基于超动态测试系统的压力传感器标定技术研究

针对油气爆炸发展过程中压力测量的需要,提出了一种压力传感器标定的新方法。该方法基于超动态测试系统,操作简单,精度可靠,并采用最小二乘法对各测试点进行了拟合,得到了压力传感器的标定系数和其它基本性能指标,保证了测试过程中压力的准确性和精度。可在其它类似的测试系统中应用。     

最优化方法在摄像机标定中的应用

研究了最优化理论与方法在摄像机标定中的应用,并以两步法的第二步为例,详细介绍了如何根据最小化重投影误差这一非线性最小二乘问题求出所有标定参数的最优解,给出了用Guses-Newton法进行求解的具体步骤,并在Matlab下实现对一组初始数据的迭代优化.     

采用统计法装定系统误差

火控系统由于存在系统误差,现代坦克火控系统均设置了综合修正功能对系统误差进行补偿.现行的实弹射击综合修正量装定方法需要消耗大量弹药,且费时费力.对综合修正量的装定方法进行了分析,并参考美军的做法,提出采用统计法解决综合修正量装定的方案,并给出了该方案的理论基础和适合我军的改进措施.     

基于数字鉴频器的内燃机瞬时转速延时测量法

将基于数字鉴频器的延时法用于内燃机瞬时转速测量.首先介绍了延时法解调电路原理,然后使用仿真手段对延时法测量的特点进行了研究.仿真结果表明,该方法能够较好地还原频率调制信号,最后经实测试验证明了测量的有效性.该方法可采用全硬件电路实现,测量设备简单,可抑制调幅因素的影响,是一种有效的瞬时转速测试方法.     

Minimizing the makespan in open‐shop scheduling problems with a convex resource consumption function

We consider open‐shop scheduling problems where operation‐processing times are a convex decreasing function of a common limited nonrenewable resource. The scheduler's objective is to determine the optimal job sequence on each machine and the optimal resource allocation for each operation in order to minimize the makespan. We prove that this problem is NP‐hard, but for the special case of the two‐machine problem we provide an efficient optimization algorithm. We also provide a fully polynomial approximation scheme for solving the preemptive case. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

新型直升机旋翼系统减摆阻尼器动态性能研究

参照某型直升机旋翼系统对减摆阻尼器的结构及性能的要求,首次研制了一种金属橡胶-钢丝绳索型减摆器。通过粘弹等效阻尼测试,结果表明这种减摆器能满足技术指标要求,且具有减振效果更优、性能更稳定和环境适应能力更强等优点,为直升机旋翼系统减摆器的设计与制造提供了一种新技术思路。     

复合固体推进剂颗粒填充模型及其统计特性分析

复合固体推进剂属于高填充比颗粒类复合材料,氧化剂和金属颗粒在基体中的随机分布使其在细观尺度具有非均质的特点。从细观尺度研究固体推进剂燃烧及力学性能时,必须考虑颗粒级配、空间分布和种类等因素的影响。采用分子动力学方法,以硝酸酯增塑聚醚高能复合固体推进剂为研究对象,将固体颗粒模型化为球形,生成其在基体内随机分布的颗粒填充模型。利用Monte-Carlo算法模拟计算颗粒填充模型细观结构的两点概率函数,并研究了颗粒填充体积分数、尺寸与级配等参数对其的影响规律。从统计意义上给出具有各态历经性、统计均匀性和各向同性特点的颗粒填充构型最小周期性代表体元尺寸,可有效减小后续研究的计算量,节约计算成本。所构建的推进剂细观几何构型及对最小周期性代表体元尺寸的计算为后续开展复合固体推进剂细观尺度燃烧、燃面处铝团聚及力学性能数值研究奠定了基础。     

An efficient and modular modeling for launch dynamics of tubed rockets on a moving launcher

This paper develops a modular modeling and efficient formulation of launch dynamics with marching fire (LDMF) using a mixed formulation of the transfer matrix method for multibody systems (MSTMM) and Newton-Euler formulation. Taking a ground-borne multiple launch rocket systems (MLRS), the focus is on the launching subsystem comprising the rocket, flexible tube, and tube tail. The launching subsystem is treated as a coupled rigid-flexible multibody system, where the rocket and tube tail are treated as rigid bodies while the flexible tube as a beam with large motion. Firstly, the tube and tube tail can be elegantly handled by the MSTMM, a computationally efficient order-N formulation. Then, the equation of motion of the in-bore rocket with relative kinematics w.r.t. the tube using the Newton-Euler method is derived. Finally, the rocket, tube, and tube tail dynamics are coupled, yielding the equation of motion of the launching subsystem that can be regarded as a building block and further integrated with other subsystems. The deduced dynamics equation of the launching subsystem is not limited to ground-borne MLRS but also fits for tanks, self-propelled artilleries, and other air-borne and naval-borne weapons undergoing large motion. Numerical simulation results of LDMF are given and partially verified by the experiment.     

Static and free vibration analyses of functionally graded porous variable-thickness plates using an edge-based smoothed finite element method

The main purpose of this paper is to present numerical results of static bending and free vibration of functionally graded porous (FGP) variable-thickness plates by using an edge-based smoothed finite element method (ES-FEM) associate with the mixed interpolation of tensorial components technique for the three-node triangular element (MITC3), so-called ES-MITC3. This ES-MITC3 element is performed to eliminate the shear locking problem and to enhance the accuracy of the existing MITC3 element. In the ES-MITC3 element, the stiffness matrices are obtained by using the strain smoothing technique over the smoothing domains formed by two adjacent MITC3 triangular elements sharing an edge. Materials of the plate are FGP with a power-law index (k) and maximum porosity distributions (Ω) in the forms of cosine functions. The influences of some geometric parameters, material properties on static bending, and natural frequency of the FGP variable-thickness plates are examined in detail.     

Formation and characterization of core-shell CL-20/TNT composite prepared by spray-drying technique

The core-shell 2,4,6,8,10,12-Hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane/2,4,6-Trinitrotoluene (CL-20/TNT) composite was prepared by spray-drying method in which sensitive high energy explosive (CL-20) was coated with insensitive explosive (TNT). The structure and properties of different formulations of CL-20/TNT composite and CL-20/TNT mixture were characterized by scanning electron microscopy (SEM), Transmission electron microscopy (TEM), Laser particle size analyzer, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), differential scanning calorimetry (DSC), impact sensitivity test and detonation performance. The results of SEM, TEM, XPS and XRD show that ϵ-CL-20 particles are coated by TNT. When the ratio of CL-20/TNT is 75/25, core-shell structure is well formed, and thickness of the shell is about 20–30 nm. And the analysis of heat and impact show that with the increase of TNT content, the TNT coating on the core-shell composite material can not only catalyze the thermal decomposition of core material (CL-20), but also greatly reduce the impact sensitivity. Compared with the CL-20/TNT mixture (75/25) at the same ratio, the characteristic drop height of core-shell CL-20/TNT composite (75/25) increased by 47.6% and the TNT coating can accelerate the nuclear decomposition in the CL-20/TNT composites. Therefore, the preparation of the core-shell composites can be regarded as a unique means, by which the composites are characterized by controllable decomposition rate, high energy and excellent mechanical sensitivity and could be applied to propellants and other fields.