漂浮式微型波力发电装置传动系统的速度分析与调节

针对边防驻岛官兵用电难的问题,结合海洋波浪能特点,提出了一种新型漂浮式微型波力发电装置。基于装置结构模型,分析了其结构特征和工作原理;建立了传动系统的运动学模型,分析了其运动特性和速度调节性能;进行算例分析,验证了理论模型的正确性。研究表明：双侧传动轮系输入系统优于单侧传动轮系输入系统;改变飞轮的转动惯量,可以调节速度的波动。分析结果为该装置的后续试验研究提供了理论依据。     

预应力CFRP筋T形梁受弯性能试验及变形分析

试验通过对3根T形预应力CFRP筋混凝土梁和1根矩形预应力CFRP筋混凝土梁进行对比,考察了预应力CFRP筋混凝土梁的受弯工作性能,记录了试验梁的开裂荷载、极限荷载和裂缝发展情况。试验结果表明：增加预应力度和总配筋率对提高开裂荷载,限制挠度、裂缝发展起重要作用;相同配筋的T形梁和矩形梁挠度相近,但各阶段荷载不同。对预应力CFRP筋T形梁的变形性能进行了理论分析,推导了短期荷载作用下刚度和挠度的计算公式,并将计算值与试验值进行比较,两者吻合良好。     

基于随机拟合的悬浮式深弹弹阵特征建模

通过分析悬浮式深弹发射后在空中的弹道特性,建立了深弹弹着点坐标的计算模型。采取蒙特卡洛方法,分别对舰艇六自由度状态下,单管和六联装火箭深弹的弹着点坐标进行了仿真计算,对弹着点的分布规律进行了研究,并得出弹着点的联合密度函数。结果表明,在发射参数存在正态扰动下,弹着点散布区域均呈椭圆形分布,弹着点坐标均仍服从正态分布。     

Dynamic analysis of a guided projectile during engraving process

The reliability of the electronic components inside a guided projectile is highly affected by the launch dynamics of guided projectile. The engraving process plays a crucial role on determining the ballistic performance and projectile stability. This paper analyzes the dynamic response of a guided projectile during the engraving process. By considering the projectile center of gravity moving during the engraving process, a dynamics model is established with the coupling of interior ballistic equations. The results detail the stress situation of a guided projectile band during its engraving process. Meanwhile, the axial dynamic response of projectile in the several milliseconds following the engraving process is also researched. To further explore how the different performance of the engraving band can affect the dynamics of guided projectile, this paper focuses on these two aspects: (a) the effects caused by the different band geometry; and (b) the effects caused by different band materials. The time domain and frequency domain responses show that the dynamics of the projectile are quite sensitive to the engraving band width. A material with a small modulus of elasticity is more stable than one with a high modulus of elasticity.     

Study of simple plane wave generator with an air-metal barrier

Plane wave generators (PWGs) are used to accelerate flyer plates to high velocities with their generated plane waves, which are widely used in the test of dynamic properties of materials. The traditional PWG is composed of two explosives with different detonation velocities. It is difficult to implement the related fabrication processes and control the generated waves due to its complicated structures. A simple plane wave generator is presented in this paper, which is composed of two identical cylindrical high explosive (HE) charges and an air-metal barrier. A theoretical model was established based on two different paths of the propagation of detonation waves, based on which the size of air-metal barrier was calculated for a given charge. The corresponding numerical simulations were also carried out by AUTODYN-2D^® based on the calculated results, which were used to compare with the theoretical calculations. A detonation wave with a flatness of 0.039 μs within the range of 70-percent diameter of the main charge was obtained through the simulations.     

基于FPGA的二维DCT／IDCT高速设计与实现

二维离散余弦／反余弦变换是图像处理算法的核心。基于DSP处理器或软件实现速度较低,以及ASIC实现芯片的面积和功耗都较大,本文研究了一种基于行列分解结构的二维DCT／IDCT变换,在两级一维DCT／IDCT变换之间插入双RAM结构,通过乒乓操作保证了前后级DCT／IDCT运算的并行性,提高了运算速度。电路结构在QuartusII中进行了逻辑综合,通过Modelsim编写激励对逻辑功能进行了仿真验证,并将仿真结果与Mat—lab仿真结果进行了比较。结果表明该模块功能正确,能够为图像处理提供良好的处理性能。     

液压平衡式发射装置自航发射内弹道模型与仿真

基于装备情况,探讨了潜艇液压平衡式发射装置自航发射鱼雷的可行方案,并建立了后端自流补水的自航发射方式的内弹道模型,进行了计算机仿真。通过试验结果描述鱼雷螺旋桨工作特性,分析了自航发射鱼雷出管速度偏低的原因,并提出改进措施。     

对典型结构弹体的电磁耦合规律数值分析

为了研究某型弹体的电磁耦合规律,利用电磁仿真软件FEKO建立弹体模型.研究得到:在弹体内部腔体存在谐振频点,存在电磁耦合场的增强区域;引信内部存在谐振频点,存在电磁耦合场的增强区域;弹体与引信壳体的屏蔽效能随频率变化的规律.     

弹丸飞行时间拟合误差对射击诸元误差的影响

分析了基本射表中弹丸飞行时间拟合误差对射击诸元误差的影响,给出了因时间拟合误差引起的射击误差的解析表达,并利用5条典型航路分析了飞行时间拟合误差对射角、射向误差的影响,得出了不同航捷、航高、斜距、目标速度下拟合误差对射击诸元误差的影响关系,从而为确定弹丸飞行时间拟合精度提供依据.     

浅析广域网加速设备对传输效率的优化

随着业务的发展和信息化建设步伐的加快,各级数据中心分支机构日益增多,网络内跨省、跨市之间需要进行大量的数据传输。这种“一对多”的数据服务,给各中心服务器和带宽带来了巨大的压力,严重影响了广域网数据传输和网上浏览的速度。深信服广域网加速设备提供的对广域网络传输和应用交互问题的一整套优化技术,具有良好的应用效果。