脉冲末修弹落点预测导引方法研究

在分析剩余射程影响因素的基础上,以弹道特征参数弹道高y及速度矢量分量Vx和Vy为解释变量,以回归分析方法为数学工具,建立脉冲末修弹剩余射程预测模型。以目标点与弹丸预测落点之间的差值为广义弹道偏差,结合数值仿真,对落点预测导引进行深入研究,验证了回归分析模型的可行性。     

随动定向战斗部破片飞散特性研究

针对防空导弹常规破片式杀伤战斗部使用中存在能量利用率低的缺陷,提出采用随动定向战斗部的观点。建立随动定向战斗部的破片动态飞散区和飞散速度的计算模型,采用数值解析方法,解决在复杂弹目交会条件下破片的飞散区域与打击速度的计算问题．并用MATLAB软件对建立的模型进行验证,得出仿真结果与实际结果一致,这表明模型是合理、正确的。     

基于到达时差法的目标定位系统

运用声被动定位理论探索空中目标的定位问题。建立了一种平面波声被动定位模型,利用简易被动声传感器阵列,分析并设计了定位系统的总体结构。提出了一种简易的计算到达时差电路设计方案,此电路利于目标的实时定位。在利用这种系统定位远距离目标时,可消除有效声速的影响。最后给出了几组实验结果,证明了此系统的可行性,但对近距离目标的定位结果较差,模型需进一步研究。     

弹丸初速对磁阻型线圈发射器发射性能的影响分析

通过设置弹丸初速并研究其对单级磁阻型线圈发射器发射性能的影响,模拟分析前一级线圈弹丸出口速度对后一级线圈发射性能影响的规律;利用Ansoft有限元仿真软件进行了动态仿真,得到弹丸初速对单级磁阻型线圈发射器驱动电流、驱动线圈感应电压、电磁力、弹丸出VI速度、弹丸位移及能量转换效率等影响的规律．研究表明：弹丸初速越大,经过单级线圈加速后弹丸出口速度也越大,但弹丸出口速度增量减小;随着弹丸初速增大,能量转换效率呈现先增大后减小的趋势．     

爆炸成型弹丸贯穿靶板靶后破片空间分布模型

深空撞击载荷对探测小天体内部物质成分和结构特性具有重要意义,因此,在考虑爆炸成型弹丸(explosively formed projectile, EFP)可变截面的特性和区分靶后破片来源的基础上,建立了EFP贯穿靶板靶后破片空间分布模型。在靶板厚度30 mm至70 mm、EFP着靶速度1 650 m/s至1 860 m/s的条件下,该模型可以定量预测靶后破片云中各个破片的速度、质量、数量与空间位置的关系。结果表明,相对速度总是随相对空间位置的增加而呈线性增加,相对质量、相对数量总是随相对空间位置的增加而呈幂函数增加。     

Investigations on influence of rifle automatics system action on values of energetic efficiency coefficient of muzzle brakes

The objective of the paper was to compare values of the muzzle brake efficiency coefficient for a rifle with active or inactive automatics systems. Special laboratory stand designed for investigating the recoil process was used. The motion of the rifle was detected by the use of the laser interferometer and the optical camera. The recoil velocity time courses were determined by smoothing and differentiation of experimental position records. The results of the experiments indicated that in the case of an active automatics system two values of the recoil velocity can be used for calculation of the energetic efficiency coefficient: the maximum recoil velocity and the final recoil velocity at the end of the automatics action cycle. The values of the coefficient, calculated using these two values of the recoil velocity, distinctly differ. However, it was shown that their values indicate the same relation between the efficiency of various muzzle brakes. The value of the efficiency coefficient, determined on the basis of the final recoil velocity value, is practically the same as that determined on the basis of the final recoil velocity value for the rifle with an inactive automatics system.     

钢管在冲击荷载作用下的变形与失效破坏

为研究钢管在弹体侵彻过程中的变形特点,基于ANSYS/LS-DYNA软件,采用Johnson-Cook模型,模拟了半球形弹体以不同速度正向冲击钢管时的非线性动力响应情况。结果表明：弹体速度越小,钢管的抗侵彻性能越好;弹体速度越接近临界破坏速度,钢管降低弹体速度的能力就越明显;弹体冲击钢管时,钢管上表面比下表面更容易产生大变形,消耗更多的弹体动能,并在抗侵彻过程中伴有局部凹陷、蝶形变形和贯穿现象。实验结果可为圆柱壳结构钢管在冲击荷载作用下的耗能分析提供参考。     

基于随机拟合的悬浮式深弹弹阵特征建模＊

通过分析悬浮式深弹发射后在空中的弹道特性,建立了深弹弹着点坐标的计算模型。采取蒙特卡洛方法,分别对舰艇六自由度状态下,单管和六联装火箭深弹的弹着点坐标进行了仿真计算,对弹着点的分布规律进行了研究,并得出弹着点的联合密度函数。结果表明,在发射参数存在正态扰动时,弹着点散布区域均呈椭圆形分布,弹着点坐标均仍服从正态分布。     

新型舰炮使用测速雷达后观测距离偏差射击校正方法

针对测速雷达精确校正初速后的观测距离偏差校正方法进行研究,建立不同校正方法校正量计算模型,对比分析不同校正方法校正精度,得出了使用测速雷达精确校正初速后观测距离偏差应采用折合空气密度校正精度高的结论,为中大口径舰炮部队作战与训练和装备的研制改进提供依据。     

Study of nano-nitramine explosives: preparation,sensitivity and application

Nano-nitramine explosives (RDX, HMX, CL-20) are produced on a bi-directional grinding mill. The scanning electron microscope (SEM) observations show that the prepared particles are semi-spherical, and the narrow size distributions are characterized using the laser particle size analyzer. Compared with the micron-sized samples, the nano-products show obvious decrease in friction and impact sensitivities. In the case of shock sensitivities, nano-products have lower values by 59.9% (RDX), 56.4% (HMX), and 58.1% (CL-20), respectively. When nano-RDX and nano-HMX are used in plastic bonded explosives (PBX) as alternative materials of micron-sized particles, their shock sensitivities are significantly decreased by 24.5% (RDX) and 22.9% (HMX), and their detonation velocities are increased by about 1.7%. Therefore, it is expected to promote the application of nano-nitramine explosives in PBXs and composite modified double-based propellants (CMDBs) so that some of their properties would be improved.