一种非接触性提取微弱振动信号的方法

在两个特定区域内,反射型光电开关器件距反射体间的距离与输出光电流成正比,本文利用这一特性构成测振系统,对微弱振动信号进行了非接触性提取研究。     

N+1式高频电力开关电源设计

探讨了N＋1式高频电力开关电源的组成和工作原理。开关电源由监控模块和整流模块组成,重点研究了均流技术和开关电源的抗干扰措施,论述了整流模块数量N＋1的选择。实际运行证明,N＋1式高频电力开关电源工作可靠,达到了预期效果。     

某型火箭弹电点火系统雷电辐照效应研究

利用LSG-8015型雷电浪涌发生器与平行板传输线配合模拟雷电电磁脉冲辐射场,对整装状态下水平放置的某型火箭弹进行了辐照试验。比较了不同放电电压下某型火箭弹电点火系统的感应电压波形,试验了短路防护卡对雷电电磁脉冲的防护性能,提出了某型火箭弹雷电电磁脉冲防护的思路和方法。     

Bayesian sampling plans for exponential distributions with interval censored samples

This article studies the problem of designing Bayesian sampling plans (BSP) with interval censored samples. First, an algorithm for deriving the conventional BSP is proposed. The BSP is shown to possess some monotonicity. Based on the BSP and using the property of monotonicity, a new sampling plan modified by the curtailment procedure is proposed. The resulting curtailed Bayesian sampling plan (CBSP) can reduce the duration time of life test experiment, and it is optimal in the sense that its associated Bayes risk is smaller than the Bayes risk of the BSP if the cost of the duration time of life test experiment is considered. A numerical example to compute the Bayes risks of BSP and CBSP and related quantities is given. Also, a Monte Carlo simulation study is performed to illustrate the performance of the CBSP compared with the BSP. The simulation results demonstrate that our proposed CBSP has better performance because it has smaller risk. The CBSP is recommended. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 604–616, 2015     

微波脉冲对硅基双极型晶体管的损伤特性（高功率微波技术研究所专题组稿）

利用微波脉冲注入实验平台,对硅基双极型晶体管低噪声放大器进行了损伤效应实验。在微波脉冲对硅基双极型晶体管低噪声放大器损伤的失效分析中,当低噪声放大器增益下降大于10 dB时,发现硅基双极型晶体管出现了永久损伤。通过对比测量硅基双极型晶体管损伤前后的电特性以及利用扫描电子显微镜（SEM）观测损伤后晶体管的微观特性,结果表明：硅基双极型晶体管被微波脉冲损伤后,基区的硅材料烧蚀导致发射结和集电结短路,不再具有PN结特性,导致器件失效。     

基于冲量法实现航天器编队重构控制仿真的研究

针对航天器编队重构的可视性不强,提出一种冲量法实现航天器编队重构的视景仿真技术。双脉冲机动是指航天器对空间目标的近轨道转移时,所需要的两次冲量机动。应用航天器之间相对运动原理,以空间目标轨道六要素为目标函数,通过调整航天器轨道参数对空间目标进行编队重构,有摆动绕飞转移至摆动式悬挂绕飞,进而得出了航天器转移摆动式悬挂绕飞编队到所需冲量基本关系,从而实现航天器对空间目标进行编队重构控制。     

基于混合高斯概率密度的加权打分方法

针对当前评比打分方法不能有效反映选手真实情况的问题,提出了一种基于混合高斯概率密度的加权打分方法。该方法的重点在于引入混合高斯分布来确定专家评分的权重。首先利用EM算法确定混合高斯分布模型参数,然后通过区间划分得到每个区间上的概率,再将专家打分映射到混合高斯概率密度函数区间上得到对应的权重,最后经加权求和得到选手的最终成绩。通过实例证明了该方法的合理性和公正性。     

多站时差与多参数联合分选定位方法

多站电子侦察系统中,两个观测站接收到的脉冲信号到达时间差可以用于分选和定位。针对复杂信号脉间信息关联性弱,不能对脉冲数极少的信号进行分选的问题,提出一种多站时差与多参数联合分选定位新方法。该方法利用时差窗先验信息,将主站和所有副站脉冲同时进行多站时差和多参数联合预分选,并将预分选结果按位置进行融合,得到最终分选和定位结果,能对脉冲数极少的信号进行分选定位,甚至可实现单个脉冲的分选定位。仿真结果表明了该方法的有效性。     

Radar pulse interleaving for multi‐target tracking

In a multifunction radar, the maximum number of targets that can be managed or tracked is an important performance measure. Interleaving algorithms developed to operate radars exploit the dead‐times between the transmitted and the received pulses to allocate new tracking tasks that might involve transmitting or receiving pulses, thus increasing the capacity of the system. The problem of interleaving N targets involves a search among N! possibilities, and suboptimal solutions are usually employed to satisfy the real‐time constraints of the radar system. In this paper, we present new tight 0–1 integer programming models for the radar pulse interleaving problem and develop effective solution methods based on Lagrangian relaxation techniques. © 2003 Wiley Periodicals, Inc. Naval Research Logistics, 2004.     

基于DRFM的机载PD雷达干扰研究

针对传统干扰技术对PD雷达干扰的不足,噪声干扰对干扰机功率要求高,欺骗干扰产生的干扰数目单一,基于当前对抗先进体制雷达的手段——DRFM,对PD雷达干扰进行研究。通过将截获的雷达信号存储、处理,按程序设定的转发间隔重复读出当前采样信号并转发,产生了多个距离欺骗假目标;通过对每次转发干扰进行频率调制,产生了包含距离速度欺骗的一系列假目标;并经过Matable仿真验证了在PD雷达窄带滤波器中,出现多个距离或速度欺骗假目标。并通过仿真验证了干扰的有效性。