与未考虑内存开销的解决方案相比,平台支持的平均最大波形数目和平均处理资源利用率均下降40%左右。     

A decomposition heuristic for the twin robots scheduling problem

This article provides an efficient heuristic based on decomposition for the twin robots scheduling problem (TRSP). TRSP concerns two moving robots executing storage and retrieval requests in parallel along a shared pathway. The depots are located at both ends of the line and a dedicated robot is assigned to each of them. While moving goods between their respective depots and some storage locations on the line, noncrossing constraints among robots need to be considered. Our heuristic uses a dynamic programming framework to determine the schedule of one robot while keeping the other one's fixed. It finds near‐optimal solutions even for large problem instances with hundreds of jobs in a short time span. © 2014 Wiley Periodicals, Inc. 62:16–22, 2015     

多全球导航卫星系统联合的探月飞行器轨道定位分析

针对探月飞行器月球公转轨道上的卫星导航定位问题,以高轨道飞行器卫星导航定位的研究为基础,采用多全球导航卫星系统联合定位的方法进行仿真。分析了载波功率与噪声功率密度比为15d BHz的弱信号捕获门限下,各系统联合定位时波束主瓣和旁瓣的可用性,同时对各系统联合情况下的精度因子值进行分析。仿真结果表明:当接收到的卫星天线辐射的主瓣和旁瓣信号均高于载噪比门限时,全球导航卫星系统的三系统或四系统的联合能满足实时定位条件;而旁瓣损耗不加以补偿时,接收信号载噪比低于门限并导致任意联合方式均无法完成定位。各系统联合的精度因子分析表明:单系统或双系统联合的几何精度因子变化剧烈,四系统联合相比三系统联合的几何精度因子下降16.93%;三系统联合定位方案中,美国全球定位系统、中国的北斗卫星导航定位系统与欧洲的伽利略卫星导航定位系统联合方案的几何精度因子值变化最平稳,为最佳选择。理论分析和仿真结果为探月飞行器定位技术研究和星载多系统接收机设计提供参考。     

指定目标不延误条件下的拦截决策算法

从现有的拦截排序准则出发,根据实际作战中进袭目标的特点,应用现代排序理论,分别建立了动态目标拦截排序模型和总损失最小化模型,给出相应的求解算法。最后实例计算得出模型既体现了现有的拦截准则,又对现有的准则进行了推广。     

舰载机多机一体化机务保障调度研究

针对舰载机多机一体化机务保障调度问题,以出树、入树的形式描述实际保障过程中并行工序的约束关系,以最大保障完工时间和资源负载均衡性为目标,构建了舰载机多机一体化机务保障非线性多目标混合流水车间调度模型,并设计了一种结合基于Insert的动态邻域爬山搜索策略和并行工序的同步化修正的Memetic算法求解该模型。最后通过实例仿真验证了模型和所提算法的可行性和有效性。     

The Production and Deposition of the Guisborough Helmet

In September 1878 the British Museum received a donation of a folded metal plate which had been embossed and gilded. Restoration of the object revealed that the folded plate was in fact the outer casing of a Roman copper alloy cavalry sports type helmet which dates to the late second or third century AD. The story of what became known as the Guisborough helmet began 14 years earlier in what was then the North Riding of Yorkshire when workers employed by the Cleveland Railway Company discovered a ‘very curious plate of metal’ during road construction. It appears that the helmet was deliberately prepared for deposition and buried at a depth of c30 cm close to a stream. Examination by the authors suggests that this was a high value item that had been repaired many times. Experimental evidence suggests that the decoration alone required approximately 16 h to fashion.     

“It would be impossible to estimate the value of these works...” Mass Production at Springfield Armory during the American Civil War

The U.S. Armory in Springfield, Massachusetts, rarely appears in Civil War histories except perhaps as an unexplained statistical wonder. By late 1863, the Armory was the largest single supplier of rifles to Union forces. Springfield Armory workers out-produced over thirty American contractors, making more Army rifles at less cost while providing contractors with gauges, inspectors, and models, even though there were significant wartime private-sector mechanical innovations. This article identifies and explains the factors in the Armory’s success, provides context on contemporary American arms production and rifle models, and argues that the Armory’s methods and performance were among the first if not the first example of mass production in American small arms manufacture. The relative brevity of the Civil War episode, and the fact that it was not repeated in any comparable way at the Armory until World War II, has obscured its significance in American manufacturing history.     

基于发布订阅机制的态势信息实时分发框架

针对战场态势分发信息量大、实时性要求高、不同用户需求差异大的特点,提出了一种基于发布订阅机制的态势信息实时分发框架。构建态势元数据模型,能够描述战场态势信息和需求方的偏好,将态势更新看成发布事件,需求方看成订阅者,设计基于态势数据元模型设计合适的匹配算法。在此基础上给出了态势信息实时分发框架,能够指导构建面向服务架构的新型战场态势信息分发系统。     

一种改进的红外图像降噪算法与FPGA实现

由于实时目标的红外图像具有信噪比低、边界模糊等问题,在研究红外图像噪声特点的基础上,提出了一种基于动静态检测算法的红外图像降噪算法。通过一种动静态检测算法将图像分成动态图像和静态图像,用改进的自适应维纳滤波算法处理动态图像,用改进的NL-means降噪算法处理静态图像,并用FPGA实现红外图像降噪系统设计。实验表明,红外图像经算法处理后,其PSNR和细节方差-背景方差比(DV/BV)均高于经典降噪算法,算法能有效减少图像噪声,并能很好地保持图像的边界细节信息。     

变负载变转速输入泵控马达调速系统

行车取力泵控马达发电系统可以改变现有装备车辆供电模式。针对泵控马达系统存在转速和外接负载扰动的问题,以输入变转速变负载变量泵-定量马达恒速控制系统为研究平台,建立系统的流量模型,确定了对转速和负载扰动的控制策略以及相应的前馈补偿系数,采用了PID闭环控制与前馈补偿相结合的复合控制方法。并通过Matlab的Simulink模块对建立系统的仿真模型,得到了系统在转速和负载扰动下的控制规律,结果表明控制系统在两种扰动下反应迅速,最后通过实验验证,马达输出转速能保持在较理想的状态,为行车取力发电系统实现提供了借鉴意义。