无人炮塔系统关键技术组合分析

无人炮塔系统是未来火力系统发展的方向,在坦克和装甲车辆炮塔部分被命中概率高的现实情况下,无人炮塔对乘员来说相对安全。文章初步分析了无人炮塔系统的关键技术——遥控火炮技术和自动输弹技术实现的可能性和途径,并且针对在相同底盘上配置更大威力火炮的要求,探讨了膨胀波技术在无人炮塔上的应用。     

Research on design and firing performance of Si-based detonator

For the chip integration of MEMS (micro-electromechanical system) safety and arming device, a miniature detonator needs to be developed to reduce the weight and volume of explosive train. A Si-based micro-detonator is designed and fabricated, which meets the requirement of MEMS safety and arming device. The firing sensitivity of micro-detonator is tested according to GJB/z377A-94 sensitivity test methods: Langlie. The function time of micro-detonator is measured using wire probe and photoelectric transducer. The result shows the average firing voltage is 6.4 V when the discharge capacitance of firing electro-circuit is 33 μF. And the average function time is 5.48 μs. The firing energy actually utilized by Si-based micro-detonator is explored.     

非标准气象条件弹道自动修正的研究

针对某强击机瞄准具轰炸性能改进装置,介绍非标准气象条件下弹道修正原理工作式的建立、修正电路的设计及其与瞄准具的交联关系     

多点偏心起爆对破片速度增益的影响

多点偏心起爆后,爆轰波相互作用在定向区域内产生了马赫波超压,使得该区域破片速度产生增益.利用爆轰波反射理论,建立多点偏心起爆后爆轰波相互作用特性的理论模型,并确定定向区内破片速度的增益特性.3种不同起爆方式的仿真计算和静爆试验结果对比表明,定向区内不同起爆方式得到的破片增益程度较为吻合.     

集热罩对喷头启动时间影响的数值模拟研究

通过分析大空间场所的特点,并选择FDS软件作为研究工具分别对集热罩边长为200、400、600、800mm;边缘厚度为40、50、60mm;喷头距火源的垂直高度为6、7、8、9m;喷头在火源正上方以及与火源的水平间距为2.2m时喷水灭火系统喷头启动时间进行模拟,通过对比分析集热罩对大空间场所中喷头的作用效果,为集热罩的设计提供指导。     

利用时间窗权重进行航迹关联

提出一种利用传感器测量数据的时间窗权重进行航迹关联的方法,将目标运动状态的多维向量(如距离、方位角、俯仰角等)分解为多个一维状态标量;根据每个状态标量与时间的关系,提取两条航迹的共同测量时间区间,将其划分为若干个时间窗,计算对应时间窗内的权重;根据时间窗权重差计算每一个状态标量的航迹相似度;应用DS理论或Bayes理论进行航迹关联决策。     

无源探测定位网

介绍了无源探测定位网的特点和分类,对无源探测定位网的关键技术进行了研究,并对无源探测定位网的发展前景进行了预测.     

Algorithms for computing waiting time distributions under different queue disciplines for the D-BMAP/PH/1

A queueing system characterized by the discrete batch Markovian arrival process (D-BMAP) and a probability of phase type distribution for the service time is one that arises frequently in the area of telecommunications. Under this arrival process and service time distribution we derive the waiting time distribution for three queue disciplines: first in first out (FIFO), last in first out (LIFO), and service in random order (SIRO). We also outline efficient algorithmic procedures for computing the waiting time distributions under each discipline. © 1997 John Wiley & Sons, Inc. Naval Research Logistics 44: 559–576, 1997     

Analysis of a finite‐buffer bulk‐service queue with discrete‐Markovian arrival process: D‐MAP/Ga,b/1/N

Discrete‐time queues with D‐MAP arrival process are more useful in modeling and performance analysis of telecommunication networks based on the ATM environment. This paper analyzes a finite‐buffer discrete‐time queue with general bulk‐service rule, wherein the arrival process is D‐MAP and service times are arbitrarily and independently distributed. The distributions of buffer contents at various epochs (departure, random, and prearrival) have been obtained using imbedded Markov chain and supplementary variable methods. Finally, some performance measures such as loss probability and average delay are discussed. Numerical results are also presented in some cases. © 2003 Wiley Periodicals, Inc. Naval Research Logistics 50: 345–363, 2003.     

Java语言在军用软件中的应用及实现方法

简要地分析了军用软件的现状和需求、Java语言的体系结构和系统特性、Java语言实时性的实现方法等。实时军用软件对开发语言的实时性要求很高,但是标准规范的Java语言本身不满足实时性能,因此,要想把Java语言应用到实时军用软件中必须首先解决Java语言的实时性的问题。