高能电磁脉冲武器对计算机系统的毁伤及防护措施

探讨了国外军事强国在高能电磁脉冲武器毁伤计算机系统及计算机防护的研究领域的发展状况,介绍了近年来高能电磁脉冲武器毁伤计算机系统的作用机理、破坏作用,尤其是对C4I计算机系统的破坏,对计算机抗毁防护技术做了详尽的介绍.建议我国应该进入相关研究领域,并持续跟踪、研究各国先进技术,以引起我国对此项研究的重视,为加强抗毁伤技术提供信息.     

Algorithms for computing waiting time distributions under different queue disciplines for the D-BMAP/PH/1

A queueing system characterized by the discrete batch Markovian arrival process (D-BMAP) and a probability of phase type distribution for the service time is one that arises frequently in the area of telecommunications. Under this arrival process and service time distribution we derive the waiting time distribution for three queue disciplines: first in first out (FIFO), last in first out (LIFO), and service in random order (SIRO). We also outline efficient algorithmic procedures for computing the waiting time distributions under each discipline. © 1997 John Wiley & Sons, Inc. Naval Research Logistics 44: 559–576, 1997     

Single machine sequencing with linear models of release dates

The paper deals with a problem of scheduling a set of jobs on a single machine. Before a job is released for processing, it must undergo some preprocessing treatment that consumes resources. It is assumed that the release date of a job is a linear decreasing continuous function of the amount of a locally and globally constrained, continuously divisible resource (e.g., energy, catalyzer, financial outlay, gas). The problem is to find a sequence of jobs and a resource allocation that will minimize the maximum job completion time. Such a problem appears, for example, in the ingot preheating and hot-rolling process in steel mills. It is shown that the problem is strongly NP-hard. Some polynomially solvable cases of the problem and approximate algorithms with both experimental and worst-case analysis are presented. © 1998 John Wiley & Sons, Inc. Naval Research Logistics 45: 99–113, 1998     

Probabilistic analysis of an asymptotically optimal solution for the completion time variance problem

Scheduling a set of n jobs on a single machine so as to minimize the completion time variance is a well‐known NP‐hard problem. In this paper, we propose a sequence, which can be constructed in O(n log n) time, as a solution for the problem. Our primary concern is to establish the asymptotical optimality of the sequence within the framework of probabilistic analysis. Our main result is that, when the processing times are randomly and independently drawn from the same uniform distribution, the sequence is asymptotically optimal in the sense that its relative error converges to zero in probability as n increases. Other theoretical results are also derived, including: (i) When the processing times follow a symmetric structure, the problem has 2^{⌊(n−1)/2⌋} optimal sequences, which include our proposed sequence and other heuristic sequences suggested in the literature; and (ii) when these 2^{⌊(n−1)/2⌋} sequences are used as approximate solutions for a general problem, our proposed sequence yields the best approximation (in an average sense) while another sequence, which is commonly believed to be a good approximation in the literature, is interestingly the worst. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 373–398, 1999     

一种小型的高压毫微秒脉冲发生器及其应用

本文讨论了一种小型的高压毫微秒脉冲装置。该装置可以产生幅值120kV,上升前沿陡度大于5kV/ns、脉宽100ns 的高压脉冲,并已被用作REB 加速器的触发源、高压EMP 模拟器的脉冲源和研究介质击穿特性的能源。     

磁致伸缩扭转导波小管径弯管检测

针对扭转导波对小管径弯管的检测问题,分别采用数值模拟和实验方法进行研究。使用ANSYS软件模拟扭转导波在弯管中的传播;设计一种针对小管径管道的磁致伸缩扭转导波检测传感器,并对弯管进行检测,建立该传感器的导波激发和接收模型,利用理论模型对实验信号进行解读。研究结果表明:T(0,1)模态导波在小管径管道弯头处发生模态转换,部分T(0,1)模态转换成F(1,1)模态,F(1,1)模态具有方向性,垂直于弯头拱背-拱腹方向;模态转换会造成检测信号的双端面反射现象,第二个端面回波与第一个端面回波幅值比随频率的增大呈减小趋势;传感器激发出的纵向磁致伸缩力会导致实验信号中出现少量纵向模态导波。研究结论为磁致伸缩扭转导波对小管径弯管的检测提供理论指导。     

不可能差分分析时间复杂度通用计算公式的改进

研究Boura等和Derbez分别提出的不可能差分分析时间复杂度计算公式,根据实际攻击过程优化密钥排除的步骤,给出不可能差分分析实际攻击的时间复杂度计算的改进公式,进而利用两个分组密码算法模型将改进后公式计算的实际结果分别与Boura等的公式和Derbez的公式的计算结果进行对比,结果表明Boura等的公式计算结果既可能高于优化公式的实际分析计算的结果,也可能低于优化公式的实际分析计算的结果,而在轮子密钥独立时改进后公式的实际计算结果是Derbez公式的计算结果的2-1.2倍。     

机体/推进一体化飞行器动导数频域计算方法

运用Etkin非定常气动力模型,将谐波平衡法应用于复杂外形动导数辨识。计算结果表明:谐波平衡法和时域方法的动导数辨识结果一致,与实验值吻合,验证了程序的正确性和谐波平衡法的可靠性。采用谐波平衡法对类X-51高超声速机体/推进一体化飞行器WR-A进行动导数辨识,并与时域方法的计算结果比较,考察了该方法在复杂外形下数值模拟非定常流动和动导数辨识的能力。实验结果表明:对于WR-A这种复杂外形飞行器,谐波平衡法也能在保证精度的同时具有较高的计算效率。     

电磁轨道发射中内弹道动力响应特性分析

将轨道简化为移动载荷作用下固定在弹性支撑上的Bernoulli-Euler梁,通过静态电磁-结构耦合有限元模型求得外围封装的等效刚度,计算得到发射器的临界速度。另外,利用混合有限元/边界元法建立电磁-结构-运动多物理场耦合的动力学模型,求得枢轨动态接触压力和轨道的应力应变分布特性。通过在轨道背面布置光纤光栅应变传感器,利用测量数据验证了动力响应特性,并分析了弹丸在内弹道的稳定性。针对典型30 mm × 30 mm矩形口径发射器,分析及试验结果表明：C型电枢对轨道的电磁挤压力在平顶沿起始时刻达到最大值,之后随着时间推移逐渐减小;电枢通过引起的应力波在高速段容易与轨道中反射应力波发生共振,并且轨道在电枢运动的中间高速段区域受力最为集中,应力集中水平约是起始低速段区域的2.44倍;电枢运动高速段会出现晃动现象,进而引起上下轨道受力的不对称性。分析及试验结果对研究电磁轨道发射器内弹道动力响应特性和发射器结构设计具有重要指导意义。     

利用过阻尼电路合成高压方波脉冲

在过阻尼RLC电路分时放电的基础上,提出新型高压方波脉冲产生方法。理论分析表明:过阻尼RLC电路产生的双指数电压波与脉冲形成线产生的方形电压波具有类似的上升沿和平顶。电路模拟表明:通过人工过零技术可以对双指数电压波进行截尾,从而形成完整的高压方波脉冲。建立了原理验证性样机,由两组RLC电路构成,每组电路包含一台脉冲电容器和一只三电极场畸变气体开关,两组电路共用一个上升沿调节电感。实验证明:样机可以在电阻负载上输出幅值为17 kV、平顶宽度为330 ns～5.8μs、上升沿为100～350 ns的单极性高压方波脉冲。该方法适应性强,对负载变化不敏感,同时具有良好的可调节性,方波上升沿、平顶宽度连续独立可调。