NCO相位截断对频域抗干扰性能影响分析

频域抗干扰易于工程实现、窄带干扰抑制性能好,是目前全球卫星导航系统(Global Navigation Satellite System,GNSS)抗干扰接收机中广泛采用的抗干扰算法。频域抗干扰接收机普遍采用数控振荡器(numerically controlled oscillator, NCO)生成本振信号。由于硬件约束,通常需要对NCO进行相位截断。而NCO相位截断是否合理对抗干扰性能影响较大。针对该问题,从NCO相位截断导致的本振杂散着手,从理论上分析其对混频和频域抗干扰环节的影响。在此基础上,给出一种NCO查找表地址位宽的理论计算模型,使得接收机的载噪比损耗接近无NCO相位截断的频域抗干扰接收机。仿真表明,抑制带宽大于100kHz、干信比小于80dBc的窄带干扰时,计算的NCO查找表地址位宽不超过10bit。无NCO相位截断的频域抗干扰接收机相比,采用NCO混频的抗干扰接收机的载噪比损耗最多增加0.6dB。     

基于搜索论的远程反舰导弹搜捕概率建模方法

针对传统捕捉概率模型难以满足远程反舰导弹机动搜捕概率建模计算的问题,提出利用搜索论进行导弹机动搜捕概率计算的建模方法。该方法根据目标机动规律建立其分布概率密度函数,并依据末制导雷达发现目标概率的"倒四次方律"及弹目相对运动轨迹,构建其探测函数,通过求取两者之积的积分实现搜捕概率计算。计算结果显示:若远程反舰导弹不采取机动搜捕策略,目标指示误差增加1km时搜捕概率降低0.47,目标速度增加10节时搜捕概率降低0.3,末制导雷达搜索半径减小50%时搜捕概率降低0.3;若采取平行搜捕策略,上述因素对其影响大幅下降。可见,该方法综合考虑了目标机动规律、传感器探测规律、导弹搜捕策略,可实现远程反舰导弹机动搜捕概率的解算。     

激励器结构参数对合成射流影响的试验研究

为了设计高性能的合成射流激励器,实验采用热线风速仪测量激励器出口的流动速度,对不同大小激励器、不同出口形状激励器、单 双膜激励器以及金属振动膜处于不同装配受压状态下的激励器分别进行了试验。实验结果显示:激励器的结构决定了合成射流激励器的性能;激励器出口射流平均速度除了与激励器大小、出口面积有关外,还与出口形状有关,采用方孔 矩形孔形式的开口有利于建立较强的合成射流;双膜与单膜工作相比,合成射流最大速度基本上是成两倍关系;金属振动膜的安装形式(受压状态)不影响合成射流随频率的变化规律,但对合成射流速度影响很大,当激励器振动膜处于螺栓拧紧受压状态时,与振动膜不受压状态相比,合成射流出口速度几乎下降了一个数量级。     

基于任务和角色的分布式工作流安全模型

针对现有基于角色访问控制的缺陷和分布式工作流管理系统的特性,在传统的基于角色的访问控制模型中引入任务集(Tasks)、任务实例集(TaskInstances)和任务上下文(TaskContext)的概念,将传统的user role permission权限赋予结构修改为user role task permission权限赋予结构,建立了基于任务和角色的访问控制模型,给出了其形式化定义。该模型解决了传统的基于角色访问控制中的动态适应性差和最小权限约束假象的问题,用于分布式工作流管理系统,提高了安全性、实用性。     

Optimal inventory control policy for periodic‐review inventory systems with inventory‐level‐dependent demand

We consider a setting in which inventory plays both promotional and service roles; that is, higher inventories not only improve service levels but also stimulate demand by serving as a promotional tool (e.g., as the result of advertising effect by the enhanced product visibility). Specifically, we study the periodic‐review inventory systems in which the demand in each period is uncertain but increases with the inventory level. We investigate the multiperiod model with normal and expediting orders in each period, that is, any shortage will be met through emergency replenishment. Such a model takes the lost sales model as a special case. For the cases without and with fixed order costs, the optimal inventory replenishment policy is shown to be of the base‐stock type and of the (s,S) type, respectively. © 2012 Wiley Periodicals, Inc. Naval Research Logistics, 2012     

Partial equilibrium in risk‐based production decisions

Characteristically, a small subset of operational problems admit risk neutrality when contingent claims methodology were used in their analysis. That is, for the majority of manufacturing and production problems, operating cash flows are not directly linked to prices of traded assets. However, to the extent that correlations can be estimated, the methodology's applicability to a broader set of operational problems is supported. Our article addresses this issue with the objective of extending the use of contingent claims techniques to a larger set of operational problems. In broad terms, this objective entails a partial equilibrium approach to the problem of valuing uncertain cash flows. To this end, we assume risk aversion and cast our approach within Merton's intertemporal capital asset pricing model. In this context, we formulate a “generic” production valuation model that is framed as an exercise in stochastic optimal control. The model is versatile in its characterization and can easily be adapted to accommodate a wide‐ranging set of risk‐based operational problems where the underlying sources of uncertainty are not traded. To obtain results, the model is recast as a stochastic dynamic program to be solved numerically. The article addresses a number of fundamental issues in the analysis risk based decision problems in operations. First, in the approach provided, decisions are analyzed under a properly defined risk structure. Second, the process of analysis leads to suitably adjusted probability distributions through which, appropriately discounted expectations are derived. Third, through consolidating existing concepts into a standard and adaptable framework, we extend the applicability of contingent claims methodology to a broader set of operational problems. The approach is advantageous as it obviates the need for exogenously specifying utility functions or discount rates.© 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

列车用复合材料阻燃性能研究

不同类别的阻燃剂配合使用能产生协效作用,大大提高阻燃效果。在甲基丙烯酸类不饱和聚酯树脂9001基体中,添加微囊化红磷/氢氧化铝/三氧化二锑/甲基膦酸二甲酯(MRP/Al(OH)3/Sb2O3/DMMP)阻燃剂体系,对其树脂体系固化物及玻璃纤维织物复合材料的力学性能和阻燃性能进行了实验研究,提出了一种有望用于列车复合材料大尺寸构件制造的性能优异、价格低廉的新体系。结果表明,当质量添加比例分别为12%MRP、50%Al(OH)3、2%Sb2O3时,树脂体系室温粘度100mPa.s左右,凝胶时间超过80min,适用于RTM和VIMP等大尺寸构件成型工艺;复合材料拉伸强度215.4MPa,弯曲强度177.15MPa,拉伸模量13.85GPa,弯曲模量13.36GPa,氧指数39.7。     

组网雷达的改进粒子滤波算法

针对现代战争中有源雷达容易受到干扰和反辐射导弹的摧毁,以及无源雷达隐蔽性高,只能测量方位角度,测量精度小等特点,提出利用集中式有源雷达系统与无源雷达系统协同组网对目标进行跟踪。但是在实际环境中,噪声属性以及有源雷达,无源雷达接收信号的特点决定了组网雷达需要应用非线性滤波技术对信号进行处理。传统的非线性技术包括卡尔曼滤波、扩展卡尔曼滤波(EKF)或无迹卡尔曼滤波(UKF)等方法。非线性近似过程带来的误差相对较大,而且均要求观测噪声和过程噪声为独立或相关的高斯白噪声。而粒子滤波避免了传统非线性滤波方法的缺陷,但是存在粒子退化,于是用EKF和UKF在每一时刻更新粒子,用更新的粒子及其协方差构造重要性函数,然后重采样。仿真实验表明这两种改进粒子滤波方法有很好的效果。     

基于粒子群聚类的导弹直接侧向力模型辨识

为了充分挖掘数据的潜在规律,提出一种基于粒子群模糊C均值聚类的模型辨识方法,该方法首先对实验数据进行分类,得到最佳聚类数和聚类中心,然后对不同的类分别辨识.新数据可以根据到不同聚类中心的距离划分为不同的类,再根据该类的辨识模型得到输出结果.依据风洞实验数据,采用粒子群模糊聚类对直接侧向力模型进行了辨识,辨识结果表明,与直接辨识相比,该方法的辨识精度明显提高,其辨识结果可以为控制系统的设计提供依据.     

通气空泡与超音速尾喷流耦合作用实验研究

基于开放式水洞,构建了通气空泡与超音速尾喷流耦合作用实验系统。设计了四种可变长度实验模型,重点研究射流与通气空泡相对位置对空泡射流耦合作用机理的影响。针对不同外形实验模型,改变通气流量和射流流量,获得了不同工况下空泡界面瞬态演化规律。通过实验,观察到射流完全补气、射流部分泄气、射流完全泄气三种不同耦合作用模式。进一步结合实验数据和Paryshev理论分析,建立了不同模式下临界转变条件和空泡尺度计算模型。当≤0.1 时,空泡长度可用经典空泡经验公式来描述;当0.1<<1.5 时,空泡长度分为模型长度和尾部空泡长度两部分,而尾部空泡长度只与无量纲动量比有关;当 ≥1.5时,空泡闭合在喷管出口,空泡长度与模型长度相等。